Balboa Dolphin II CE User manual

Balboa Dolphin®II
Water Resistant Remote Control
CE Version
P/N 40763 Rev. B 12/18/2007

2
TABLE OF CONTENTS
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . .3
Features And Functions . . . . . . . . . . . . . . . 4-6
Installing Batteries . . . . . . . . . . . . . . . . . . . . .7
Programming TV Control . . . . . . . . . . . . . . . .8
Setup Codes for TVs . . . . . . . . . . . . . . . . . . . .8
Programming VCR Control . . . . . . . . . . . . . .12
Setup Codes for VCRs . . . . . . . . . . . . . . . . . .12
Programming Cable Converter
(or Satellite Receiver) Control .. . . . . . .15
Setup Codes for Cable Converters . . . . . . . . .16
Setup Codes for Satellite Receivers . . . . . . . .16
Programming DVD Control. . . . . . . . . . . . . .17
Setup Codes for DVD Players . . . . . . . . . . . .18
Programming CD Control . . . . . . . . . . . . . . .20
Setup Codes for CD Players . . . . . . . . . . . . .20
Programming Audio Control. . . . . . . . . . . . .22
Setup Codes for Stereo Receivers . . . . . . . . .22
Setup Codes for Stereo Amplifiers. . . . . . . . .24
Setup Codes for Automotive and Marine . . . . .24
Searching For Your Code . . . . . . . . . . . . . . .25
Checking The Codes. . . . . . . . . . . . . . . . . . .26
Reassigning Device Keys . . . . . . . . . . . . . . . .27
Setting Volume Lock. . . . . . . . . . . . . . . . . . .28
To Change Volume Lock to the CBL/SAT Mode 28
To Change Volume Lock to the TV Mode. . . .28
To Change Volume Lock to the VCR Mode. . .28
To Change Volume Lock to the DVD Mode . .28
To Change Volume Lock to the CD Mode . . .29
To Change Volume Lock to the RCVR Mode. .29
Clearing Volume Lock . . . . . . . . . . . . . . . . .29
Clearing Volume Lock For One Device . . . . .29
Using the Learning Feature. . . . . . . . . . . . . .30
Feature Reset . . . . . . . . . . . . . . . . . . . . . . . .31
Specifications. . . . . . . . . . . . . . . . . . . . . . . .32
Troubleshooting. . . . . . . . . . . . . . . . . . . . . .32

3
INTRODUCTION
The Dolphin®II CE Remote is Balboa’s latest
generation remote control. It is designed with
sophisticated technology that will allow you to
consolidate many of your existing remote controls
along with the entertainment system in your spa.
It’s packed with easy-to-use features such as:
s0REPROGRAMMEDTOOPERATETHECABLECONVERTER
supplied by your cable system provider
s0REPROGRAMMEDTECHNOLOGYFOREASYSETUP
s#OLORCODEDKEYSTOQUICKLYLOCATE
popular functions
s#ODELIBRARYFORVIDEOANDAUDIOCOMPONENTS
s#ODE3EARCHTOHELPPROGRAMCONTROLOF
older components
s,EARNINGFUNCTIONTOALLOWPROGRAMMINGWITH
another infrared (IR) remote
Before you can use your new remote control, you
will need to program it to operate the specific
home entertainment components you wish to
control. Follow the instructions detailed in this
manual to set up your Dolphin Remote and enjoy
your new remote control.
IMPORTANT! PLEASE READ:
7HENYOUAREREQUIREDTOENTERANADDRESSINTO
the spa, please write down the address you have
selected for future reference. Address may need to
be re-entered after servicing
Remote should be stored outside of spa when
not in use. Do not store in direct sunlight.

4
FEATURES AND FUNCTIONS
Use the illustration below to locate the Dolphin®II
Remote features and study the key locations
(on these two pages) to learn how they function.

5
Press POWER once to turn on or off the selected
home entertainment component.
The LED (red light) blinks to show that the remote
control is working and is sending signals.
5SE3%450FORALLPROGRAMMINGSEQUENCES
Press TV, VCR/DVD, CBL/SAT, RCVR, SPA, or CD
once to select a home entertainment component
to control.
See next page for descriptions of the buttons in
this circular area of the remote.
Use volume + (or volume -) to raise (or lower)
the sound volume.
Use CH + (or CH -) to select the next higher (or
lower) channel.
Press MUTE once to turn sound off or on.
Use these buttons to control available spa functions.
(Depending on your spa, some buttons may
control other equipment than indicated here.)
Use the keypad (0 ~ 9) to directly select channels
(e.g., 09 or 31).
Press MODE, then buttons RCVR or CD mode to
control input to Receiver or CD player.
Enter the 4 digit device code for the compatible
RCVR or CD model. Press ENTER.
In the VCR and TV modes, use the REW, PLAY, FF,
REC, STOP, and PAUSE keys to control your VCR.
To record a program, press REC twice. These keys
are also used for CD and DVD functions.
Continued on next page…

Use GUIDE to display the program guide.
Use EXIT to exit out of an on-screen menu
and guide.
Use the four directional keys to move the cursor in
the program guide and menu screens.
Use SELECT to choose options, PPV events, and to
tune programs from the program guide.
Use INFO to display current channel and program
information.
Press MENU once to display an on-screen menu.
FEATURES AND FUNCTIONS
…Continued
6

7
BATTERIES
Whenever batteries need to be replaced, the
Dolphin will blink twice with every key press.
Simply replace the batteries. The Dolphin retains
your favorite settings.
INSTALLING BATTERIES
1. On the back of the Dolphin Remote, remove
the screws that hold the battery cover in place
and lift off the battery cover.
2 Obtain two (2) fully-charged AA
alkaline batteries.
Match the + and – marks on the batteries to
the + and – marks in the battery case, then
insert the new batteries.
3. Press the battery cover back into place, being
careful to align it with the rubber seal.
4. Replace the screws that hold the battery cover
by carefully starting each one without tightening
it. Once they are all started, snug up one
screw and then do the same to the screw on
the opposite side of the door. Repeat this in a
crossing pattern until all screws are snug.
Do not overtighten them. This will assure an
ADEQUATEWATERSEALAROUNDTHEBATTERYCOVER
5. Test the unit by pressing any mode key (e.g.,
TV, VCR/DVD, CBL/SAT, RCVR, SPA, or CD).
If the batteries are inserted correctly, the LED
will blink once.

8
PROGRAMMING TV CONTROL
Locate the brand name of your TV in the Setup
Codes For TVs section below, and write it in the
following space.
TV Brand:
The brands are listed in alphabetical order with
the most popular codes listed first. You will use
one of these codes to program the Dolphin to
operate your TV:
1. Turn on the TV.
2. On the Dolphin, press TV once. Press and
hold SETUP until the LED blinks twice, then
release SETUP.
3. Enter the first four-digit code for your TV. If you
perform this procedure correctly, the LED will
blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, repeat steps 2 through 3 and
try entering the same code again.
4. Aim the Dolphin at your TV and press POWER
once. The TV should turn off. If it does not
respond, repeat steps 2-4, trying each code for
your brand until you find one that works. If it
still does not work, try searching for the code
(see Searching For Your Code on page 25).
5. Write your TV code in the boxes below for
future reference.
■ ■ ■ ■
NOTE: Remember, to use the Dolphin to operate
your TV, press TV first.
Setup Codes for TVs:
Admiral 0463, 0093
Advent 0761, 0842
Aiko 0092
Akai 0702, 0672, 0030, 0812
Albatron 0700
Alfide 0672
America Action 0180
Anam 0180
AOC 0030
Apex Digital 0748, 0765, 0879, 0767
Audinac 0180
Audiovox 0451, 0180, 0092, 0623
Aurora Systems 0801
Baysonic 0180
Bell & Howell 0154
Blaupunkt 0763
Blue Sky 1254
Bradford 0180
Broksonic 0463, 0236
Candle 0030
Carnivale 0030
Carver 0054
Casio 1205
CCD TV 0463

9
Celebrity 0000
Celera 0765
Changhong 0765
Cineral 0451, 0092
Citizen 0060, 0030, 0092
Clarion 0180
Concept 0763
Contec 0180
Craig 0180
Crosley 0054
Crown 0180, 0672
Crown Mustang 0672
Curtis Mathes 0047, 0054, 0154, 0451, 0093,
0060, 0702, 0030, 0145, 0166,
1147, 1347
CXC 0180
Daewoo 0451, 1661, 0672, 0092, 0623
Denon 0511, 0145
Dumont 0017
Durabrand 0463, 0180, 0178, 0171
Electroband 0000
Elektra 0017, 1661
Emerson 0154, 0463, 0180, 0236, 0178,
0171, 0623
Envision 0030
Farenheit 1598
Fisher 0154
Fujitsu 0683, 0809
Funai 0180, 0171
Futuretech 0180
Gateway 1755, 1756
GE 0047, 0051, 0451, 0178, 1147,
1347, 1447
Gibralter 0017, 0030
GoldStar 0030, 0178
Goodmans 0360
Gradiente 0053
Grundig 0672
Grunpy 0180
Hallmark 0178
Harman/Kardon 0054
Harvard 0180
Havermy 0093
Hello Kitty 0451
Himitsu 0180
Hisense 0748
Hitachi 0145, 1145
Infinity 0054
Initial 1990
)NTEQ 
IRT 0451, 1661
JBL 0054
JCB 0000
Jensen 0761, 1299
JVC 0463, 0053, 1253, 0731
KEC 0180
Kenwood 0030
Kioto 0054, 0706
KLH 0765, 0767
Kost 1262, 1483
KTV 0180, 0030, 1593
LG 0030, 0178
Loewe 0136
LXI 0047, 0054, 0154, 0156, 0178
M & S 0054
Magnavox 0054, 0706, 0030, 1454, 1254
Marantz 0054, 0030
Matsushita 0250, 0650

10
Megapower 0700
Megatron 0178, 0145
Memorex 0154, 0463, 0150, 0178
MGA 0150, 0030, 0178
Micro Model 1436
Midland 0047, 0017, 0051
Misc 1530
Mitsubishi 0093, 0150, 1250, 0178, 0836
Monivision 0700
Motorola 0093
MTC 0060, 0030
Multitech 0180
NAD 0156, 0178, 0866
NEC 0030, 1704
Nesa 0763
Nikko 0030, 0178, 0092
Noblex 0154
Norcent 0748
NTC 0092
Onwa 0180
Optimus 0154, 0250, 0166, 0650
Optonica 0093
Orion 0463, 0236
Panasonic 0051, 0250, 0650
Penney 0047, 0156, 0051, 0060, 0030,
0178, 1347
Philco 0054, 0463, 1661, 0030, 0145
Philips 0054, 1454, 0690
Pilot 0030
Pioneer 0166, 0866, 0679, 1398
Portland 0092
Prima 0761
Princeton 0700
Prism 0051
Proscan 0047, 1347, 1447
Proton 0178
Pulsar 0017
Quasar 0051, 0250, 0650
RadioShack 0047, 0154, 0180, 0030, 0178
RCA 0047, 0060, 1047, 1147, 1247,
1347, 1447,1547, 0679
Realistic 0154, 0180, 0030, 0178
Runco 0017, 0030
Sampo 0030, 1755
Samsung 0060, 0702, 0030, 0178, 1060,
0812, 0814, 1575, 1312
Sansei 0451
Sansui 0463
Sanyo 0088, 0154
Scotch 0178
Scott 0180, 0236, 0178
Sears 0047, 0054, 0154, 0156, 0178,
0171
Semivox 0180
Semp 0156, 1356
Sharp 0093, 0818, 1393
Sheng Chia 0093
Signet 0800, 0844, 1262
Sony 0000, 1100
Soundesign 0180, 0178
3QUAREVIEW 
SSS 0180
Starlite 0180
Sunbrite 1435, 1420
Supreme 0000
SVA 0748, 0865
Sylvania 0054, 0030, 0171

11
Symphonic 0180, 0171
Tandy 0093
Tatung 1756
Technics 0051, 0250
Techwood 0051
Teknika 0054, 0180, 0150, 0060, 0092
Telefunken 0702
TMK 0178
TNC 0017
Tophouse 0180
Toshiba 0154, 0156, 0093, 0060, 1156,
1356, 1656, 1704, 0650, 1256
TVS 0463
V Inc. 1756
Vector Research 0030
Victor 0053
Vidikron 0054
Vidtech 0178
Viewsonic 1755
Wards 0054, 0030, 0178, 1156, 0866
Waycon 0156
White Westinghouse 0463, 0623, 1577
Yamaha 0030
Zenith 0017, 0463, 0178, 0092

12
PROGRAMMING
VCR CONTROL
Locate the brand name of your VCR in the Setup
Codes For VCRs section below, and write it in the
following space.
VCR Brand:
The brands are listed in alphabetical order with
the most popular codes listed first. You will use
one of these codes to program the Dolphin to
operate your VCR:
1. Turn on your VCR and insert a video cassette.
2. On the Dolphin, press VCR once. Press and
hold SETUP until the LED blinks twice, then
release SETUP.
3. Enter the first four-digit code for your VCR. If
you perform this procedure correctly, the LED
will blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, repeat steps 2 through 3 and
try entering the same code again.
4. Aim the Dolphin at your VCR and press POWER
once. The VCR should turn off. If your VCR
remote control does not have a POWER key,
press PLAY. If the VCR does not respond, repeat
steps 2-4, trying each code listed for your
brand until you find one that works. If the VCR
still does not work, try searching for the code
(see Searching For Your Code on page 25).
5. Write your VCR code in the boxes below for
future reference.
■ ■ ■ ■
NOTE: Remember to use the Dolphin to operate
your VCR, press VCR first.
Setup Codes for VCRs:
ABS 1972
Admiral 0048, 0209
Adventura 0000
Aiwa 0124, 0000, 0037
Akai 0175
Alienware 1972
American High 0035
Asha 0240
Audiovox 0037
Beaumark 0240
Bell & Howell 0104

13
Broksonic 1479, 0184, 0121, 0209, 0002
Calix 0037
Canon 0035
Carver 0081
CCE 0072
Citizen 1278, 0037
Clarion 0889, 0888
Colt 0072
Craig 0037, 0047, 0240, 0072
Curtis Mathes 1035, 0035, 0060, 0162
CyberPower 1972
Cybernex 0240
Daewoo 1278, 0045
Dell 1972
Denon 0042
DirecTV 0739
Durabrand 0039
Dynatech 0000
Electrohome 0037
Electrophonic 0037
Emerex 0032
Emerson 1479, 1278, 0000, 0037, 0184,
0121, 0043, 0209, 0002
Fisher 0047, 0104
Fuji 0035, 0033
Funai 0000
Garrard 0000
Gateway 1972
GE 1035, 1060, 0807, 0035, 0060,
0240
Goldstar 1237, 0037
Gradiente 0000
Harley Davidson 0000
Harman/Kardon 0081
Harwood 0072
Hewlett Packard 1972
Hitachi 0000, 0042
HI-Q 0047
Howard Computer 1972
HP 1972
Hughes Network Systems 0739, 0042
IBUYPOWER 1972
Jenson 0889
JVC 0067
KEC 0037
Kenwood 0067
KLH 0072
Kodak 0035, 0037
LG 0037
Lloyd’s 0000
Logik 0072
LXI 0037
Magnasonic 1278
Magnavox 1781, 0000, 0035, 0039, 0081
Magnin 0240
Marantz 0035, 0081
Marta 0037
Matsushita 0035, 0162
Media Center PC 1972
MEI 0035
Memorex 1237, 0000, 0035, 0037, 0048,
0039, 0047, 0162, 0240, 0104,
0209
MGA 0240, 0043
MGN Technology 0240
Microsoft 1972
Mind 1972

14
Minolta 0042
Mitsubishi 0807, 0067, 0043
Motorola 0035, 0048
MTC 0000, 0240
Multitech 0000, 0072
NEC 0067, 0104
Nikko 0037
Noblex 0240
Northgate 1972
Olympus 0035
Onkyo 0222
Optimus 0037, 1062, 0048, 0162, 0104
Orion 1479, 0184, 0209, 0002
Panasonic 0225, 1035, 0616, 0035, 1062,
0162
Penney 1237, 1035, 0035, 0037, 0042,
0240
Pentax 0042
Philco 0035, 0209
Philips 0618, 0739, 0035, 0081
Pilot 0037
Pioneer 0067
Polk Audio 0081
Profitronic 0240
Proscan 1060, 0060
Protec 0072
Pulsar 0039
Quasar 1035, 0035, 0162
RadioShack 0000
Radix 0037
Randex 0037
RCA 1035, 1060, 0807, 0880, 0060,
0042, 0240, 0060
Realistic 0000, 0035, 0037, 0048, 0047,
0104
ReplayTV 0614, 0616
Runco 0039
Samsung 1014, 0045, 0240
Sanky 0048, 0039
Sansui 1479, 0000, 0067, 0209
Sanyo 0159, 0047, 0240, 0104
Scott 0184, 0045, 0121, 0043
Sears 1237, 0000, 0035, 0037, 0047,
0042, 0104
Semp 0045
Sharp 0807, 0048
Shintom 0072
Shogun 0240
Singer 0072
Sonic Blue 0614, 0616
Sony 1232, 0000, 0636, 1972, 0032,
0035, 0033
STS 0042
Sylvania 1781, 0000, 0035, 0081, 0043
Symphonic 0000
Systemax 1972
Tagar Systems 1972
Teac 0000
Technics 0035, 0162
Teknika 0000, 0035, 0037
Thomas 0000
Tivo 0618, 0636, 0739, 1503
TMK 0240
Toshiba 0845, 1145, 1503, 1008, 1972,
0045, 0043
Totevision 0037, 0240
Touch 1972

15
Unitech 0240
Vector 0045
Video Concepts 0045
Videomagic 0037
Videosonic 0240
Viewsonic 1972
Villain 0000
Wards 0000, 0035, 0060, 0048, 0047,
0081, 0042, 0240, 0072
White Westinghouse 0209, 0072
XR-1000 0000, 0035, 0072, 0035
Zenith 1479, 0000, 0039, 0033, 0209
ZT Group 1972
PROGRAMMING CABLE
CONVERTER (OR SATELLITE
RECEIVER) CONTROL
Locate the brand name of your Cable Converter (or
Satellite Receiver) in the Setup Codes For Cable
Converters (or Setup Codes For Satellite Receivers)
section starting on the next page, and write it in the
appropriate space.
Cable Converter Brand:
or
Satellite Receiver Brand:
The brands are listed in alphabetical order
with the most popular codes listed first. You
will use one of these codes to reprogram the
Dolphin to operate your Cable Converter or
Satellite Receiver.
1. Turn on the Cable Converter or the
Satellite Receiver.
2. On the Dolphin, press CBL/SAT once. Press and
hold SETUP until the LED blinks twice, then
release SETUP.
3. Enter the first four-digit code for your
Cable Converter or Satellite Receiver. If you
perform this procedure correctly, the LED will
blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, repeat steps 2-3 and try
entering the same code again.
4. Aim the Dolphin at your Cable Converter or
Satellite Receiver and press POWER once. The
unit should turn off. If it does not respond,
repeat steps 2-4, trying each code listed for
your brand until you find one that works. If it
still does not work, try searching for the code
(see Searching For Your Code on page 25).
5. Write your Cable Converter or Satellite Receiver
code in the boxes below for future reference.
■ ■ ■ ■
NOTE: Remember to use the Dolphin to operate
your Cable Converter or Satellite Receiver, press
CBL/SAT first.

16
Setup Codes for
Cable Converters:
ABC 0003, 0008
Americast 0899
Bell South 0899
Director 0476
General Instruments 0476, 0810, 0276, 0003
GoldStar 0144
Jerrold 0476, 0810, 0276, 0003
Memorex 0000
Motorola 0476, 1376, 0810, 0276
Pace 1877, 0237
Panasonic 0000
Paragon 0000
Philips 0305, 0317
Pioneer 0877, 1877, 0144, 0533
Pioneer 0533
Pulsar 0000
Quasar 0000
Runco 0000
Samsung 0144
Scientific Atlanta 0877, 1877, 0477, 0008
Starcom 0003
Supercable 0276
Torx 0003
Toshiba 0000
Zenith 0000, 0525, 0899
Setup Codes for
Satellite Receivers:
AlphaStar 0772
Century 0856
Chaparral 0216
DirecTV 0566, 0639, 1639, 1640,
0247, 0749, 1749, 1142,
1442, 0724, 0819, 1856,
0392, 1392, 1414, 1109,
1444, 1076, 0099
Dish Network System 0775, 1005, 1170
DishPro 0775, 1005
Echostar 0775, 1005, 1170
Expressvu 0775
GE 0566
General Instruments 0869
GOI 0775
Goodmans 1246
Gradiente 0856
Hitachi 0819
HTS 0775
Hughes Network Systems 0749, 1749, 1142, 1442,
1443, 1444
Innova 0099
JVC 0775, 1170
LG 1226, 1414
Magnavox 0724, 0722
Mega Sat 1551
Memorex 0724
Mitsubishi 0749
Motorola 0869
NEC 1270
Netsat 0099
Next Level 0869
Panasonic 0701, 0247

17
Paysat 0724
Philips 0749, 1749, 1142, 1442,
0724, 0722, 0856, 1076,
0099
Proscan 0566, 0392
RadioShack 0869
RCA 0566, 0143, 0855, 0392,
1392
SKY 0856, 1856, 0099
Samsung 1276, 1109
Sanyo 1219
Sony 0639, 1639, 1640
Star Choice 0869
Tivo 1142, 1442, 1443, 1444
Toshiba 0749, 1749, 0790, 1285
UltimateTV 1640, 1392
Uniden 0724, 0722
Voom 0869
Zenith 0856, 1856
PROGRAMMING DVD CONTROL
Locate the brand name of your DVD player in the
Setup Codes For DVD Players section below, and
write it in the following space.
DVD Player Brand:
The brands are listed in alphabetical order with
the most popular codes listed first. You will use
one of these codes to program the Dolphin to
operate your DVD Player:
1. Turn on the DVD Player.
2. On the Dolphin, press DVD once. Press and
hold SETUP until the LED blinks twice, then
release SETUP.
3. Enter the first four-digit code for your DVD
Player. If you perform this procedure correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, repeat steps 2 through 3 and
try entering the same code again.
4. Aim the Dolphin at your DVD Player and press
POWER once. The DVD Player should turn
off. If it does not respond, repeat steps 2-4,
trying each code for your brand until you find
one that works. If it still does not work, try
searching for the code (see Searching For Your
Code on page 25).
5. Write your DVD code in the boxes below for
future reference.
■ ■ ■ ■
NOTE: Remember, to use the Dolphin to operate
your DVD Player, press DVD first.

18
Setup Codes for DVD Players:
Allegro 0869
Anaba 0813
Apex Digital 0672, 1020, 0794, 0796,
0797, 1100, 1004, 0755,
1056, 1061, 0830, 0717
Aspire Digital 1168
Audiovox 1072
Axion 1072
Blaupunkt 0717
Blue Parade 0571
Boss 1680
Broksonic 0695
Cinevision 0876, 0869
Clarion 0891, 0892, 1039, 1559
Coby 1086
Concept 1564
Curtis Mathes 1087
CyberHome 0816, 1023, 1024, 1117, 1129
Daewoo 1172, 0784, 0869, 0833
Denon 0490
Dual 1068, 1085
DVD2000 0521
Emerson 0591, 0675
Enterprise 0591
Fahrenheit 0887, 0890, 1054, 1066, 1142
Fisher 0670
Funai 0675
Gateway 1158, 1073
GE 0522, 0815, 0717
Go Video 0783, 1099, 1730, 0869,
0833, 0715, 0744, 1075
GPX 0699
Gradiente 0651
Greenhill 0717
Harman/Kardon 0582, 0702
Hitachi 0573, 0664, 0695
Hiteker 0672
Honyas 1142
Initial 0717, 1472
IRT 0783
JBL 0702
Jensen 1016, 1700
JVC 0558, 0623, 0867, 1872
KEC 1238
Kenwood 0490, 0534
KLH 1020, 0717
Koss 0651
Lanzar 1398
Lasonic 0798
Lite-On 1058, 1158
Loewe 0511
Magnavox 0503, 0675
Marantz 0539
Memorex 0695
Microsoft 0522
Mintek 0839, 0717
Mitsubishi 0521, 1521
NEC 0785
Nesa 0717, 1603
Norcent 1003
Onkyo 0792, 0503
Optiview 0813
Oritron 0651
Panasonic 0490, 1762,
Philips 0503, 0539, 0646, 0854

19
Pioneer 0525, 0571
Polaroid 1086, 1061
Polk Audio 0539
Proscan 0522
Pyle 1300, 1746
Qwestar 0651
RCA 0522, 0571, 0822, 1132,
1022, 0717
Rio 0869
Rotel 0623
Rowa 0823
Sampo 0752
Samsung 0490, 0573, 0744, 0820, 1075
Sansui 0695
Sanyo 0670, 0873, 0695
Semp 0503
Sharp 0752, 0630
Sharper Image 1117
Sherwood 0770
Shinsonic 0533, 0839
Sonic Blue 1099, 0869
Sony 0533, 1033, 0864
Sound Mobile 1298
Starvision 1300
Superscan 0821
Sylvania 0675
Symphonic 0675
T-View 0813
Teac 0809
Technics 0490
Theta Digital 0571
Toshiba 0503, 1154, 0695
Tredex 0799
US Logic 0839
Urban Concepts 0503
Xbox 0522
Yamaha 0490, 0539, 0545
Zenith 0503, 0591, 0869

20
PROGRAMMING CD CONTROL
Locate the brand name of your CD Player in the
Setup Codes For CD Players section below, and
write it in the following space.
CD Player Brand:
The brands are listed in alphabetical order with
the most popular codes listed first. You will use
one of these codes to program the Dolphin to
operate your CD Player:
1. Turn on the CD Player.
2. On the Dolphin, press CD once. Press and
hold SETUP until the LED blinks twice, then
release SETUP.
3. Enter the first four-digit code for your CD
Player. If you perform this procedure correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, repeat steps 2 through
3 and try entering the same code again.
4. Aim the Dolphin at your CD Player and press
POWER once. The CD Player should turn off.
If it does not respond, repeat steps 2-4,
trying each code for your brand until you find
one that works. If it still does not work, try
searching for the code (see Searching For Your
Code on page 25).
5. Write your CD code in the boxes below for
future reference.
■ ■ ■ ■
NOTE: Remember, to use the Dolphin to operate
your CD Player, press CD first.
Setup Codes for CD Players:
Aiwa 0157
Burmester 0420
California Audio Labs 0029, 0303
Carver 0157, 0179, 0437
CCE 0157
Classic 1297
Denon 0003, 0873
DKK 0000
DMX Electronics 0157
Emerson 0305
Fisher 0179, 1325
Garrard 0420, 0393
Genexxa 0032, 0305
GPX 1296
Harman/Kardon 0157, 0173, 1202
Hitachi 0032
Integra 0101
JVC 0072, 1294
Kenwood 0826, 0626, 0028, 0037, 0190, 0681
KHL 1711
KLH 1318