Banzai PIRATE SHIP 59073 User manual

IMPORTANT SAFETY INSTRUCTIONS.
PLEASE READ AND SAVE THESE INSTRUCTIONS BEFORE SETUP AND USE.
KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.
FOR AGES 5+
ADULT SET UP IS REQUIRED.
59073
PIRATE SHIP
PIRATE SHIPPIRATE SHIP
Ahoy Matey
Ahoy MateyAhoy Matey
™

IMPORTANT SAFETY INSTRUCTIONS.
PLEASE READ AND SAVE THESE INSTRUCTIONS BEFORE SETUP AND USE.
KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.
FOR AGES 5+
ADULT SET UP IS REQUIRED.
Part List
2 Inflatable sword x 1
1 Inflatable Ahoy Matey
PIRATE SHIP™ x 1
4 Inflatable steering wheel x 1
3 Water blaster x 1
5 Repair patch x 1
BANZAI 59073 20120910 1

Safety Information
2 BANZAI 59073 20120910
Warning!
To avoid the risk of serious injury or death;
• Adult supervision required.
• Adult assembly required.
• This product is intended to be used as a toy and
not as a personal flotation device.
• Do not hang on, stand on or tackle this product.
• Do not use a high pressure pump to inflate.
• Do not over-inflate.
• Do not use electric air pump if water or moisture is
present. This may result in electric shock.
• Use product in swimming pool only.
• Read all instructions before using this product.
• Never drive this product over other swimmers.
• Do not dive underneath this product.
• Disregard and not following the instructions from
manual and warnings could result in injury or
death, especially for children.
• Only for use in water in which the child is within its
depth.
• Do not shoot water blaster cannon directly at
person’s eyes or face.
While every attempt is made to embody the highest
degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes
all risk of injury resulting from use. All merchandise
is sold on this condition, which no representative of
the company can waive or change.
SAFETY CHECKLIST: READ BEFORE USING
Setup
1. The inflation and deflation of the product should
be done by an adult or in the presence of an
adult.
2. All inflatables are temperature sensitive, therefore
never unfold or inflate in temperatures below
50°F.
3. Once inflated, make sure that the product does
not come in contact with stones, gravel or other
sharp objects which could puncture the inflatable.
4. Do not use compressed air to inflate the product.
Use a hand or foot pump. Do not over inflate.
5. Please inflate the air-chamber in correct
sequence as shown. You should be able to see
some crease at welding seams.
6. To inflate product, pinch the stem of the safety
valve to allow air in. When fully inflated, close
safety valve by pushing it down gently. To
deflate, pull up safety valve and press stem
together to let the air out.
7. To prevent premature material fatigue, refrain
from exposing the product to sunlight unneces-
sarily. Over sun exposure may cause leakage.
Use
1. This is a toy and not a life saving flotation device.
It should not be used as such.
2. Attention! This product should be used in water
level no higher than the neck of a standing child
and under adult supervision.
3. There should be a minimum of 6 ft (183cm)
between the product rafts and the swimming pool
wall to prevent the possibility of the child falling
off and hitting their head on the edge of the pool’s
wall.
4. Do not allow anyone to use this product who
weighs over 100 lbs (45kg).
After use
1. Carefully deflate, dry, roll up and store this
product when not in use.
2. Do not store this product indoors or in a closed
container until it is completely dry.
3. Store this product in a secure place, away from
children, to prevent suffocation.

Safety Information
BANZAI 59073 20120910 3
Repair patch instructions
For your convenience, a repair patch has been
included to repair holes in the inflatable section.
Do not use the patch for holes or rips on the seam.
In the event of an accidental puncture, cut out a
suitably sized patch. Make sure you round the
corners of your repair patch to avoid peeling. Make
sure the area to be patched is clean and dry. Press
patch firmly over the puncture. Do not inflate for 20
minutes.

Setup Instructions
1. Placement diagram:
Use in swimming pools
only, not on pavement
or other hard surfaces.
2. Roll out this product.
Inspect for holes, tears
or other damage.
3. Insert the water blaster
into the hole of this
product before inflating.
4. Inflate this product with
AIR.
NOTE: For easy air
inflation use a manual air
pump designed specifi-
cally for plastic inflatables.
1.
4.
3.
4 BANZAI 59073 20120910
2.

OROR
Setup Instructions
4. BY MOUTH: Remove
the air valve plug and
squeeze the base of
the valve causing the
inner flap to open for
inflation. Do not over
inflate the item. Once
the item is completely
inflated, then insert the
air valve plug to seal it
shut.
BY PUMP: Remove
the air valve plug and
insert air pump nozzle
into the valve. The air
pump nozzle should be
inserted deep enough
to open the inner valve
flap. Be careful not to
over inflate the item.
Once the product is
completely inflated,
quickly remove the air
pump nozzle and
re-insert the air valve
plug to seal it shut.
NOTE: Fill inflatable with
air until it is firm and solid.
If there is any straining at
the seams, the item is
over inflated. If any seam
begins to strain,
immediately stop inflation
and release air to reduce
the pressure until all signs
of stress on the inflatable
are gone. DO NOT use
the inflatable if there is
straining at the seams.
Use of an over-inflated
item may result in serious
injury, paralysis or death.
5. The flexible tubing from
the water blaster
should be inserted into
the hole of the float so
that it submerses in the
pool water.
4.
BANZAI 59073 20120910 5
5.

How to play
Climb aboard the Ahoy
Matey Pirate Ship™ if
you dare! With your pick
of weapons (the sword or
water-blaster), you’ll
easily scare off all of your
enemies. Or, steer
your ship back to land
and search for buried
treasure. Either way, you
and your friends are
guaranteed to have a
jolly good time!
1. When this product is
completely dry carefully
deflate it.
Pull out the water
blaster and tubing from
the hole of this product
after deflating.
2. When this product is
completely dry,
carefully roll it up and
store in a secure
location away from
children. Do not store it
indoors or in a closed
container until it is
completely dry.
Use Instructions, After Use and Storage
1.
2.
6 BANZAI 59073 20120910

PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE.
COLORS AND CONTENTS MAY VARY.
LOS ANGELES, CA 90064.
ALL RIGHTS RESERVED
MADE IN CHINA
www.toyquest.com
DO NOT RETURN TO STORE
THIS PRODUCT CANNOT BE RETURNED FOR
A REFUND AFTER IT HAS BEEN UNPACKED AND USED.
FOR QUESTIONS OR PROBLEMS WITH THIS PRODUCT,
PLEASE CONTACT CUSTOMER SERVICE AT
CUSTOMERSERVICE
@ TOYQUEST.COM