Barco MDSC-2326 DDIH User manual

MDSC-2326
User Guide
MDSC-2326 DDIH
MDSC-2326 MNAH
K5902135 (451920612561)/00
28/02/2017

Barco NV
Beneluxpark 21, 8500 Kortrijk, Belgium
Phone: [phone]
Fax: [phone]
Support: www.barco.com/en/support
Visit us at the web: www.barco.com
Registered address: Barco NV
President Kennedypark 35, 8500 Kortrijk, Belgium
Phone: [phone]
Fax: [phone]
Support: www.barco.com/en/support
Visit us at the web: www.barco.com
PrintedinBelgium

Table of contents
TABLE OF CONTENTS
1. Welcome! .......................................................................................... 3
1.1 About the product ............................................................................................. 3
1.2 What’s in the box.............................................................................................. 4
1.3 About this user guide ......................................................................................... 4
2. Product overview ................................................................................ 5
2.1 Front view...................................................................................................... 5
2.2 Rear view ...................................................................................................... 6
2.3 Connector view................................................................................................ 6
2.3.1 MDSC-2326 DDIH version ............................................................................. 6
2.3.2 MDSC-2326 MNAH version............................................................................ 7
2.4 Connector pin assignments.................................................................................. 8
2.4.1 Input power connector .................................................................................. 8
2.4.2 DVI-1 connector (DVI-I)................................................................................. 8
2.4.3 DVI-2 connector (DVI-D)................................................................................ 9
2.4.4 DVI out connector (DVI-D) .............................................................................10
2.4.5 RS232 connector........................................................................................11
2.4.6 USB connector...........................................................................................11
2.4.7 Mini USB connector.....................................................................................12
2.4.8 DisplayPort connector ..................................................................................12
2.4.9 S-Video and S-Video-out connector...................................................................13
3. Display installation .............................................................................. 15
3.1 VESA mount installation......................................................................................15
3.2 Cover removal.................................................................................................16
3.3 Video input connection .......................................................................................16
3.3.1 MDSC-2326 DDIH version .............................................................................16
3.3.2 MDSC-2326 MNAH version............................................................................17
3.4 Video output connection......................................................................................18
3.4.1 MDSC-2326 DDIH version .............................................................................18
3.4.2 MDSC-2326 MNAH version............................................................................18
3.5 Nexxis OR .....................................................................................................19
3.6 Power supply connection.....................................................................................19
3.7 Cable routing ..................................................................................................20
4. Daily operation ................................................................................... 23
4.1 Keyboard activation/deactivation............................................................................23
4.2 Keyboard backlight ...........................................................................................24
4.3 On/Off switching...............................................................................................24
4.4 Power led status ..............................................................................................24
4.5 OSD menu activation.........................................................................................25
4.6 OSD menu navigation ........................................................................................25
4.7 Shortkey functions ............................................................................................26
4.7.1 Main source selection...................................................................................27
4.7.2 Multi-image configuration...............................................................................27
4.7.3 Zoom factor selection ...................................................................................27
4.7.4 Brightness adjustment ..................................................................................27
4.8 Extended keyboard functions................................................................................28
4.8.1 Main source selection...................................................................................29
4.8.2 Second source selection................................................................................29
4.8.3 Multi-image configuration...............................................................................29
4.8.4 Common Functions: Transfer function selection.....................................................30
4.8.5 Common Functions: Image size selection............................................................30
4.8.6 Common Functions: Zoom factor selection ..........................................................31
4.9 Menu locking/unlocking ......................................................................................31
5. Advanced operation ............................................................................. 33
5.1 OSD picture menu ............................................................................................33
K5902135 (451920612561) MDSC-2326 28/02/2017 1

Table of contents
5.1.1 Profile.....................................................................................................33
5.1.2 Brightness................................................................................................33
5.1.3 Contrast ..................................................................................................34
5.1.4 Saturation ................................................................................................34
5.1.5 Color temperature.......................................................................................34
5.1.6 Gamma...................................................................................................35
5.1.7 Sharpness................................................................................................35
5.2 Picture Advanced menu......................................................................................36
5.2.1 Black Level...............................................................................................36
5.2.2 Smart Video..............................................................................................36
5.2.3 Image Position...........................................................................................37
5.2.4 Auto Adjustment.........................................................................................37
5.2.5 Phase.....................................................................................................37
5.2.6 Clock/Line................................................................................................38
5.3 Display Format menu.........................................................................................38
5.3.1 Main Source (Primary Source).........................................................................38
5.3.2 Component Mode .......................................................................................39
5.3.3 Zoom......................................................................................................39
5.3.4 Image Size ...............................................................................................40
5.3.5 2nd Picture Mode ........................................................................................40
5.3.6 2nd Picture Source.......................................................................................41
5.3.7 2nd Picture Position......................................................................................42
5.3.8 Picture Swap.............................................................................................42
5.4 Configuration menu...........................................................................................43
5.4.1 Information ...............................................................................................43
5.4.2 Language.................................................................................................43
5.4.3 Failover mode............................................................................................44
5.4.4 Extended keyboard......................................................................................44
5.4.5 OSD setting ..............................................................................................45
5.4.5.1 OSD Horizontal Position ..........................................................................45
5.4.5.2 OSD Vertical Position .............................................................................45
5.4.5.3 OSD Time-out......................................................................................45
5.4.6 Recall Profile.............................................................................................46
5.4.7 Save Profile..............................................................................................46
5.5 System menu..................................................................................................46
5.5.1 Power on DVI 1..........................................................................................47
5.5.2 Power on DVI 2..........................................................................................47
5.5.3 DVI Output ...............................................................................................47
5.5.4 Keyboard lock............................................................................................49
5.5.5 Keyboard backlight......................................................................................49
5.5.6 Power Saving............................................................................................49
6. Important information ........................................................................... 51
6.1 Safety information.............................................................................................51
6.2 Environmental information ...................................................................................54
6.3 Biological hazard and returns................................................................................56
6.4 Regulatory compliance information .........................................................................56
6.5 Cleaning and disinfection ....................................................................................57
6.6 Explanation of symbols.......................................................................................57
6.7 Legal disclaimer...............................................................................................60
6.8 Technical specifications ......................................................................................61
6.9 Open source license information............................................................................65
2K5902135 (451920612561) MDSC-2326 28/02/2017

1. Welcome!
1. WELCOME!
1.1 About the product
Overview
Barco’s MDSC-2326 is a 26-inch surgical display that offers very high brightness for improved visualization
under all ambient conditions. Purpose-built for the operating room, the MDSC-2326 features an easy-
clean design, smart mechanics and the most accurate FHD images in the operating room today.
Ease of mind
Calibrated, artifact free images
The display’s high brightness, high contrast and calibrated colors provide surgeons with excellent depth
perception and the most accurate images from FHD endoscopy camera systems.
Multi-source, multi-display imaging
With its broad input connectivity, the MDSC-2326 offers flexible multi-modality imaging (PiP & PaP) in new
integrated operating rooms. Featuring an integrated Barco Nexxis decoder (MNAH versions only) it offers
the most convenient visualization solution for uncompressed video-over-IP without delay.
Safety, stability and redundancy
Thanks to its high-bright LED backlight with light output stabilization, the display ensures lifetime long
performances and image consistency. It also offers a programmable automated failover feature, which
ensures that the display automatically switches to a backup source in case the MAIN signal gets lost. The
display will automatically switch back to the MAIN signal once it becomes available again.
Ease of installation
The MDSC-2326 comes with a smart cable management system that hides the cables for a clutter-free
set-up. Its lightweight design allows easy mounting on surgical booms and spring arms.
Ease of use
Barco’s MDSC-2326 allows for easy cleaning and disinfection thanks to its smooth surface, splash-proof
housing. It comes with a highly durable, scratch-resistant front glass featuring excellent optical perfor-
mance.
Features
• 26-inch wide-screen LCD with full HD resolution and 10–bit per color
• Wide viewing angle
• High-brightness LED backlight
• Scratch resistant front glass
• Backlight Output Stabilization (BLOS)
• Advanced, full 10-bit image processing algorithms with 12-bit LUT
• Widest range of SD and HD input signals, including 3G-SDI and DisplayPort
• Light weight to easily mount onto a boom
Innovative features are also available to give maximum flexibility when installing the display as: Config-
urable DVI-out and Failover Mode.
K5902135 (451920612561) MDSC-2326 28/02/2017 3

1. Welcome!
1.2 What’s in the box
Overview
Your MDSC-2326 display comes with:
• MDSC-2326 user guide
•DVIcable
• AC power cords
• external power supply
• 4 screws, 4 dented washers and an Allen key
Keep your original packaging. It is designed for this display and is the ideal protection
during transport.
The user guide is available in other languages on www.barco.com.
1.3 About this user guide
Overview
This manual provides support to the user during the installation, set up and utilization of the MDSC-2326
display. Depending on the specific version that has been purchased, some of the features and options
described in this document may not apply to the display in user’s hands.
4K5902135 (451920612561) MDSC-2326 28/02/2017

2. Product overview
2. PRODUCT OVERVIEW
2.1 Front view
Overview
1 2 3 4 5 6 7
Image 2-1
1. Input Selection key
2. Multi-image selection key / Down key
3. Image zoom key / Up key
4. OSD Menu key / Enter key
5. Brightness decrease / Left key
6. Brightness increase / Right key
7. Stand-by key
A 7-key capacitive keypad is located on the front of the display. By default only the stand-by key is visible.
When you touch any of the keys shortly, the front illumination of all other keys is switched on for a few
seconds. When you touch any of these other keys again while the illumination is on, the function of the
key is executed. If no further action is taken within the time-out, the front key illumination is switched off
again.
The auto-dim function of the front key illumination can be disabled in the OSD menu.
For keyboard activation please refer to "Keyboard activation/deactivation", page 23
K5902135 (451920612561) MDSC-2326 28/02/2017 5

2. Product overview
2.2 Rear view
Overview
4
1
5
1
1 1
3
2
Image 2-2
1. VESA mount screw holes
2. Cable routing channel
3. Cable routing channel expansion clip
4. Connector compartment cover
5. Connector compartment cover fixation screw
2.3 Connector view
2.3.1 MDSC-2326 DDIH version
Overview
2 3 4 5 10 14 15 16 18
1198761 12 13 17
19
Image 2-3
1. DVI-2
2. RS232
3. Input power connector
4. DVI out
5. DVI-1 (digital & analog – HDMI video support with HDCP)
6. SDI-2 out
7. SDI-2
8. SDI-1 out
9. SDI-1
10. DisplayPort (VESA std 1.1a)
11. Sync
6K5902135 (451920612561) MDSC-2326 28/02/2017

2. Product overview
12. CVBS
13. CVBS out
14. R/Pr
15. G/Y
16. B/Pb
17. S-Video out
18. S-Video
19. Service
2.3.2 MDSC-2326 MNAH version
Overview
1 2 4 6 7 8 9 10 13 17 18 19 21
141211515 16 20
22
3
Image 2-4
1. Optical 10Gb Ethernet SFP+ interface*
2. LED2*
- Orange blinking: Activity = (Tx) or (Rx)
- Off: No network activity
3. LED1*
- Green: Link is active
- Off: No active network connection
4. LED3*
- Green: Power on, normal operation
- Off: System not powered
- Orange blinking: Error
5. Micro USB interface*
6. USB 2.0 type A interface*
7. RS232
8. Input power connector
9. DVI out
10. DVI-1 (digital & analog – HDMI video support with HDCP)
11. SDI-1 out**
12. SDI-1**
13. DisplayPort (VESA std 1.1a)
14. Sync
15. CVBS
16. CVBS out
17. R/Pr
18. G/Y
19. B/Pb
20. S-Video out
21. S-Video
22. Service
K5902135 (451920612561) MDSC-2326 28/02/2017 7

2. Product overview
(*) Nexxis OR functionality: for more detailed information on Barco’s Nexxis integrated OR solution please
refer to the dedicated user guides. Please visit my.barco.com to obtain these user guides.
(**) SDI is not always present in combination with Nexxis input
2.4 Connector pin assignments
2.4.1 Input power connector
Overview
Image 2-5
1. GND
2. Not connected
3. +24 VDC
4. GND
5. Shield
6. +24 VDC
The ground and the shield connections on the power input connector have no Protec-
tive Earth function. A Protective Earth connection is provided via a dedicated pin (see
"Power supply connection", page 19).
2.4.2 DVI-1 connector (DVI-I)
Overview
Image 2-6
1. D2_Rx- (T.M.D.S.)
2. D2_Rx+ (T.M.D.S.)
3. GND (data 2 shield)
4. Not connected
5. Not connected
6. SCL (for DDC)
7. SDA (for DDC)
8. Analog vertical sync
9. D1_Rx- (T.M.D.S.)
10. D1_Rx+ (T.M.D.S.)
11. GND (data 1 shield)
12. Not connected
13. Not connected
14. +5V input (DDC supply) (*)
15. GND (cable sense)
8K5902135 (451920612561) MDSC-2326 28/02/2017

2. Product overview
16. Hot plug detect (*)
17. D0_Rx- (T.M.D.S.)
18. D0_Rx+ (T.M.D.S.)
19. GND (data 0 shield)
20. Not connected
21. Not connected
22. GND (clock shield)
23. CK_Rx+ (T.M.D.S.)
24. CK_Rx- (T.M.D.S.)
25. C1: Analog Red
26. C2: Analog Green
27. C3: Analog Blue
28. C4: Analog horizontal sync
29. C5: Analog GND return (analog R, G, B)
(*) +5 VDC output selectable on either pin 14 or 16 via the OSD menu. (+5V ± 10% @ 500mA (max))
PC analog (VGA) input source can be connected to the DVI-I input connector using a
DVI-I to VGA adapter. The use of an adapter cable of at least 0.15 m long will allow an
easy placement inside the cable cover.
2.4.3 DVI-2 connector (DVI-D)
Overview
Image 2-7
K5902135 (451920612561) MDSC-2326 28/02/2017 9

2. Product overview
1. D2_Rx- (T.M.D.S.)
2. D2_Rx+ (T.M.D.S.)
3. GND (data 2 shield)
4. Not connected
5. Not connected
6. SCL (for DDC)
7. SDA (for DDC)
8. Not connected
9. D1_Rx- (T.M.D.S.)
10. D1_Rx+ (T.M.D.S.)
11. GND (data 1 shield)
12. Not connected
13. Not connected
14. +5V input (DDC supply) (*)
15. GND (cable sense)
16. Hot plug detect (*)
17. D0_Rx- (T.M.D.S.)
18. D0_Rx+ (T.M.D.S.)
19. GND (data 0 shield)
20. Not connected
21. Not connected
22. GND (clock shield)
23. CK_Rx+ (T.M.D.S.)
24. CK_Rx- (T.M.D.S.)
(*) +5 VDC output selectable on either pin 14 or 16 via the OSD menu. (+5V ± 10% @ 500mA (max))
2.4.4 DVI out connector (DVI-D)
Overview
Image 2-8
10 K5902135 (451920612561) MDSC-2326 28/02/2017

2. Product overview
1. D2_Rx- (T.M.D.S.)
2. D2_Rx+ (T.M.D.S.)
3. GND (data 2 shield)
4. Not connected
5. Not connected
6. SCL (for DDC)
7. SDA (for DDC)
8. Not connected
9. D1_Rx- (T.M.D.S.)
10. D1_Rx+ (T.M.D.S.)
11. GND (data 1 shield)
12. Not connected
13. Not connected
14. +5V output (*)
15. GND (cable sense)
16. Hot plug detect
17. D0_Rx- (T.M.D.S.)
18. D0_Rx+ (T.M.D.S.)
19. GND (data 0 shield)
20. Not connected
21. Not connected
22. GND (clock shield)
23. CK_Rx+ (T.M.D.S.)
24. CK_Rx- (T.M.D.S.)
(*) +5 VDC output always available. (+5V ± 10% @ 500mA (max))
2.4.5 RS232 connector
Overview
Image 2-9
1. Not connected
2. Rx (driven by host)
3. Tx (driven by display)
4. Not connected
5. Ground
6. Not connected
7. Not connected
8. Not connected
9. Not connected
2.4.6 USB connector
Overview
Image 2-10
K5902135 (451920612561) MDSC-2326 28/02/2017 11

2. Product overview
1. +5 VDC
2. Data -
3. Data +
4. GND
2.4.7 Mini USB connector
Overview
12345
Image 2-11
1. +5 VDC
2. Data -
3. Data +
4. Not connected
5. GND
2.4.8 DisplayPort connector
Overview
19 17 15 13 11 9 7 5 3 1
20 18 16 14 12 10 8 6 4 2
Image 2-12
1. ML_Lane 0 (p)
2. GND
3. ML_Lane 0 (n)
4. ML_Lane 1 (p)
5. GND
6. ML_Lane 1 (n)
7. ML_Lane 2 (p)
8. GND
9. ML_Lane 2 (n)
10. ML_Lane 3 (p)
11. GND
12. ML_Lane 3 (n)
13. CONFIG1
14. CONFIG2
15. AUX CH (p)
16. GND
17. AUX CH (n)
18. Hot Plug
19. Return
20. DP_PWR (+3.3 VDC @ 500 mA max)
12 K5902135 (451920612561) MDSC-2326 28/02/2017

2. Product overview
2.4.9 S-Video and S-Video-out connector
Overview
Image 2-13
1. Ground (Y)
2. Ground (C)
3. Luminance (Y)
4. Chroma (C)
5. SG: Shielded Ground
K5902135 (451920612561) MDSC-2326 28/02/2017 13

2. Product overview
14 K5902135 (451920612561) MDSC-2326 28/02/2017

3. Display installation
3. DISPLAY INSTALLATION
3.1 VESA mount installation
Overview
The display supports mounting arm & stands according to the VESA 100 mm standard.
CAUTION:Use an arm that is approved by VESA.
CAUTION:Use an arm that can support a weight of least 10 kg (22,05 lbs).
The monitor VESA interface has been designed for a safety factor 6 (to support 6 times
the monitor weight). In the medical system, use an arm with suitable safety factor
(IEC60601–1).
To mount the display to an arm stand
1. Attach the arm stand firmly to the panel using the included 4 hexagonal screws (M4 x 25 mm) and the
dented washers. Use the included Allen key to fixthescrews.
Image 3-1
CAUTION:The4screwsincludedwiththisdisplay(M4x25mm)canbeusedforan
external VESA arm interface with a thickness of up to 5mm.
If, due to the thickness of the external VESA arm interface (=V), the length of the provided
screws (=L) is not suitable, consider the following rule:
Lmin =V+20mm
Lmax =V+30mm
K5902135 (451920612561) MDSC-2326 28/02/2017 15

3. Display installation
3.2 Cover removal
To remove the connector compartment cover
1. Loosen the screw fixing the connector compartment cover.
2. Slide the cover downwards to remove it from the display.
1
2 2
Image 3-2
3.3 Video input connection
About video input connections
The MDSC-2326 can have multiple different video inputs connected (depending on the display version).
Switching between the different inputs can be easily done by pressing the direct access key for this. See
the dedicated section for more info.
Futhermore, if more than one video source is connected, the Picture in Picture (PiP) and Side-by-Side
(SbS) functionality becomes available, allowing you to view two different video inputs at once. Please
refer to the dedicated chapter for more info on how to activate and use the PiP and SbS features on your
MDSC-2326.
This chapter describes how to connect the different video input types for each version of the MDSC-2326.
3.3.1 MDSC-2326 DDIH version
To connect the video inputs
1. Connect one or more of the available video source(s) to the corresponding video inputs using the ap-
propriate video cable(s).
- DVI 1 or VGA (*): 6
-DVI2:1
-DisplayPort:7
-SDI1:3
-SDI2:2
- R/G/B/S: 8/9/10/4
- R/G/B (SOG): 8/9/10
- Y/Pb/Pr: 9/10/8
- CVBS: 5
- S-Video: 11
(*) PC analog (VGA) input source can be connected to the DVI-I input connector using a DVI-I to VGA
adapter. The use of an adapter cable of at least 0.15 m long will allow an easy placement inside the
cable cover.
16 K5902135 (451920612561) MDSC-2326 28/02/2017

3. Display installation
6 7 8 9 10
31 4 5
11
2
Image 3-3
3.3.2 MDSC-2326 MNAH version
To connect the video inputs
1. Connect one or more of the available video source(s) to the corresponding video inputs using the ap-
propriate video cable(s).
-Nexxis:4
- DVI or VGA (*): 5
-DisplayPort:6
-SDI(**):1
- R/G/B/S: 6/7/8/2
- R/G/B (SOG): 7/8/9
- Y/Pb/Pr: 8/9/7
- CVBS: 3
- S-Video: 10
(*) PC analog (VGA) input source can be connected to the DVI-I input connector using a DVI-I to VGA
adapter. The use of an adapter cable of at least 0.15 m long will allow an easy placement inside the
cable cover.
(**) SDI is not always present in combination with Nexxis input
5 6 7 8 9
1 2 3
104
Image 3-4
K5902135 (451920612561) MDSC-2326 28/02/2017 17

3. Display installation
3.4 Video output connection
About video output connections
Beside the video input connections, the MDSC-2326 also has video output capabilities allowing you to
loop-through certain video inputs connected with the MDSC-2326 to another display, projector, video
recorder, ...
This chapter describes how to make use of the video output connections available for each version of the
MDSC-2326.
3.4.1 MDSC-2326 DDIH version
To connect the video outputs
1. Connect one or more of the available video sink(s) to the corresponding video outputs using the appro-
priate video cable(s).
-SDI1:2
-SDI2:1
- CVBS: 3
- S-Video: 4
- DVI 1 or DVI 2: 5 (to be configured in OSD menu, see "DVI Output", page 47)
5
2 3 41
Image 3-5
3.4.2 MDSC-2326 MNAH version
To connect the video outputs
1. Connect one or more of the available video sink(s) to the corresponding video outputs using the appro-
priate video cable(s).
-SDI(*):1
- CVBS: 2
- S-Video: 3
-DVI:4(tobeconfigured in OSD menu, see "DVI Output", page 47)
- NexxisonDVI:4(tobeconfigured in OSD menu, see "DVI Output", page 47)
(*) SDI is not always present in combination with Nexxis input
18 K5902135 (451920612561) MDSC-2326 28/02/2017