Bang & Olufsen BeoVision 10 User manual

BeoVision 10
Guide

2
Menu overview, 3
See an overview of on-screen menus.
Navigate in menus, 4
See how to use the different remote controls
for menu operation.
First-time setup, 5
Which menus appear when you switch on
the television for the very rst time.
Choose menu language, 6
How to select menu language.
Set positions for the television to turn
to, 7
How to preset positions for a motorised
stand to turn to.
Tuner setup, 8
How to disable the internal TV tuner or
built-in DVD-HD module.
Connections, 9
Examples of where to connect additional
equipment and how to connect a PC or
camera.
Register additional video equipment, 12
How to register connected equipment in the
CONNECTIONS menu.
Camera and headphone sockets, 15
How to watch digital pictures on your
television and how to connect headphones.
Edit tuned TV channels, 16
How to rearrange the order in which channels
appear in the channel list and how to name
or delete them.
Re-tune or add channels, 19
How to add new channels or how to make a
new automatic tuning.
Loudspeaker setup
– BeoVision 10-32, 20
How to connect loudspeakers.
Loudspeaker setup
– BeoVision 10-40/46, 21
How to make your television part of a
surround sound system, including how to
connect loudspeakers and adjust speaker
balance.
Adjust picture and sound settings, 25
How to make settings for picture and how
to adjust bass, treble, etc. How to use game
mode.
Daily use of speaker combinations
– BeoVision10-32, 28
How to switch between different speaker
combinations.
Daily use of speaker combinations
– BeoVision10-40/46, 29
How to switch between different speaker
combinations.
Set the television to switch itself on or
off, 30
How to make your television switch off
automatically or make it part of a PLAY
TIMER. How to make auto standby settings
and save power.
Set up your Beo4 remote control, 32
Tell the television if your remote control has
a navigation button or not.
Feature activation, 33
How enter an activation key and get access
to additional features.
HDMI Matrix, 34
How to enter settings in the HDMI MATRIX
menu.
Teletext, 36
How to store favourite teletext pages as
MEMO pages.
Operate other equipment with Beo4 or
Beo6, 37
How to operate connected equipment, such
as set-top boxes, DVD players or the like,
with the Bang & Olufsen remote control.
Connect and operate an audio system, 39
How to connect an audio system to your
television and operate an integrated audio/
video system.
Distribute sound and picture with
BeoLink, 42
How to make link connections, operate a
link system.
Your television in a link room, 44
How to set up and operate your television in
a link room.
Two televisions in the same room, 46
Option programming and operation of two
televisions in the same room.
Contents
Version 1.0 1106

3
TUNING
SLEEP TIMER
PLAY TIMER
OPTIONS
EDIT CHANNELS
ADD CHANNELS
AUTO TUNING
MANUAL TUNING
TIMER
CONNECTIONS
TUNER SETUP
SOUND
PICTURE
STAND POSITIONS
DTV PLAY TIMER
STANDBY SETTINGS
BEO4 SETTING
FEATURE ACTIVATION
MENU LANGUAGE
FREQUENCY
CHANNEL NO
NAME
FINE TUNE
DECODER
TV SYSTEM
SOUND
AV1–AV6
HDMI EXPANDER
LINK TUNING
TV TUNER
DVB HD
ADJUSTMENT
SPEAKER TYPE
SPEAKER DISTANCE*
SPEAKER LEVEL*
SOUND SYSTEM*
BRIGHTNESS
CONTRAST
COLOUR
TINT
HOR. SIZE
VERT. SIZE
HOR. POSITION
VERT. POSITION
GAME MODE
VIDEO
AUDIO
STANDBY
STAND ADJUSTMENT
MODE
GROUP
AUTO STANDBY
POWER SAVING
NAVIGATION BUTTON
NO NAVIGATION BUTTON
1. 2. 3.
Menu overview
*Only available on BeoVision 10-40/46.

4
If you have a Beo4 remote control
without navigation button, you must
use the ‘star’ to navigate up, down, left
and right in menus and press the centre
button to conrm choices and settings
in menus. Also your television must be
set up for use with a Beo4 without
navigation button.
Bring up the TV SETUP menu by pressing
MENU while the TV is on.
To back up through menus, press STOP.
To exit menus, press EXIT.
Navigate in menus
If you have a Beo4 with navigation
button and your television is set up for
use with it, see page 32, you use the
centre button with up, down, left and
right movement to navigate in menus.
Press in the middle of the centre button
to conrm selections and settings in
menus.
Bring up the TV SETUP menu by pressing
MENU while the TV is on.
To back up through menus, press BACK.
To exit menus, press and hold BACK.
If your television is set up for use
without navigation button, you must
use the ‘star’ to navigate up, down, left
and right in menus and press the centre
button to conrm selections and
settings in menus.
Beo4 with navigation button
Beo4 without navigation button
Beo6
If you operate your television with the
Beo6 remote control, you use the centre
button with up, down, left and right
movement to navigate in menus. Press
in the middle of the centre button to
conrm selections and settings in menus.
Bring up the TV SETUP menu by pressing
Menu while the TV is on.
To back up through menus, press BACK.
To exit menus, press and hold BACK.
If your Beo6 is set up to be used without
navigation button, press STOP to back up
through menus and BACK to exit menus.
Note that a Beo6 should be recongured
when you add new products to your setup.
You can also operate your television with
Beo5 which is operated similarly to Beo6.
GO
STOP
PLAY
BACK

5
MENU LANGUAGE… You can select the
language for on-screen menus. The text
on the screen changes as you move from
language to language.
STAND ADJUSTMENT … Set the maximum
angle for turn for the television. Use and
to turn the television and limit the
movement of the stand.
STAND POSITIONS … Set your preferred
preset positions for the television. For
further information about the STAND
POSITIONS menu, see page7.
TUNER SETUP … Disable the television tuner
or DVB tuner, if you like, see page8.
STANDBY SETTINGS … The television can be
set to switch itself to standby after some
time with no operation. You can also switch
power saving on or off, see page31 .
CONNECTIONS … Select the type of
equipment you have connected to each
socket, the sockets used, the product
name, and the source name. For further
information about the CONNECTIONS
menu, see page9.
CHECK AERIAL CONNECTION… This
prompt only appears, if the television
tuner is enabled.
AUTO TUNING … When you have registered
your connected equipment, a menu for
channel tuning automatically appears on
the screen. Press the centre button to
start auto tuning. The television nds all
available channels. For further information
about tuning TV channels, see page19.
SPEAKER TYPE… In this menu, you select
which speakers are connected to the
television, if any. See page20 for further
information.
SPEAKER DISTANCE… In this menu, you
select the distance in metres to each of
the speakers in your setup (only
BeoVision10–40/46).
SPEAKER LEVEL… In this menu, you can
adjust the volume level of each speaker in
your setup (only BeoVision10–40/46).
ADJUSTMENT… In this menu, you can
adjust bass, volume, treble, etc.
DVB SETUP… If the DVB-HD tuner is
enabled, the DVB SETUP menu appears,
see the separate DVB-HD guide for further
information.
For information about where to connect
extra equipment, see the chapter about
connection panels in Getting Started.
First-time setup
The setup procedure is activated
when the television is connected
to the mains and switched on for
the rst time. You are led
through an automatic series of
on-screen menus in which you
must register the extra equipment
you have connected, such as
loudspeakers.
If you change your setup at a later
date,
you can access the same
menus and update your settings.
Remember that you need to set
the speaker types and the
distances in the SOUND menu.
The sequence of menus in rst-time setup

6
Choose menu language
The menu language you choose
during the rst-time setup of
your television can be changed
at any time.
Once a menu language is chosen,
all menus and display messages
are shown in this language.
You can select the language for on-
screen menus via the TV SETUP menu.
The text on the screen changes as you
move from language to language.
> Bring up the TV SETUP menu and highlight
OPTIONS.
> Press the centre button to bring up the
OPTIONS menu and highlight MENU
LANGUAGE.
> Press the centre button to bring up the
MENU LANGUAGE menu.
> Use the navigation button up or down to
move to your language choice.
> Press the centre button to make your
choice.
> Press BACK to back up through previous
menus or press and hold BACK to leave
the menus.
MENU LANGUAGE
DANSK
DEUTSCH
ENGLISH
ESPAÑOL
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA

7
Set positions for the television to turn to
If your television is equipped
with the optional motorised
stand, you can turn it using the
remote control.
Furthermore, you can program
the television to turn
automatically to face your
favourite viewing position when
you switch on the television. It
can turn to a different position
when you listen to, for example,
a connected radio, and turn
away to a standby position when
you switch it off.
You can also turn your television
by hand.
NOTE! For information about rst-
time installation of the motorised
stand, see Getting Started.
Choose one position for when you
switch the television on, one for audio
mode, and one for when you switch it off.
> Bring up the TV SETUP menu and highlight
OPTIONS.
> Press the centre button to bring up the
OPTIONS menu and highlight STAND
POSITIONS.
> Press the centre button to bring up the
STAND POSITIONS menu.
> Press the centre button to determine the
VIDEO position.
> Use and to turn the television and
place it according to your viewing position.
> Press the centre button to store the
position.
To store a stand position for when an
audio source is switched on from the
television …
> Highlight AUDIO.
> Press the centre button to determine the
AUDIO position.
> Use and to turn the television and
place it as you wish.
> Press the centre button to store the
position.
To store a stand position for when the
television is switched off and in
standby …
> Highlight STANDBY.
> Press the centre button to determine the
STANDBY position.
> Use and to turn the television and
place it as you wish.
> Press the centre button to store the
position.
> During rst-time setup, press the green
button to continue rst time-setup,
otherwise …
> …press and hold BACK to leave all menus.
STAND POSITIONS
VIDEO
AUDIO
STANDBY

8
To disable the internal tuner …
> Bring up the TV SETUP menu and highlight
OPTIONS.
> Press the centre button to bring up the
OPTIONS menu, and highlight TUNER
S E T UP.
> Press the centre button to bring up the
TUNER SETUP menu and highlight TV
TUNER.
> Use the navigation button left or right to
switch between the setting ON or OFF.
> Highlight DVB HD.
> Use the navigation button left or right to
switch between the setting ON or OFF.
> Press the centre button to store the
settings, or …
> … press and hold BACK to leave the
menus without storing.
Tuner setup
If you disable the TV tuner, you
can activate the DVB tuner with
the TV button. If you disable the
DVB tuner, you can activate a
connected peripheral unit with
the DTV button.
TUNER SETUP
TV TUNER ON
DVB HD ON

9
Connections
The connection panel on your
television allows you to connect
signal input cables as well as a
variety of extra equipment, such
as a video recorder or a linked
Bang & Olufsen music system.
Any equipment you connect to
these sockets must be registered
in the CONNECTIONS menu. For
further information, see page12.
Before you connect any equipment
to your television, remember to
disconnect the television from the
mains.
There are some restrictions as to the types of
equipment that can be connected to the
sockets.
Equipment with VGA output can only be
connected and registered to the AV3 socket.
The illustrations above are only examples.
In a BeoVision10-32 setup with Power Link
speakers and a subwoofer, the subwoofer
must be connected to the television and the
speakers must be connected to the subwoofer.
Only front speakers can be connected.
See page20 for further information.
POWER LINK
SUB
POWER LINK
REAR
POWER LINK
FRONT
DVB
AERIAL
AV 4
Recorder (HDR)
AV 1–6
PUC 1–4
AV 1–6
PUC 1–4
Satellite (STB)
DVD
AV 2
Decoder
BeoVision10-40/46 setup

10
In the AV menus you can select how a
PUC controlled product is connected.
You can choose between ‘PLUG’ (cable)
and ‘IR’ (IR Blaster).
IR-transmitters: To operate non-Bang&
Olufsen products with a Bang& Olufsen
remote control, attach a Bang& Olufsen IR-
transmitter to each of the products. Connect
each transmitter to the corresponding socket
marked PUC on the main connection panel.
>> Connections
The CA module is a ‘card reader’ for your
Smart Card which decodes the coded
signals sent out by the programme
provider.
The CA module has one protruding edge on
one side and two protruding edges on the
other side. The side with two edges should
face upwards.
When inserting a card, the gold chip should
face away from the screen.
IR type
DVB module
STB
STB
PLUG
IR
SMARTCARD
PCMCIA