Bang & Olufsen BEOSOUND 9000 User manual

BeoSound 9000
Guide

3
Your key to using BeoSound 9000
4Principles of operation
5Buttons on the operation panel
Using the CD player
6Loading CDs
7CD playback
7Playing tracks and CDs in random order
8Choosing discs to include in a sequence
Using the radio
9Switch on the radio
Adjust the volume
10 Adjust the sound volume
Contents of the Guide
To get to know your Bang & Olufsen product,
two guides are at your disposal.
The Guide provides information on daily use.
The Reference book gives a thorough overview
of all aspects.
To the right, you find the contents of this Guide.
The main chapters of the Reference book are listed
below:
• Before you start, 6
• How to set up BeoSound 9000, 7
• Connect the cables, 10
• Getting started, 12
• Set the time, 13
• Make BeoSound 9000 start or stop at a
specific time, 14
• Playing CDs , 18
• Playing CDs in different ways, 20
• Playing favourite CD tracks, 21
• Name your CDs, 22
• Positioning CDs, 23
• Display CD information, 24
• Playing other sources , 25
• Using the radio, 26
• Optimise radio sound, 27
• Name radio stations, 28
• Play your radio stations, 29
• Adjust and store sound settings, 30
• Using the Beo4 remote control, 31
• Use BeoSound 9000 with a video
system, 32
• Looking after BeoSound 9000, 34
• The PIN-code system, 36
Guide
BeoVisionAvant
Reference book
BeoVisionAvant
The Guide The Reference
book

4
Your BeoSound 9000 is designed for
both close-up operation via the
BeoSound 9000 operation panel and
remote control operation via Beo4.
Whether you place BeoSound 9000
on a table, vertically or horizontally
on the wall or on the specially
designed BeoSound 9000 stand, you
can adjust the position of the
operation panel in order to facilitate
your operation of the
BeoSound 9000.
Compact Disc player
The BeoSound 9000 contains 6 Compact Disc
compartments and a carriage moves between
compartments enabling CD playback. Move the
carriage by pressing the direct CD selection
button next to the CD compartment.
Your key to using BeoSound 9000
When you switch the BeoSound 9000 to
stand-by, the carriage will always situate
itself next to the operation panel and the CD
compartment number 1.
TREBLE RESET
BASS MUTE
BALANCE VOL
LOUDNESS VOL
OK
TIMER ON/OFF
CHECK CLOCK CLEAR
OK
RANDOM CD
EDIT PAUSE
SELECT EDITING
NAMING CLEAR
OK
TUNE RADIO
AM/FM
P. NO.
NAMING CLEAR
OK
A. AUX
•
NOTE! Please refer to the Reference Book for
instructions of how to remove and replace the
operation panel.
Load button
The load button is situated in a low position on
the BeoSound 9000.
Direct CD selection button
A selection button is situated next to all 6
Compact Disc compartments.
Press this button to play the CD in the
compartment.
•Stand-by button
Socket for headphones
BeoSound 9000 operation panel

5
Buttons on the operation panel
The buttons on the operation panel are
conveniently grouped according to type of
function, so you can easily find your way
around the panel while operating the system.
What’s on the display
The display keeps you informed about what
the BeoSound 9000 is doing and about
ongoing operations, e.g. playing a CD
sequence named GLENN MILLER. For details
in the operation of the display, see Switching
between displays in the Reference book.
Sound adjustments. The
buttons give access to sound
adjustment functions:
VOL rand VOL u: Raise and
lower the volume level.
MUTE: Mutes or activates the
loudspeakers.
TREBLE, BASS, BALANCE and
LOUDNESS: Regulate the
sound from the loudspeakers.
RESET: Resets the settings for
sound to their default
settings.
Timer functions. The buttons
give access to timer functions:
TIMER: Sets Timers for when
the BeoSound 9000 should
begin to play or switch off.
ON/OFF: On or off decides
where a timer will be heard or
executed.
CHECK: Checks your Timers.
CLEAR: Clears your Timers.
CLOCK: Sets or displays the
built-in clock.
CD functions. The buttons give
access to the CD functions:
CD: Plays the CD.
PAUSE: Pauses playback.
SELECT and EDITING:
Programming sequences of
discs and tracks.
RANDOM and EDIT: Operate
special random and edited
play functions for the CDs.
NAMING: Names discs and
sequences.
CLEAR: Clears programmed
values.
Radio functions. The buttons give access to
the radio functions:
RADIO: Plays the radio.
TUNE, AM/FM and P. NO.: Tune in to stations
and number them.
NAMING: Names stations.
CLEAR: Clears stations.
A. AUX function. The button enables you to
switch on extra audio equipment.
Stand-by function. The button switches
BeoSound 9000 to stand by.
If PIN appears in the display the first time you
activate a function, and you have not
received a PIN-code from your Bang &
Olufsen retailer, contact your retailer to
receive a PIN-code. For further information
about the PIN-code function, refer to the
chapter The PIN-code system on page 36 in
the Reference book.
TREBLE RESET
BASS MUTE
BALANCE VOL
LOUDNESS VOL
OK
TIMER ON/OFF
CHECK
CLOCK CLEAR
OK
RANDOM CD
EDIT PAUSE
SELECT EDITING
NAMING CLEAR
OK
TUNE RADIO
AM/FM
P. NO.
NAMING CLEAR
OK
A. AUX

6
When you have loaded your
BeoSound 9000 with 1–6 CDs, you
are ready to start playing your CDs.
When you press the CD button to
start playing, all information about
the CDs will be registered, e.g. the
number of tracks. All loaded CDs are
then played.
You can change between the different
CDs and the individual tracks, to
achieve the sequence of tracks you
prefer. You can also play CDs and
tracks on individual CDs in a random
order, using the random function.
After 12 hours of uninterrupted
playing, the BeoSound 9000 stops.
If you choose to listen to another
source, the CD player switches off
automatically.
Using the CD player
Loading CDs
Pressing the load button raises the glass door.
You can load the CDs you want to play or
remove the CDs from their compartments.
Press to raise the glass
door
Press to lower the glass
door, or…
…press to lower the
door and start playing
If the carriage is situated over the CD
compartment where you want to load a new CD,
simply press the direct selection button in front of
another CD compartment to make the carriage
move.
CD
The CD must be loaded with the text side facing
you. Hold the CD by its edges and insert the CD
(top section). To unload the CD, hold it by its
edges and push the CD slightly forward to
release it.

7
CD playback
Start playback of a CD by pressing the OK
button in the CD section of buttons. If you
want to play a specific CD, simply press the
direct CD selection button* placed next to
the CD compartment.
Press to play a CD
Press to play the next
track
Press to play the same
track again or press
twice to play the
previous track
Press to pause playback
Press to resume playing
Press to silence the
speakers. Press again to
recall the sound
Press to switch to
stand-by
*The CD selection buttons can be also be used to
step through the tracks of your CDs. Press the
button once – and you select the CD, press it
continuosly – and you step through the tracks of
the chosen CD.
Press to start playing CD
Press to display
RANDOM ON and cut
in the random play
function
Press twice to display
RANDOM OFF and
cancel the random play
function
If you cancel the random play function while a CD
is playing, all the tracks beyond the current track
number will be played in chronological order,
even if they have already been played while the
random play function was cut in.
You can choose to combine the RANDOM
function with the EDIT function and play your
favourite tracks in a random order. You can also
combine these two functions with SELECT and
choose to play only your favourite tracks from e.g.
two CDs in random order.
Playing tracks in random order
If you select the random play function you will
find that the tracks are played in a different
order each time the CDs or track series are
played.
CD
m
p
PAUSE
CD
MUTE
•
CD
RANDOM
RANDOM ON
RANDOM
RANDOM OFF
NOTE! Please refer to the chapters Select and
store a series of tracks for one CD and Enable or
disable playback of a track series in the
Reference Book with respect to further details of
the EDIT function.

8
You can make BeoSound 9000 play your
favourite CDs in a particular sequence. Every
time a CD is included in the sequence, the red
indicator next to the CD compartment lights
up.
If you want to, you can override the chosen
disc sequence and listen to a CD not included
in the sequence. Press the direct CD selection
button next to the CD you want to hear, and
playback will start immediately.
You can also choose to leave out a CD which
has already been included in the sequence
but only if you are still in the SELECT option*.
You press the direct CD selection button
again next to a CD you have already included.
>> Using the CD player
Press to start playback
of a CD
Press SELECT and
SELECT DISC will appear
in the display
Press the direct CD
selection buttons next
to the CDs you want to
include…
Press SELECT to start
clearing a sequence and
play all six CDs
Press to clear the
sequence
Choosing discs to include in a
sequence
The CDs you have chosen will start playing in
numerical order and continue to play for 12
hours if uninterrupted.
CD
SELECT
SELECT DISC
SELECT
CLEAR
*NOTE! The SELECT option lasts for 25 seconds
from when you pressed SELECT. If you press a
direct selection button after the SELECT option
has ended, the disc you chose will start playback
immediately and override your sequence. When it
has finished playing, BeoSound 9000 will continue
playing the sequence you chose before.

9
Switch on the radio
When you switch on the radio, it
automatically selects the station which you
last listened to, indicating on the display
which radio program is playing.
To listen to the radio, you must first
find and store the frequencies of the
radio stations.
You can store up to 60 different radio
stations in your BeoSound 9000
(refer to the Reference book for
further information).
Using the radio
Press to turn on the
radio
Press to step through
your radio programs
Press to switch to
stand-by
RADIO
m
p
•

10
Adjust the sound volume
While you are listening to the radio or CD
player, you can of course adjust the sound
volume, at any time.
Adjust the volume up or
down
Silences the speakers
immediately. Press again
to recall the sound
Adjust the volume
If you store a volume level,
BeoSound 9000 will start playing at
this level each time you switch it on.
Please refer to Adjust and store
sound settings in the Reference book
for further information about
adjusting and storing volume levels.
VOL r
VOL u
MUTE
3507468 0505 Printed in Denmark by Bogtrykkergården a-s, Struer

www.bang-olufsen.com