Balboa Water Group 59340-01 User manual

Template 56377 10-05-12 59340-91_59342-01_59310_59371_97_C 10-17-19
1
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2009 Balboa Water Group.
BP200UX Tech Sheet
Customer: Balboa Water Group
Part Number: 59340-01 3.0kW 800 Incoloy
59371 3.0kW 825 Incoloy
59342-01 2.0kW 800 Incoloy
59310 Remote Heater System -- Heater is sold separately
Custom Box Overlay □
Box Overlay Part Number N/A
CE System Model For 2.0KW: BP2-BP200UX-RCA-2.0KW
CE System Model For 3.0KW: BP2-BP200UX-RCA-3.0KW
CE System Model For Remote: BP2-BP200UX-RCA
Software Version ID: M100_235 V52.0
Software Version: 52.0
File Name: BP200_52.0_BP200UX.hex
Configuration Signature: AE7D76E4
Eng. Project Number: 5270
Control Panels (See later pages for more information):
spaTouch™2 Any version (version 2.0 or later required for bba™2 fully integrated functionality)
Icon spaTouch™ Any version (version 3.36 or later required for bba™2 fully integrated functionality)
Menued spaTouch™ Any version (version 2.8 or later required for bba™2 integrated functionality)
TP800 Version 3.1 and later (Version 3.13 or later required for bba™; version 4.11 or later required for bba™2 integrated functionality)
TP600 Version 2.7 and later (Version 2.12 or later required for bba™/bba™2 On/Off control via menu)
TP500 Any version
TP400T CE Version 2.7 and later (TP400T US should not be used) (Version 2.12 or later required for bba™/bba™2 On/Off control via menu)
TP400W CE Version 2.7 and later (TP400W US should not be used) (Version 2.12 or later required for bba™/bba™2 On/Off control via menu)

Template 56377 10-05-12 59340-91_59342-01_59310_59371_97_C 10-17-19
2
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2009 Balboa Water Group.
System Revision History
Part # EPN Date Originator Changes Made
59340
59342
5205 06-25-19 BWG Generic BP200UX system, which is a combination of the BP200G1, BP200G2, and BP200G3 systems into one model with an
optional user-insstalled expander board (the expander board mounting hardware is pre-installed).
59340-01
59342-01
5270 09-05-19 BWG Update software for full TP500 compatibility.
59310 5270 09-05-19 BWG Added PN for version with remote heater support. Remote heater is sold separately.
““ 10-10-19 BWG Add line 3 info to 2/3x16A conversion instructions box.
59371 “ 10-17-19 BWG Added new 825 Incoloy system PN.
bba™ & bba™2 (Balboa Bluetooth Amp) connection is documented seperately.
bba™ is integrated into graphic display panels (TP800, TP900 and spaTouch™). With TP600/TP500/TP400, use the “BT” entry on the menu to toggle bba™ power On/Off.
bba™2 is integrated into graphic display panels (TP800, TP900 and spaTouch™). With TP600/TP500/TP400, use the “BT” entry on the menu to toggle bba™2 power On/Off.

Template 56377 10-05-12 59340-91_59342-01_59310_59371_97_C 10-17-19
3
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2009 Balboa Water Group.
Power Requirements:
Single Service [3 wires (line, neutral, ground)]
230VAC, 50/60Hz*, 1þ, 16A, (Circuit Breaker rating = 20A max.)
Single Service [3 wires (line, neutral, ground)]
230VAC, 50/60Hz*, 1þ, 32A, (Circuit Breaker rating = 40A max.)
2-out-of-3-Service [4 wires (line 1, line 2, no line 3, neutral, ground)]
230VAC line-to-neutral**, 50/60Hz*, 2/3þ, 16A, (Circuit Breaker rating = 20A max each phase line.)
NOTE: 2-out-of-Service is simply 3-Service (single common) with one of the three lines unused. The third line could be used for a slave heater if desired, or left for a use not
related to the spa at all.
*BP systems automatically detect 50Hz vs 60Hz. However, power frequency (50Hz vs 60Hz) is just one of many differences between North American (UL) and CE power, and it is
because of these other differences that different BP systems must be used for UL vs CE territories. Also, there are a few countries that use CE power but 60 Hz (such as South
Korea) which need CE systems, and a few countries that use UL power but 50 Hz which need UL systems.
** 3-phase service measured line-to-line will read about 400V, but BP systems do not use it line-to-line.
IMPORTANT - Service must include a neutral wire, with a line to neutral voltage of 230VAC.
Basic Functions Setup 1 - 7
HiPot Testing Note:
Disconnect slip terminal with green
wires from J6 prior to performing
HiPot test. Failure to disconnect may
cause a false failure of the test.
Reconnect terminal to J6 after
successful completion of HiPot test.

Template 56377 10-05-12 59340-91_59342-01_59310_59371_97_C 10-17-19
4
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2009 Balboa Water Group.
2-out-of-3-Service wiring options with Pump 2:
Pump 2 can either be wired to the Heater service or to the Pump 1 service.
If Pump 2 is wired to the Heater service, DIP Switch A8 ON (with other DIP swtiches OFF) makes Pump 2 shut OFF the heater, but lets Pump 1 run along with the Heater.
If Pump 2 is wired to the Pump 1 service, then the heater can always run (with DIP switches A2 and A3 both ON). However, in most cases DIP Swtich A5 also has to be ON,
which only allows either Pump 1 or Pump 2 (not both) to be at high speed at the same time The only case where DIP Switch A5 can be turned OFF is if both pumps are small
enough to fit in a single 16A service together with both pumps at high speed, together with any other equipment such as A/V.
When DIP switch A5 is ON, having one pump at high speed prevents you from turning the other pump to high speed. You have to turn the first pump to either low speed or OFF
before you can turn the other pump to high speed.
2-out-of-3-Service wiring options with Blower:
The Blower can either be wired to the Heater service or to the Pump 1 service.
If the Blower is wired to the Heater service, DIP Switch A8 ON (with other DIP swtiches OFF) makes the Blower shut OFF the heater, but lets Pump 1 run along with the Heater.
If the Blower is wired to the Pump 1 service, then the heater can always run (with DIP switches A2 and A3 both ON). However, in most cases DIP Swtich A5 also has to be ON,
which only allows either Pump 1 High or the Blower (not both) to run at a given time To determine whether DIP switch A5 can be turned OFF, add up the amperages of PUmp 1
High, the Blower, the Circ Pump (if any), the Ozone, and A/V (if any). If the sum of all this equipment is below 16A, DIP switch A5 can be trurned OFF.
When DIP swtich A5 is ON, the Blower is automatically turned OFF when Pump 1 goes to high speed. (If Pump 1 then goes to low speed or turns OFF, the Blower may turn back
ON automatically.)
2-out-of-3-Service wiring options without ether Pump 2 or Blower:
When not using either Pump 2 or Blower, ie in Setups 5 - 7, the heater can run at any time with either of the above DIP swtich settings.
Basic Functions Setup 1 - 7

Template 56377 10-05-12 59340-91_59342-01_59310_59371_97_C 10-17-19
5
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2009 Balboa Water Group.
System Ouputs: In Group 3:
Pump 1 230VAC 2-Speed 12A max 15-minute timer
30-minute timer for P1 Low in non-circ Setupa 2, 4 & 6 only
This is the heater pump in Setups 2 , 4 & 6.
Must deliver 20 GPM through heater
1-Speed in Setups 1, 3 & 5
Unused in Setup 7
Pump 2 230VAC 1-Speed 12A max 15-minute timer ----------------------------------- H
Used in Setups 1 & 2 only
Blower 230VAC 1-Speed 4A max 15-minute timer ----------------------------------- H
Used in Setups 3 & 4 only
Circ Pump 230VAC 1-Speed 2A max Programmable Filtration Cycles + Polling
This is the heater pump in Setups 1, 3, 5 & 7.
Must deliver 20 GPM through heater
Ozone 230VAC .5A max Slaved to Circ Pump in Circ Setups and to Pump 1 Low in Non-Circ Setups
Spa Light 10VAC On/Off 1A max 240-minute timer.
A/V (Stereo) 230VAC Hot 2A max Always on
Heater 3.0kW @ 240VAC max
Basic Functions Setup 1 - 7

Template 56377 10-05-12 59340-91_59342-01_59310_59371_97_C 10-17-19
6
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2009 Balboa Water Group.
Wiring Diagram for Integral Heater Version
Hardware Setup
1
2
3
1
2
J4
J8
J18
J51
J1
J27
J10
3
J20
J10 J12 J88
J52
GRN
230V 2/3þ 2/3x16A
A2
A3
ON OFF
A5
BLU
BRN 1
BRN 2
A8
A2
A3
ON OFF
A5
A8
FOR PUMP2 OR BLOWER
ON HTR SERVICE (BRN 1):
J3 WIRE FROM EXPANDER
BOARD MUST BE
WIRED TO AREA 2
FOR PUMP2 OR BLOWER
ON PUMP1 SERVICE (BRN 2):
J3 WIRE FROM EXPANDER
BOARD MUST BE
WIRED TO J55
BRN LINE 3 LINE 3 - CAP (INSULATE) END.
DO NOT CONNECT
J55
230V
1þ
1x16A
1x32A
BRN
BLU
GRN
BRN BLU
BRN 2 BRN 1 BLU
1 SERVICE 1X16A 1X32A
2 OUT OF 3 SERVICE 2/3X16A
LOCATION DEVICE MAX AMPS
J9 NETZSTROMVERSORGUNG 1/2-GESCHW.-PUMPE 1 12A
ALIMENTATION POMPE 1 A 1/2 VITESSES 1/2-SPD PMP 1 MAX
J15 10V BELEUCHTUNG ECLAIRAGE BAIN HYDRO SPA LIGHT 1A (@10V)
J19 KREISLAUF PUMPE POMPE DE CIRCULATION CIRC PUMP 2A MAX
J21 OZONGENERATOR GENERATOROZONE OZONE GENERATOR 0.5A MAX
J33 TV / AV 2A MAX
J11 & J13 HEATER 3.0 kW
SENSOR A
SENSOR B
3.0 kW HEATER
TORQUE RANGE FOR HEATER
CONNECTIONS: 30 TO 35
IN. LBS.
J3
PUMP 2 K1
J6
J2
W12 OPTIONAL EXPANDER X-P2151 PN 59233
LOCATION DEVICE VOLTS AMPS FROM TO FROM TO
J6 PUMP 2 230V 12A W12 AREA 3 J3 J55
CONNECT TO J55
CONNECT TO AREA 3
CONNECT TO J5
F5 15A 250V
EXPANDER
X-B2151
EXPANDER X-B
J3
BLOWER K1
J6
J2
W12 OPTIONAL EXPANDER X-B PN 59231
LOCATION DEVICE VOLTS AMPS FROM TO FROM TO
J6 BLOWER 230V 4A W12 AREA 3 J3 J55
CONNECT TO J55
CONNECT TO AREA 3
CONNECT TO J5
F5 10A 250V
1 FILTERS + POLLING 1-SPEED 1-SPEED NONE X-P2151 (PN 59233) °C
2 NONE 2-SPEED 1-SPEED NONE X-P2151 (PN 59233) °C
3 FILTERS + POLLING 1-SPEED NONE 1-SPEED X-B (PN 59231) °C
4 NONE 2-SPEED NONE 1-SPEED X-B (PN 59231) °C
5 FILTERS + POLLING 1-SPEED NONE NONE NONE °C
6 NONE 2-SPEED NONE NONE NONE °C
7 FILTERS + POLLING NONE NONE NONE NONE °C
SETUP # CIRC PUMP PUMP 1 PUMP 2 BLOWER USER-INSTALLED EXPANDER TEMP SCALE
INSTEAD OF SETUP
#5, THIS SYSTEM
IS CONFIGURED
IN SETUP #:
TORQUE RANGE
FOR TB1:
27-30IN.LBS.
F4 1A SLO-BLOW
F5 1A SLO-BLOW
F3 0.1A SLO-BLOW
TB1
1
2
3
K5 K1
K2 K4K3
F6 30A 250VAC
T1
J16
J17
J23
SERIAL
J5
REMOTE
RELAY
BOARD
J28 AUX FRZ
J35 MAINJ34 MAIN
K7
K12
120V 120V
240V
J24
J9
PUMP 1
J19
CIRC
J21
OZONE
J33
A/V
1
2
J4
J8
J18
J55
J3
J6
J51
J1
J27
J110
J13
HEATER 1
J2
J7
3
J20
J10 J12 J88
J22
ON
S1
J31 J30
J109
J15
LIGHT
J52
J46
J38
J11
HEATER 2
TP (MAIN) PANELS
J34 OR J35
10-10-19
BP200UX PN 59340-01
1
8
FOR SUPPLY CONNECTIONS,
USE CONDUCTORS SIZED ON THE
BASIS OF 60°C AMPACITY BUT
RATED MINIMUM OF 90°C.
USE COPPER CONDUCTORS ONLY.
EMPLOYER UNIQUEMENT
DES CONDUCTEURS DE CUIVRE.
#6 AWG MIN. WIRE= 90°
TOTAL OUTPUT AMP DRAW NOT TO
EXCEED MAX INPUT RATING OF SPA
USE EARTH GROUND CONNECTIONS
AS INDICATED INSIDE SYSTEM ENCLOSURE
WIFI
TRANSCEIVER
J34 OR J35
NOTE: SWITCH A7
SHOULD BE OFF IF
USING WIFI, SINCE
WIFI DOESN’T SUPPORT
SIMPLIFIED MENUS.
ALL UNUSED SWITCHES SHOULD BE OFF
8
7
6
5
4
3
2
1
OFF POSITION
S1 SWITCH #ON POSITION
*SWITCH # 6 SHOULD BE SET TO OFF UPON FINAL INSTALLATION.
NOTE: SWITCH A7 MUST BE OFF WHEN USING GRAPHIC
PANELS (TP800, TP900, OR SPATOUCH FAMILY).
3-PHASE SPCL AMP RULE OFF
STANDARD MENUS
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
1 MIN HTR COOLDOWN (ELEC)
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
3-PHASE SPCL AMP RULE ON
SIMPLIFIED MENUS
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
5 MIN HTR COOLDOWN (GAS)
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
EXPANDER BOARD MOUNTING HARDWARE
IS PRE-INSTALLED ON THIS MODEL.
NO EXPANDER BOARD IS USED
IN SEtUPS 5 - 7.
230V
1þ
1x32A
A2
A5
ON OFF
230V
1þ
1x16A

Template 56377 10-05-12 59340-91_59342-01_59310_59371_97_C 10-17-19
7
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2009 Balboa Water Group.
Wiring Diagram for Remote Heater Version
Hardware Setup
1
2
3
1
2
J4
J8
J18
J51
J1
J27
J10
3
J20
J10 J12 J88
J52
GRN
230V 2/3þ 2/3x16A
A2
A3
ON OFF
A5
BLU
BRN 1
BRN 2
A8
A2
A3
ON OFF
A5
A8
FOR PUMP2 OR BLOWER
ON HTR SERVICE (BRN 1):
J3 WIRE FROM EXPANDER
BOARD MUST BE
WIRED TO AREA 2
FOR PUMP2 OR BLOWER
ON PUMP1 SERVICE (BRN 2):
J3 WIRE FROM EXPANDER
BOARD MUST BE
WIRED TO J55
BRN LINE 3 LINE 3 - CAP (INSULATE) END.
DO NOT CONNECT
J55
230V
1þ
1x16A
1x32A
BRN
BLU
GRN
BRN BLU
BRN 2 BRN 1 BLU
1 SERVICE 1X16A 1X32A
2 OUT OF 3 SERVICE 2/3X16A
LOCATION DEVICE MAX AMPS
J9 NETZSTROMVERSORGUNG 1/2-GESCHW.-PUMPE 1 12A
ALIMENTATION POMPE 1 A 1/2 VITESSES 1/2-SPD PMP 1 MAX
J15 10V BELEUCHTUNG ECLAIRAGE BAIN HYDRO SPA LIGHT 1A (@10V)
J19 KREISLAUF PUMPE POMPE DE CIRCULATION CIRC PUMP 2A MAX
J21 OZONGENERATOR GENERATOROZONE OZONE GENERATOR 0.5A MAX
J33 TV / AV 2A MAX
J11 & J13 HEATER
SENSOR A
SENSOR B
REMOTE HEATER*
TORQUE RANGE FOR HEATER
CONNECTIONS: 30 TO 35
IN. LBS.
*REMOTE HEATER
SOLD SEPARATELY
EXPANDER
X-B2151
J3
PUMP 2 K1
J6
J2
W12 OPTIONAL EXPANDER X-P2151 PN 59233
LOCATION DEVICE VOLTS AMPS FROM TO FROM TO
J6 PUMP 2 230V 12A W12 AREA 3 J3 J55
CONNECT TO J55
CONNECT TO AREA 3
CONNECT TO J5
F5 15A 250V
EXPANDER X-B
J3
BLOWER K1
J6
J2
W12 OPTIONAL EXPANDER X-B PN 59231
LOCATION DEVICE VOLTS AMPS FROM TO FROM TO
J6 BLOWER 230V 4A W12 AREA 3 J3 J55
CONNECT TO J55
CONNECT TO AREA 3
CONNECT TO J5
F5 10A 250V
1 FILTERS + POLLING 1-SPEED 1-SPEED NONE X-P2151 (PN 59233) °C
2 NONE 2-SPEED 1-SPEED NONE X-P2151 (PN 59233) °C
3 FILTERS + POLLING 1-SPEED NONE 1-SPEED X-B (PN 59231) °C
4 NONE 2-SPEED NONE 1-SPEED X-B (PN 59231) °C
5 FILTERS + POLLING 1-SPEED NONE NONE NONE °C
6 NONE 2-SPEED NONE NONE NONE °C
7 FILTERS + POLLING NONE NONE NONE NONE °C
SETUP # CIRC PUMP PUMP 1 PUMP 2 BLOWER USER-INSTALLED EXPANDER TEMP SCALE
INSTEAD OF SETUP
#5, THIS SYSTEM
IS CONFIGURED
IN SETUP #:
TORQUE RANGE
FOR TB1:
27-30IN.LBS.
F4 1A SLO-BLOW
F5 1A SLO-BLOW
F3 0.1A SLO-BLOW
TB1
1
2
3
K5 K1
K2 K4K3
F6 30A 250VAC
T1
J16
J17
J23
SERIAL
J5
REMOTE
RELAY
BOARD
J28 AUX FRZ
J35 MAINJ34 MAIN
K7
K12
120V 120V
240V
J24
J9
PUMP 1
J19
CIRC
J21
OZONE
J33
A/V
1
2
J4
J8
J18
J55
J3
J6
J51
J1
J27
J110
J13
HEATER 1
J2
J7
3
J20
J10 J12 J88
J22
ON
S1
J31 J30
J109
J15
LIGHT
J52
J46
J38
J11
HEATER 2
TP (MAIN) PANELS
J34 OR J35
10-10-19
BP200UX PN 59310
1
8
FOR SUPPLY CONNECTIONS,
USE CONDUCTORS SIZED ON THE
BASIS OF 60°C AMPACITY BUT
RATED MINIMUM OF 90°C.
USE COPPER CONDUCTORS ONLY.
EMPLOYER UNIQUEMENT
DES CONDUCTEURS DE CUIVRE.
#6 AWG MIN. WIRE= 90°
TOTAL OUTPUT AMP DRAW NOT TO
EXCEED MAX INPUT RATING OF SPA
USE EARTH GROUND CONNECTIONS
AS INDICATED INSIDE SYSTEM ENCLOSURE
J31
2.0 kW
J31
J31 JUMPER MUST BE ON 1 PIN WITH 2.0 KW HEATER,
BUT ON 2 PINS WITH 3.0 KW HEATER.
3.0 kW
(AS MANUFACTURED)
WIFI
TRANSCEIVER
J34 OR J35
NOTE: SWITCH A7
SHOULD BE OFF IF
USING WIFI, SINCE
WIFI DOESN’T SUPPORT
SIMPLIFIED MENUS.
ALL UNUSED SWITCHES SHOULD BE OFF
8
7
6
5
4
3
2
1
OFF POSITION
S1 SWITCH #ON POSITION
*SWITCH # 6 SHOULD BE SET TO OFF UPON FINAL INSTALLATION.
NOTE: SWITCH A7 MUST BE OFF WHEN USING GRAPHIC
PANELS (TP800, TP900, OR SPATOUCH FAMILY).
3-PHASE SPCL AMP RULE OFF
STANDARD MENUS
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
1 MIN HTR COOLDOWN (ELEC)
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
3-PHASE SPCL AMP RULE ON
SIMPLIFIED MENUS
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
5 MIN HTR COOLDOWN (GAS)
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
EXPANDER BOARD MOUNTING HARDWARE
IS PRE-INSTALLED ON THIS MODEL.
NO EXPANDER BOARD IS USED
IN SEtUPS 5 - 7.
230V
1þ
1x32A
A2
A5
ON OFF
230V
1þ
1x16A

Template 56377 10-05-12 59340-91_59342-01_59310_59371_97_C 10-17-19
8
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2009 Balboa Water Group.
Setup Reference Table
1
2
3
1
2
J4 J8
J18
J51
J1
J27
J10
3
J20 J10 J12 J88
J52
GRN
230V 2/3þ 2/3x16A
A2
A3
ON OFF
A5
BLU
BRN 1
BRN 2
A8
A2
A3
ON OFF
A5
A8
FOR PUMP2 OR BLOWER
ON HTR SERVICE (BRN 1):
J3 WIRE FROM EXPANDER
BOARD MUST BE
WIRED TO AREA 2
FOR PUMP2 OR BLOWER
ON PUMP1 SERVICE (BRN 2):
J3 WIRE FROM EXPANDER
BOARD MUST BE
WIRED TO J55
BRN LINE 3 LINE 3 - CAP (INSULATE) END.
DO NOT CONNECT
J55
230V
1þ
1x16A
1x32A
BRN
BLU
GRN
BRN BLU
BRN 2 BRN 1 BLU
1 SERVICE 1X16A 1X32A
2 OUT OF 3 SERVICE 2/3X16A
LOCATION DEVICE MAX AMPS
J9 NETZSTROMVERSORGUNG 1/2-GESCHW.-PUMPE 1 12A
ALIMENTATION POMPE 1 A 1/2 VITESSES 1/2-SPD PMP 1 MAX
J15 10V BELEUCHTUNG ECLAIRAGE BAIN HYDRO SPA LIGHT 1A (@10V)
J19 KREISLAUF PUMPE POMPE DE CIRCULATION CIRC PUMP 2A MAX
J21 OZONGENERATOR GENERATOROZONE OZONE GENERATOR 0.5A MAX
J33 TV / AV 2A MAX
J11 & J13 HEATER 3.0 kW
SENSOR A
SENSOR B
3.0 kW HEATER
TORQUE RANGE FOR HEATER
CONNECTIONS: 30 TO 35
IN. LBS.
J3
PUMP 2 K1
J6
J2
W12 OPTIONAL EXPANDER X-P2151 PN 59233
LOCATION DEVICE VOLTS AMPS FROM TO FROM TO
J6 PUMP 2 230V 12A W12 AREA 3 J3 J55
CONNECT TO J55
CONNECT TO AREA 3
CONNECT TO J5
F5 15A 250V
EXPANDER
X-B2151
EXPANDER X-B
J3
BLOWER K1
J6
J2
W12 OPTIONAL EXPANDER X-B PN 59231
LOCATION DEVICE VOLTS AMPS FROM TO FROM TO
J6 BLOWER 230V 4A W12 AREA 3 J3 J55
CONNECT TO J55
CONNECT TO AREA 3
CONNECT TO J5
F5 10A 250V
1 FILTERS + POLLING 1-SPEED 1-SPEED NONE X-P2151 (PN 59233) °C
2 NONE 2-SPEED 1-SPEED NONE X-P2151 (PN 59233) °C
3 FILTERS + POLLING 1-SPEED NONE 1-SPEED X-B (PN 59231) °C
4 NONE 2-SPEED NONE 1-SPEED X-B (PN 59231) °C
5 FILTERS + POLLING 1-SPEED NONE NONE NONE °C
6 NONE 2-SPEED NONE NONE NONE °C
7 FILTERS + POLLING NONE NONE NONE NONE °C
SETUP # CIRC PUMP PUMP 1 PUMP 2 BLOWER USER-INSTALLED EXPANDER TEMP SCALE
INSTEAD OF SETUP
#5, THIS SYSTEM
IS CONFIGURED
IN SETUP #:
TORQUE RANGE
FOR TB1:
27-30IN.LBS.
F4 1A SLO-BLOW
F5 1A SLO-BLOW
F3 0.1A SLO-BLOW
TB1
1
2
3
K5 K1
K2 K4K3
F6 30A 250VAC
T1
J16
J17
J23
SERIAL
J5
REMOTE
RELAY
BOARD
J28 AUX FRZ
J35 MAINJ34 MAIN
K7
K12
120V 120V
240V
J24
J9
PUMP 1
J19
CIRC
J21
OZONE
J33
A/V
1
2
J4 J8
J18
J55
J3
J6
J51
J1
J27
J110
J13
HEATER 1
J2
J7
3
J20 J10 J12 J88
J22
ON
S1
J31 J30
J109
J15
LIGHT
J52
J46
J38
J11
HEATER 2
TP (MAIN) PANELS
J34 OR J35
10-10-19
BP200UX PN 59340-01
1
8
FOR SUPPLY CONNECTIONS,
USE CONDUCTORS SIZED ON THE
BASIS OF 60°C AMPACITY BUT
RATED MINIMUM OF 90°C.
USE COPPER CONDUCTORS ONLY.
EMPLOYER UNIQUEMENT
DES CONDUCTEURS DE CUIVRE.
#6 AWG MIN. WIRE= 90°
TOTAL OUTPUT AMP DRAW NOT TO
EXCEED MAX INPUT RATING OF SPA
USE EARTH GROUND CONNECTIONS
AS INDICATED INSIDE SYSTEM ENCLOSURE
WIFI
TRANSCEIVER
J34 OR J35
NOTE: SWITCH A7
SHOULD BE OFF IF
USING WIFI, SINCE
WIFI DOESN’T SUPPORT
SIMPLIFIED MENUS.
ALL UNUSED SWITCHES SHOULD BE OFF
8
7
6
5
4
3
2
1
OFF POSITIONS1 SWITCH #ON POSITION
*SWITCH # 6 SHOULD BE SET TO OFF UPON FINAL INSTALLATION.
NOTE: SWITCH A7 MUST BE OFF WHEN USING GRAPHIC
PANELS (TP800, TP900, OR SPATOUCH FAMILY).
3-PHASE SPCL AMP RULE OFF
STANDARD MENUS
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
1 MIN HTR COOLDOWN (ELEC)
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
3-PHASE SPCL AMP RULE ON
SIMPLIFIED MENUS
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
5 MIN HTR COOLDOWN (GAS)
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
EXPANDER BOARD MOUNTING HARDWARE
IS PRE-INSTALLED ON THIS MODEL.
NO EXPANDER BOARD IS USED
IN SEtUPS 5 - 7.
230V
1þ
1x32A
A2
A5
ON OFF
230V
1þ
1x16A
As shown on additional wiring diagram sections:
1
2
3
1
2
J4 J8
J18
J51
J1
J27
J10
3
J20 J10 J12 J88
J52
GRN
230V 2/3þ 2/3x16A
A2
A3
ON OFF
A5
BLU
BRN 1
BRN 2
A8
A2
A3
ON OFF
A5
A8
FOR PUMP2 OR BLOWER
ON HTR SERVICE (BRN 1):
J3 WIRE FROM EXPANDER
BOARD MUST BE
WIRED TO AREA 2
FOR PUMP2 OR BLOWER
ON PUMP1 SERVICE (BRN 2):
J3 WIRE FROM EXPANDER
BOARD MUST BE
WIRED TO J55
BRN LINE 3 LINE 3 - CAP (INSULATE) END.
DO NOT CONNECT
J55
230V
1þ
1x16A
1x32A
BRN
BLU
GRN
BRN BLU
BRN 2 BRN 1 BLU
1 SERVICE 1X16A 1X32A
2 OUT OF 3 SERVICE 2/3X16A
LOCATION DEVICE MAX AMPS
J9 NETZSTROMVERSORGUNG 1/2-GESCHW.-PUMPE 1 12A
ALIMENTATION POMPE 1 A 1/2 VITESSES 1/2-SPD PMP 1 MAX
J15 10V BELEUCHTUNG ECLAIRAGE BAIN HYDRO SPA LIGHT 1A (@10V)
J19 KREISLAUF PUMPE POMPE DE CIRCULATION CIRC PUMP 2A MAX
J21 OZONGENERATOR GENERATOROZONE OZONE GENERATOR 0.5A MAX
J33 TV / AV 2A MAX
J11 & J13 HEATER 3.0 kW
SENSOR A
SENSOR B
3.0 kW HEATER
TORQUE RANGE FOR HEATER
CONNECTIONS: 30 TO 35
IN. LBS.
J3
PUMP 2 K1
J6
J2
W12 OPTIONAL EXPANDER X-P2151 PN 59233
LOCATION DEVICE VOLTS AMPS FROM TO FROM TO
J6 PUMP 2 230V 12A W12 AREA 3 J3 J55
CONNECT TO J55
CONNECT TO AREA 3
CONNECT TO J5
F5 15A 250V
EXPANDER
X-B2151
EXPANDER X-B
J3
BLOWER K1
J6
J2
W12 OPTIONAL EXPANDER X-B PN 59231
LOCATION DEVICE VOLTS AMPS FROM TO FROM TO
J6 BLOWER 230V 4A W12 AREA 3 J3 J55
CONNECT TO J55
CONNECT TO AREA 3
CONNECT TO J5
F5 10A 250V
1 FILTERS + POLLING 1-SPEED 1-SPEED NONE X-P2151 (PN 59233) °C
2 NONE 2-SPEED 1-SPEED NONE X-P2151 (PN 59233) °C
3 FILTERS + POLLING 1-SPEED NONE 1-SPEED X-B (PN 59231) °C
4 NONE 2-SPEED NONE 1-SPEED X-B (PN 59231) °C
5 FILTERS + POLLING 1-SPEED NONE NONE NONE °C
6 NONE 2-SPEED NONE NONE NONE °C
7 FILTERS + POLLING NONE NONE NONE NONE °C
SETUP # CIRC PUMP PUMP 1 PUMP 2 BLOWER USER-INSTALLED EXPANDER TEMP SCALE
INSTEAD OF SETUP
#5, THIS SYSTEM
IS CONFIGURED
IN SETUP #:
TORQUE RANGE
FOR TB1:
27-30IN.LBS.
F4 1A SLO-BLOW
F5 1A SLO-BLOW
F3 0.1A SLO-BLOW
TB1
1
2
3
K5 K1
K2 K4K3
F6 30A 250VAC
T1
J16
J17
J23
SERIAL
J5
REMOTE
RELAY
BOARD
J28 AUX FRZ
J35 MAINJ34 MAIN
K7
K12
120V 120V
240V
J24
J9
PUMP 1
J19
CIRC
J21
OZONE
J33
A/V
1
2
J4 J8
J18
J55
J3
J6
J51
J1
J27
J110
J13
HEATER 1
J2
J7
3
J20 J10 J12 J88
J22
ON
S1
J31 J30
J109
J15
LIGHT
J52
J46
J38
J11
HEATER 2
TP (MAIN) PANELS
J34 OR J35
10-10-19
BP200UX PN 59340-01
1
8
FOR SUPPLY CONNECTIONS,
USE CONDUCTORS SIZED ON THE
BASIS OF 60°C AMPACITY BUT
RATED MINIMUM OF 90°C.
USE COPPER CONDUCTORS ONLY.
EMPLOYER UNIQUEMENT
DES CONDUCTEURS DE CUIVRE.
#6 AWG MIN. WIRE= 90°
TOTAL OUTPUT AMP DRAW NOT TO
EXCEED MAX INPUT RATING OF SPA
USE EARTH GROUND CONNECTIONS
AS INDICATED INSIDE SYSTEM ENCLOSURE
WIFI
TRANSCEIVER
J34 OR J35
NOTE: SWITCH A7
SHOULD BE OFF IF
USING WIFI, SINCE
WIFI DOESN’T SUPPORT
SIMPLIFIED MENUS.
ALL UNUSED SWITCHES SHOULD BE OFF
8
7
6
5
4
3
2
1
OFF POSITIONS1 SWITCH #ON POSITION
*SWITCH # 6 SHOULD BE SET TO OFF UPON FINAL INSTALLATION.
NOTE: SWITCH A7 MUST BE OFF WHEN USING GRAPHIC
PANELS (TP800, TP900, OR SPATOUCH FAMILY).
3-PHASE SPCL AMP RULE OFF
STANDARD MENUS
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
1 MIN HTR COOLDOWN (ELEC)
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
3-PHASE SPCL AMP RULE ON
SIMPLIFIED MENUS
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
5 MIN HTR COOLDOWN (GAS)
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
EXPANDER BOARD MOUNTING HARDWARE
IS PRE-INSTALLED ON THIS MODEL.
NO EXPANDER BOARD IS USED
IN SEtUPS 5 - 7.
230V
1þ
1x32A
A2
A5
ON OFF
230V
1þ
1x16A
Setup # Circ Pump Pump 1 Pump 2 Blower User-Installed Expander Temp Scale
1Programmable Filtration + Polling 1-Speed 1-Speed None X-P2151 (PN 59233) °C
2None 2-Speed 1-Speed None X-P2151 (PN 59233) °C
3Programmable Filtration + Polling 1-Speed None 1-Speed X-B (PN 59231) °C
4None 2-Speed None 1-Speed X-B (PN 59231) °C
5Programmable Filtration + Polling 1-Speed None None None °C
6None 2-Speed None None None °C
7Programmable Filtration + Polling None None None None °C
System (and any replacement board)
is shipped in Setup 5
Expander board mounting hardware
is pre-installed on this model.

Template 56377 10-05-12 59340-91_59342-01_59310_59371_97_C 10-17-19
9
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2009 Balboa Water Group.
Test Menu Access (S1, Switch 1 ON) Service Technician ONLY.
DANGER! HIGH VOLTAGE WILL BE ACCESSIBLE! SERVICE TECHNICIAN ONLY!
While the system is running, move DIP Switch 1 (on S1 on the Main circuit board) to ON.
The system will enter Test Mode.
Moving DIP Switch 1 to OFF will exit Test Mode.
To Change Software Setups:
While in Test Mode, press the indicated icons to move from screen to screen.
ON
1
10
S1
Changing Software Setups with spaTouch™ Icon-Driven Panels
Once on the Setup Selection screen, press the Up or
Down icon to select the desired Setup Number, then
press the Check Mark icon to confirm and to have
the spa restart.
After the system restarts, you may see a message
that “The settings have been reset”; this is normal
after changing Setups with DIP Switch 6 in the OFF
position. Press “Clear” to dismiss this message.
The example screens shown here are from the
spaTouch 1 Icon-Driven Panel, but the screens
on the spaTouch 2 Panel are similar. The main
difference is that the spaTouch 2 display is
wider.
ON
1 6
S1
As soon as Switch #1 is placed
in the ON position, the temperature will show
“T” after it instead of F or C, indicating the
System is in Test Mode

Template 56377 10-05-12 59340-91_59342-01_59310_59371_97_C 10-17-19
10
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2009 Balboa Water Group.
Test Menu Access (S1, Switch 1 ON) Service Technician ONLY.
DANGER! HIGH VOLTAGE WILL BE ACCESSIBLE! SERVICE TECHNICIAN ONLY!
While the system is running, move DIP Switch 1 (on S1 on the Main circuit board) to ON.
The system will enter Test Mode.
Moving DIP Switch 1 to OFF will exit Test Mode.
Software Setups
Under the TEST Menu, the Setup screen will allow changing the
Setup from 1 to any number established by the Manufacturer.
Changing the Setup may require wiring changes as well.
Changing Software Setups with TP800 / TP900 / spaTouch™ Menued Panel
Set: 104°F
8:32 PM
Ozone
Filter 1
Spa
Shortcuts
Settings
Test
High Range
102°F
Ready in Rest Mode
Heating

ON
1
10
S1
Test
Back
68.143%
Setup
A/B Temps
Fault Log
Timeouts
Temp Limit
1 
Off

Normal
Yes
Note: The Timeouts and Temp Limit
selections should NEVER be changed.
They are for safety agency testing
purposes only.

Template 56377 10-05-12 59340-91_59342-01_59310_59371_97_C 10-17-19
11
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2009 Balboa Water Group.
Test Menu Access (S1, Switch 1 ON) Service Technician ONLY.
DANGER! HIGH VOLTAGE WILL BE ACCESSIBLE! SERVICE TECHNICIAN ONLY!
While the system is running, move DIP Switch 1 (on S1 on the Main circuit board) to ON.
The system will enter Test Mode.
Moving DIP Switch 1 to OFF will exit Test Mode.
Software Setups
Under the TEST Menu, the Setup screen will allow changing the Setup from 1 to any number established by the Manufacturer.
Changing the Setup may require wiring changes as well.
You will have 1 minute to complete the setup change after you manually exit Priming Mode. (Once familiar with the process,
the Setup change should take less than 15 seconds.)
ON
1 6
S1
As soon as Switch #1 is placed
in the ON position, the temperature will show
“T” after it instead of F or C, indicating the
System is in Test Mode
When the panel displays RUN PMPS PURG AIR, press any Temperature button ONCE to exit Priming Mode.
You should see “---T” where the T indicates the system is in Test Mode.
Continued on Next Page.
READY RANGE
READY RANGE
or
Changing Software Setups with TP600 / TP500 / TP400

Template 56377 10-05-12 59340-91_59342-01_59310_59371_97_C 10-17-19
12
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2009 Balboa Water Group.
Changing Software Setups with TP600 / TP500 / TP400 Continued
Again, You will have 1 minute to complete the setup change after you manually exit Priming Mode.
NOTE: WHerever the below says Warm or Temp folowed by Light, on the TP500 press Menu instead of Warm or Temp followed by lighrt. And whenever the
chart below says Light, on the TP500 press Menu insead of Light.
Immediately after exiting Priming Mode, press this sequence of buttons: Warm*, Light, Warm, Warm, Warm, Warm. Continue to press Warm until the diplay
shows the Setup Number (S-01, S-02, etc.) you want to switch to. When the correct setup number is showing, press Light once, and the system will reset,
using the newly-selected Setup from that point on.
Move DIP Switch 1 to the OFF position to take the spa out of Test Mode. °F or °C will replace °T.
Using a permanent marker, write the Setup number on the Setup label mounted inside the system lid (right). This is very important to any service
person in the future who may need to replace a circuit board or system and needs to change the Setup on a replacement part while in the field.
NOTE: Changing the Setup may require wiring changes as well - refer to the wiring diagram or wiring diagram addendum.
THIS SYSTEM IS
CONFIGURED AS
SETUP #
Indicates Flashing or Changing Segment
Key
A temperature button, used for “Action”
Light or dedicated “Choose” button, depending on control panel configuration
Indicates Alternating or Progressive Message - every 1/2 second
Waiting time - varies depending on function
05/12/09
Main Menus with Test Mode (S1 ON) Details
SET SET
The System will reset and go into Priming Mode if the Light Button
is pressed while anything other than the current setup is flashing.
If there is no change to the Setup Number (S-01, S-02, etc.),
the display returns to the SETP screen.
Several Setups can
exist in in this string
A dash (--) indicates the current Setup.
SET
SET SET
SET SET
SET SET
While the Set Temperature is
still flashing, press Light
TEST will now appear in
the LCD first.
SET RANGE
Main Screen
READY RANGE FLTR1
Main Screen
READY RANGE FLTR1
SET
Approx.
5 sec.
or
Approx.
5 sec.
or
SET
SET
SET
SET
When set to ON, Panel will display
alternate readings from
Senor A and Sensor B
on Main Screen
Displays Fault Log
*If the Control Panel does not have a Warm (Up) button, but
rather a single Temp button, use the Temp button in place
of the Warm button in the instruction above. (The flow chart
assumes a single Temperature Button.)
Note: The Timeouts and Spa O/H
selections should NEVER be changed.
They are for safety agency testing
purposes only.

Template 56377 10-05-12 59340-91_59342-01_59310_59371_97_C 10-17-19
13
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2009 Balboa Water Group.
Expansion Features
Control Connection Default Fuse
Relay 1 (J5) in Setups 5 - 7 None (As Manufactured)
Relay 1 (J5) in Setups 1 & 2 1-Speed Pump 2 15A
Relay 1 (J5) in Setups 3 & 4 1-Speed Blower 10A
Equipment Expansion

Template 56377 10-05-12 59340-91_59342-01_59310_59371_97_C 10-17-19
14
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2009 Balboa Water Group.
Fixed-fuction DIP Switches
A1 Test Mode (normally Off).
A2 In “ON” position, add one high-speed pump (or blower) with Heater.
A3 In “ON” position, add two high-speed pumps (or 1 HS Pump and Blower) with Heater.
A5 In “ON” position, enables Special Amperage Rule B. See Special Features section under Configuration Options for functionality with your system.
In “OFF” position, enables Special Amperage Rule A.
A6 Persistent memory reset (Used when the spa is powering up to restore factory settings as determined by software configuration).
A2 and A3 work in combination to determine the number of high-speed devices and blowers that can run before the heat is disabled. i.e. A2 and A3 in the ON position will
allow the heater to operate with up to 3 high-speed pumps (or two HS Pumps and Blower) running at the same time. Heat is disabled when the fourth high-speed pump or
blower is turned on.
Note: A2/A3 all off = No heat with any high-speed pump or blower.
Assignable DIP Switches
A4 In “ON” position, enables a 5-minute cooldown for some gas heaters (Cooling Time B).
In “OFF” position, enables a 1-minute cooldown for electric heaters (Cooling Time A).
A7 In “ON” position, Simplified Menus on TP400/TP500/TP600. Do not use graphic panels (TP800, TP900, or spaTouch™ family) with Simplified Menus.
In “OFF” position, Regular Menus on TP400/TP500/TP600. This setting is compatible with all panels.
A8 In “ON” position, 3-Phase Special Amperage Rule is enabled.
In “OFF” position, 3-Phase Special Amperage Rule is disabled.
Undesignated switches are not assigned a function.
DIP Switch Functions
ON
1
8
S1

Template 56377 10-05-12 59340-91_59342-01_59310_59371_97_C 10-17-19
15
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2009 Balboa Water Group.
Jumper Definitions
J109 Non Applicable on CE models
J30 Do Not Use
J31 Jumper on 1 pin with 2.0kW or smaller heater
Jumper on 2 pins with a 3.0kW or higher heater
J44 Jumper must be on center two pins (240V) for CE Systems.
Warning!
Setting DIP switches or jumpers incorrectly may cause abnormal system behavior and/or damage to system components.
Refer to Switchbank illustration on Wiring Configuration page for correct settings for this system.
Contact Balboa if you require additional configuration pages added to this tech sheet.
J109
120V 120V
240V
J44
J31 for 3kW models
J31 for 2kW models
Jumper setting varies by system model
which is shown to the right of the jumper.

Template 56377 10-05-12 59340-91_59342-01_59310_59371_97_C 10-17-19
16
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2009 Balboa Water Group.
Replacement Parts
PCBA:
Main PCBA: 59341-01 3.0kW Models
59343-01 2.0kW Models + Remote Model
Expander PCBA: 59233 (X-P2151) for Pump2; 59231 (X-B) for Blower
HEATER(s):
Heater: 58419 3.0kW 800 Inc -- for integral heater only
58450 3.0kW 825 Inc -- for integral heater only
58427 2.0kW 800 Inc -- for integral heater only
Temp Sensor Kit: 30344KIT 12-inch sensor -- for integral heater only
30382KIT 24-inch sensor -- for integral heater only
CABLES: N/A
FUSES:
Part Number Amperage Location
30136 30A F6
26983 1A F4, F5 on main board
24514 0.1A SLO F3
24517 15A F5 on X-P2151 expander when using Pump 2 in Setup 1 or 2
30122 10A F5 on X-B expander when using Blower in Setup 3 or 4

Template 56377 10-05-12 59340-91_59342-01_59310_59371_97_C 10-17-19
17
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2009 Balboa Water Group.
BP200 Configuration Options
General Features
Feature Default
Pump 1 in Filter Cycle (Circ Only) No
Pump 1 Low Timer 30 Minutes Applies in non-circ Setups (configurations) only
General Pump Timer 15 Minutes
Blower Timer 15 Minutes
Mister Timer 15 Minutes
Light Timer 240 Minutes
Circ (when enabled) Programmable + Polling
Circ Pump can be set with the following functions:
24 hr – 24 hr w/3° shutoff – Acts like P1 Low (filters, polls, etc. - Requires a single-speed P1)
Cleanup Cycle 30 Minutes Between 30 and 240 minutes 30 Minutes
- or OFF
Cleanup as Preference setting Yes Yes, No N/A
Ozone With Heater Pump* Always, Filters/Cleanup Only N/A
Ozone Suppression OFF Between 30 and 120 min. 1 Minute
- or OFF
Pump Purge 60 Seconds Between 30 and 600 seconds 5 Seconds
Blower Purge 30 Seconds Between 5 and 300 seconds 5 Seconds
Mister Purge 5 Seconds
Purge Type Serial - Pumps at lowest speed
* The heater Pump can be either a Circ Pump or Pump 1 Low.

Template 56377 10-05-12 59340-91_59342-01_59310_59371_97_C 10-17-19
18
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2009 Balboa Water Group.
BP200 Configuration Options
Temperature Features
Feature Default Options Increment
Temperature Display °C °C, °F
All temperatures must be specified in °F. The system converts °F to °C dynamically. If Celsius is required for default settings, choose a desired °C value that (after rounding) cor-
responds to a Fahrenheit value.
°C 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
°F 39 41 43 45 46 48 50 52 54 55 57 59 61 63 64 66 68 70 72
°C 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
°F 73 75 77 79 81 82 84 86 88 90 91 93 95 97 99 100 102 104
Hi-Range Min. Set Temp 80°F Between 50 and 80°F 1°F
Hi-Range Max. Set Temp 104°F Between 60 and 104°F 1°F
Hi-Range Default Temp* 100°F Between 50 and 104°F 1°F
Lo-Range Min. Set Temp 50°F Between 50 and 80°F 1°F
Lo-Range Max. Set Temp 99°F Between 60 and 99°F 1°F
Lo-Range Default Temp* 70°F Between 50 and 99°F 1°F
Freeze Threshold 44°F in Setups 1 & 2
Freeze Type Rotating - Pumps at Lowest Speed
Temp Lock Type Temp + Settings
*May be changed by end-user (if enabled)

Template 56377 10-05-12 59340-91_59342-01_59310_59371_97_C 10-17-19
19
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2009 Balboa Water Group.
BP200 Configuration Options
Time Features
Feature Default Options Increment
Time Format* 24 Hour 12 Hour, 24 Hour N/A
Filter 1 Start Hour* 20:00 (8:00 PM) 00:00 to 23:00 1 Hour
Filter 1 Duration* 2 Hours Between 15 Min and 23:45 15 Minutes
-or continuous
Filter Cycle 2 Default* OFF OFF, ON N/A
Filter 2 Start Hour* 08:00 (8:00 AM) 00:00 to 23:00 1 Hour
Filter 2 Duration* 15 Minutes Between 15 Min and 23:45 15 Minutes
-or Continuous, or Disabled
Light Cycle Disabled Disabled, Enabled N/A
Light Cycle Default* OFF OFF, ON N/A
Light Cycle Start Hour* 21:00 (9:00 PM) 00:00 to 23:00 1 Hour
Light Cycle Duration* 15 Minutes Between 15 Min and 04:00 15 Minutes
-or or Disabled
Cooling Time A 1 Minute
Cooling Time B 5 Minutes
*May be changed by end-user (if enabled)

Template 56377 10-05-12 59340-91_59342-01_59310_59371_97_C 10-17-19
20
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2009 Balboa Water Group.
BP200 Configuration Options
Reminder Features
Feature Default Options Increment
Reminders Shown* Yes Yes, No N/A
Check pH OFF See Reminder Period Note 1 Days
Check Sanitizer OFF See Reminder Period Note 1 Days
Clean Filter 30 Days See Reminder Period Note 1 Days
Test GFCI OFF See Reminder Period Note 1 Days
Drain Water 100 Days See Reminder Period Note 1 Days
Change Cartridge OFF See Reminder Period Note 1 Days
Clean Cover OFF See Reminder Period Note 1 Days
Treat Wood OFF See Reminder Period Note 1 Days
Change Filter 365 Days See Reminder Period Note 1 Days
Reminder Periods can be set between 7 and 180 days. In addition, 365 days can be chosen.
Each reminder can be turned OFF individually.
*May be changed by end-user (if enabled)