Barco MFGD 3220 D User manual

MFGD 3220 D
User Manual
B410024/02
November2002
©2002 BARCONV.Allrights reserved
BarcoView
Theodoor Sevenslaan 106
8500 Kortrijk, Belgium
Phone: [phone]
Fax: [phone]
E-mail: [email protected]
http://www.barcoview.com
BarcoView Inc
3059 Premiere Parkway
Duluth, Georgia, 30097,USA
Phone: [phone]
Fax: [phone]
E-mail: [email protected]
http://www.barcoview.com
BarcoView LTD
16F-1, Cheng Loong Plaza 33, Min Sheng Road
Section 1, Pan Chiao, Taipei Hsien, Taiwan, R.O.C.
Phone: [phone]
Fax: [phone]

• Read the safety and
operatinginstructionsbefore
operating the apparatus.
•Retainsafetyandoperating
instructions for future
reference.
• Adhere to all warnings on
the apparatus and in the
operating instructions
manual.
• Follow all instructions for
operation and use.
•Thisapparatusconformsto:
CE,IEC60950,UL60950,CAN/
CSA C22.2 No. 60950 (cUL)
• FCC notice
This equipment has been
tested and found to comply
with the limits of a class A
digital device, pursuant to
Part 15 of the FCC rules.
Theselimitsaredesignedto
provide reasonable
protection against harmful
interference when the
equipment is operated in a
commercial environment.
This equipment generates,
uses and can radiate radio
frequency energy and, if not
installed and used in
accordance with the
instruction manual, may
cause harmful interference
to radio communications.
Operation of this equipment
in a residential area is likely
to cause harmful
interference in which case
the user will be required to
correct the interference at
his own expense.
Power connection
• Warning: This apparatus
must be earthed!
• Power requirements: The
apparatusmustbepowered
using the 12 VDC power
supply that is supplied with
the apparatus.
The 12 VDC power supply
must be powered by the AC
mains voltage.
•Donotoverloadwalloutlets
and extension cords as this
may result in fire or electric
shock.
•Mainsleadprotection(U.S.:
Power cord): Supply cords
shouldberoutedsothatthey
are not likely to be walked
upon or pinched by items
placeduponoragainstthem,
payingparticularattentionto
cords at plugs and
receptacles.
Water and moisture
• Never expose the
apparatustorainormoisture.
• Never use the apparatus
near water - e.g. near a
bathtub, washbasin,
swimmingpool,kitchensink,
laundry tub or in a wet
basement.
Ventilation
• Do not cover or block the
ventilation openings in the
cover of the set. When
installing the apparatus in a
cupboard or another closed
location,heedthenecessary
space between the set and
the sides of the cupboard.
Installation
• Place the apparatus on a
flat, solid and stable surface
thatcanbeartheweightofat
least 3 displays. If you use
an unstable cart or stand,
the set may fall, causing
serious injury to a child or
adult, and serious damage
to the equipment.
SAFETY INSTRUCTIONS

MFGD 3220D User's Guide 4

MFGD 3220D User's Guide 5
CONTENTS
1. Overview ......................................................................................................... 7
1.1 Introduction ............................................................................................... 7
1.2 Package contents ..................................................................................... 8
1.3 Controls and connectors........................................................................... 8
2. Installation ..................................................................................................... 10
2.1 Precautions............................................................................................. 10
2.2. Before installing the display ................................................................... 10
2.3 Portrait or landscape position ..................................................................11
2.4 Connecting the signals ........................................................................... 12
To connect the power: .............................................................................. 12
To connect the video & sync signals: ....................................................... 12
2.5. Routing the signal cables....................................................................... 13
2.6 Tilt and swivel positioning ....................................................................... 14
2.7 Starting up............................................................................................... 14
3. Controls......................................................................................................... 15
3.1 Stand-by switching.................................................................................. 15
3.2 Brightness control ................................................................................... 15
4. Maintenance.................................................................................................. 16
Panel ............................................................................................................ 16
Cabinet ......................................................................................................... 16
Removing dust from the rear of the glass panel ........................................... 16
5.Troubleshooting............................................................................................. 17
Pixel Faults ................................................................................................... 17
6. Technical specifications................................................................................. 18

MFGD 3220D User's Guide 6

MFGD 3220D User's Guide 7
1. OVERVIEW
1.1 Introduction
The MFGD 3220D, BARCO’s 21” 3 megapixel
greyscale LCD display, guarantees perfect image
quality in medical imaging applications.
The display combines a TFT (thin film transistor)
liquid crystal display panel structure and a built-in
backlight with inverter for a better picture quality. It
is designed to meet the users' needs for
performance, consistency, and outstanding image
quality through a streamlined development
process.
The display can be used in portrait or landscape
version, simply by turning the panel. The tilt &
swivel foot allows ideal positioning of the panel, in
height and viewing angle.
The image brightness can be adjusted by means
of a control wheel on the display. Other image
parameters can be adjusted by means of external
software, like MediCal® Pro.
I-Guard I-GUARD® is Barco’s patent-pending, built-in
calibration device, continuously maintaining image
quality. With I-GUARD®, QA checks no longer
need to disturb normal radiology activities, as they
can be performed while applications are running.
I-GUARD® allows radiologists or QA
administrators to calibrate their viewing stations or
adjust the panel’s curve to DICOM standards
without administrator intervention.
MediCal Pro In combination with Barco’s MediCal ®Pro
management and calibration software package,
Coronis offers a truly intervention-free display
system, making it possible to perform QA checks
from one central server at any time, thereby
reducing lifecycle cost.
Multi-scan capabilities The optimum and recommended resolution is
2048 x 1536 or 1536 x 2048 at 60 Hz.
The MFGD 3220D display will also display most
of the computer boot modes.
BARCO's BarcoMed 3MP2FH imaging board is
the best choice to drive the MFGD 3220D display.

MFGD 3220D User's Guide 8
1.2 Package contents
The package should include the following items,
please check. If some of the items are missing,
please contact the reseller you have purchased
the unit from.
- The MFGD 3220D display
- 12V DC power supply
- European power cord
- American power cord
- Video cable
- This user manual
1.3 Controls and connectors
(4) (5) (6)
(1)
(2)
(3)

MFGD 3220D User's Guide 9
(1) Power LED
- The LED is off when the display is off.
- The LED is green when the display is on.
Note: This function can be switched off by
software.
- The LED is blinking green when the
display is in Suspend power-saving mode.
- The LED is orange when the display is in
Stand-by power-saving mode.
(2) Control wheel for stand-by switching and
luminance control
(3) USB-downstream connector
(4) USB-upstream connector
(5) DVI (video and data) input
(6) 12V DC power input

MFGD 3220D User's Guide 10
• Keep your original packaging. It is designed
for this display and is the ideal protection
during transport.
• Avoid reflections in the flat panel to reduce
eye strain.
• Place the display on a strong and stable
table or desk.
• Keep the display away from heat sources
and provide enough ventilation in case it is
built in a rack or console.
• Make sure the computer is switched off
before connecting the signals.
• Do not block or cover the openings in the
external power supply block. Also, do not
turn the power supply upside down or at its
side. Doing so would cause overheating of
the power supply.
2.2. Before installing the display
Important:
In the factory, the height-positioning system in the
display foot is blocked with a strap to prevent
damage during transportation.
Before installing the display, you must remove this
strap.
To remove the strap:
1 Position the display with its rear side facing
you.
2 If the foot cover is mounted on the foot, lift
up the 2 clips of the foot cover to release the
cover from the foot.
3 Pull the lower side of the cover towards you
and simultaneously slide the cover
downward.
2.INSTALLATION
2.1 Precautions

MFGD 3220D User's Guide 11
4 Pull the red strap out of the fixation holes in
the foot.
You can better leave the cover off the foot while
connecting the signal cables to the display.
2.3 Portrait or landscape position
You can change the orientation of the panel at any
time, but it is more convenient to select
landscape or portrait orientation before
connecting the cables.
To change the panel orientation:
1 Stand at the front side of the panel and take
the panel at both sides.
2Very important: Tilt the panel before
changing the orientation.
Should you change the panel orientation
without tilting it first, you might irreversibly
damage the tilt & swivel mechanism.
3 To change from portrait to landscape, turn
the panel counterclockwise while lifting it
up slightly.
To change from landscape to portrait, turn
clockwise.