Bafo BF-372B User manual

HDMI EXTENDER
User Manual
Bring High-Definition to your life!
HDMI Extender Over Single CAT6 With IR（60M）
(HDMI1.3V 3D Full HD 1080P)
BF-372B

HDMI Extender Over Single CAT6 With IR（
（
60M
Thank you for purchasing ourproduct. To ensure safety and many years' trouble-free
operation of the product, please read the manual carefullybefore using thisproduct.
1.0 INTRODUCTION
The HDMI to RJ45 Extender use single CAT6 or higher level cables up to
60 meters instead of
HDMI cable totransmit high definition signal, for cutting down cost. Long distance transmission
of high definition is very difficult because HDMI cable is very expensive and infrequent. The
Extender is designed to supply for long distance transmission of high definition signal.
1. Signal transmission : CAT6 or higher level cables up to 60 meters instead of HDMI
cables are connected between TX and RX Extender.
2. Support HDMI1.3, HDCP 1.2 protocol compliant.
3. Support video input : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i.
4. Support video output : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i.
5. Support CEC.
6. Support 20~60KHz IR working.
7. Audio format support : DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD.
8. No loss of quality.
9. Installs in minutes.
10. Need DC5V/1A power supply.
2.0 FEATURES
3.0 PACKAGING ACCESSORIES:
When first unpacking your extender please check to see if the following items are included:
Length of CAT6 cable between Transmitter and Receiver ----------------------------- Up to 60 meters
HDMI Input -------------------------------------------- 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format input ------------------ DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
HDMI Output ------------------------------------------ 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format output ------------------------------------------------- LPCM7.1/DTS/Dolby-AC3/DSD
Max bandwidth ------------------------------------------------------------------------------------------------- 165MHz
Max baud rate ----------------------------------------------------------------------------------------------- 4.95Gbps
1.HDMI Transmitter ------------------------------------------------------------------------------------------
2.HDMI Receiver ---------------------------------------------------------------------------------------------
3.IR-TX ----------------------------------------------------------------------------------------------------------
4.IR-RX ----------------------------------------------------------------------------------------------------------
5.Power supply ------------------------------------------------------------------------------------------------
6.User manual -------------------------------------------------------------------------------------------------
1PCS
1PCS
1PCS
1PCS
2PCS
1PCS
4.0 SPECIFICATION
01

02
HDMI Extender Over Single CAT6 With IR（60M)
5.0 PANEL DESCRIPTIONS
Before installation, please make sure all devices you wish to connect have been turned off.
Input Video signal ----------------------------------------------------------------------------- 0.5~1.5Volts p-p
Output DDC signal ---------------------------------------------------------------------------- 5Volts p-p (TT1L)
Input/Output HDMI cable distance ------------------------------- ≤20m AWG26 HDMI standard cable
Max working current --------------------------------------------------------------------------------------- 800mA
Power adapter format ----------------------- Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1A
Operating Temperature range ------------------------------------------------------------------ (-15 to +55℃)
Operating Humidity range ------------------------------------------------ 5 to 90%RH (No Condensation)
-
DC/5V --------------------------------------------------------------------------------------------------------
Power ------------------------------------------------------------------------------------------------
HDMI IN ------------------------------------------------------------------------------------------------
IR-TX ---------------------------------------------------------------------------------------------------
CAT6 ------------------------------------------------------------------------------------------------------
EDID -----------------------------------------------------------------------------------------------
Power IN
Power Indicator
HDMI IN port
IR transmitter
CAT6 OUT
EDID copy button
IR-RX -------------------------------------------------------------------------------------------------------
CAT6 ----------------------------------------------------------------------------------------------------------
DC/5V --------------------------------------------------------------------------------------------------------
Power -------------------------------------------------------------------------------------------------
HDMI OUT ------------------------------------------------------------------------------------------
IR receiver
CAT6 IN
Power IN
Power Indicator
HDMI OUT port
HDMI EXTENDER TX PANEL
HDMI EXTENDER RX PANEL

6.0 CONNECT AND OPERATE
Before installation, please make sure all devices you wish toconnect have been turned off.
HDMI Extender Over Single CAT6 With IR（60M）
1. Connect HDMI signal source to the transmitter of HDMI extender.
2. Use CAT6 or higher level cables up to
60 meters to connect the transmitter and receiver of HDMI
Extender.
3. Connect the display equipment with HDMI connector tothe receiver of HDMI extender.
4. Power on all connected devices, choose the input of the display device to its HDMI channel.
The method of EDID copy of display terminal:
7.0 INSTALLATION AND PRECAUTIONS
To avoid electric shock, product damage and to protect your safety, please notice the following:
Connect the HDMI input port of the HDMI extender transmitter to the TV with the power adapter,
and press the EDID button on the transmitter for 1-3 seconds to complete the EDID copy.
1. Please slowly plug or unplug signal cables and do not often plug, unplug, or shake them.
2. The equipment should not be placed under the sun, rain and damp or unventilated environment.
3. Liquid items should not be placed on the equipment.
4. Do not install the equipment near heat sources such as fire, power, or other amplifiers that produce
heat.
5. Do not insert the metal or other objects tothe equipment in addition toconnecting cables to ports.
6. Do not demolish the equipment by yourself; it should be maintained by professional maintenance
staff.
03