Barco BC1275 User manual

BC1275 REV# 2 7-15-2016
BC1276
BC1277
BC1278
BC1315
BC1316
BC1317
BC1318
BENCH INSTRUCTIONS

SEAT SLAT
X8
BENCH END
ABC-SSI1020
X2
1/4" X 1.50" LAG SCREW
X16
F0002
REQUIRED TOOLS:
-(1) SCREW GUN
-(1) 7/16" SOCKET
-(1) 8" - 10" POST HOLE DIGGER
-(1) LEVEL
1/4" FLAT WASHER
X16
F0001
REQUIRED MATERIALS:
-READY-TO-MIX CONCRETE
-LOOSE GRAVEL
-WIRE & BRACING MATERIAL
BEFORE INSTALLING BENCH, PLEASE CHECK LOCAL CODES TO ENSURE PROPER
INSTALLATION. THESE INSTRUCTIONS ARE A GENERAL GUIDELINE ON HOW TO
INSTALL A BENCH. IF UNSURE ON HOW TO INSTALL, PLEASE CONTACT A
PROFESSIONAL.
BENCH INSTRUCTIONS
INCLUDED HARDWARE &
REQUIRED TOOLS FOR
ASSEMBLY
2/6

SEAT SLATS
SPACING DETAIL
T
F0002
F0001
PRE-DRILLED PILOT HOLE
(BACK VIEW)
V
1/8"
SPACING
AA
DETAIL AA
SCALE 1 : 7
F0001
F0002
PRE-DRILLED PILOT HOLE
1
KEEP SPACING BETWEEN BOARDS
APPROXIMATELY 1/8".
REPEAT STEPS FOR REMAINING SEAT
SLATS
BENCH INSTRUCTIONS
3/6

26.000
(8" - 10" DIAMETER)
4.000
48.00 6FT BENCH
24.00 4FT BENCH
LOOSE GRAVEL
2
USING POST HOLE DIGGER, DIG TWO HOLES AS SHOWN BELOW. THEN, FILL IN EACH HOLE WITH APPROXIMATELY 4" OF
LOOSE GRAVEL.
BEFORE INSTALLING BENCH, PLEASE CHECK LOCAL CODES TO ENSURE PROPER
INSTALLATION. THESE INSTRUCTIONS ARE A GENERAL GUIDELINE ON HOW TO
INSTALL A BENCH. IF UNSURE ON HOW TO INSTALL, PLEASE CONTACT A
PROFESSIONAL.
BENCH INSTRUCTIONS
4/6

17" - 18"
17.0 in -18.0 in
26.0 in to 28.0 in
CAREFULLY, PLACE THE BENCH INTO HOLES. CENTER EACH POST IN EACH HOLE AND LEVEL BENCH. ALSO, BE SURE
TO CHECK SEAT HEIGHT TO ENSURE COMFORTABLE SEATING. SECURE PLACEMENT OF BENCH WITH BRACING
MATERIALS AND FILL IN HOLES WITH READY-TO-MIX CONCRETE. ALLOW TO DRY AND REMOVE BRACING
MATERIALS.
3
BEFORE INSTALLING BENCH, PLEASE CHECK LOCAL CODES TO ENSURE PROPER
INSTALLATION. THESE INSTRUCTIONS ARE A GENERAL GUIDELINE ON HOW TO
INSTALL A BENCH. IF UNSURE ON HOW TO INSTALL, PLEASE CONTACT A
PROFESSIONAL.
BENCH INSTRUCTIONS
5/6

10.750
10.750
71.875 6FT BENCH
47.875 4FT BENCH
45.500
25
31.360
GROUND
14.375
3.500
3.500
13.635
8
17.000-18.000
21.465
TOP VIEW
CONSTRUCTION MATERIALS:
Recycled Plastic, Powder Coated Steel
HARDWARE:
Stainless Steel
ALL DIMENSIONS SHOWN IN INCHES
BC1275
BC1276
BC1277
BC1278
BC1315
BC1316
BC1317
BC1318
SET POSTS 24 TO 26 INCHES INTO GROUND
BENCH SPECIFICATIONS