Barco RLM W8 User manual

USER’S GUIDE
User’s Guide
Please read this manual before using this projector
RLM W8

2
INDEX
Warning, Notices and Safety Instructions 4
Notice4
DescriptionpertainingtoFCCRulesPart15e:      4
WarningandSafetyInstructions       5
Noticesyoushouldreadpriortotheinstallationoftheprojector    7
Projector parts and functions 10
Frontview          10
Rearview          10
Bottomview          12
Rangeofeffectiveremotecontrolsignalreception     13
Installingbatteriesintheremotecontrol       13
Quick installation of the projector 14
Throwdistance         17
Modesofinstallation         17
Horizontalandverticallensshift       19
Installing the projector 20
Connectingtheprojectortootherdevices      20
12VTriggerconnection         20
RGBconnection         21
RGBsconnection         22
IRINPUTconnection         22
S-Video/Videoconnection        23
COMPONENTconnection        23
Turningontheprojector        24
ChangingOSDlanguage        24
Adjustingscreenorientation        25
Adjustingtheprojectorlens        26

3
Using the remote control 27
OSD Menu Tree 29
OSD Menu Description 31
INPUT          31
IMAGE33
LAYOUT          40
LAMP42
ALIGNMENT          44
CONTROL          50
SERVICE          53
Lamp and filter maintenance 54
Lampreplacement         54
Cleaningthelter         55
Simple troubleshooting and definition of the
LED indicators 57
Projector specifications 58

4
Notice
Pleasewritedownyourprojectormodelnumberandserialnumberandkeeptheinformation
formaintenancepurposesinthefuture.Shouldtheequipmentbelostorstolen,the
informationcouldalsobeusedforthepolicereport.
Modelnumber:
Serialnumber:
Pleasechecktheaccessoriesthatcomewiththeprojectorwiththefollowinglist.Shouldyou
ndanymissingaccessory,contactyourdealerimmediately.
1: USspecicationpowercord*1
2: EUspecicationpowercord*1
3: Chinaspecicationpowercord*1
4: Remotecontrol*1
5: AAbattery*2
6: User'sGuide*1
7: SetupManual*1
8: SafetyManual*1
9: WarrantyCard*1
10: WEEENoticationCard*1
11: CDROM*1
Description pertaining to FCC Rules Part 15e:
ThisdevicehasbeentestedandfoundtocomplywiththelimitsforaClassAdigitaldevice,
pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonable
protectionagainstharmfulinterferenceinaresidentialinstallation.
Thisequipmentgenerates,usesandcanradiateradiofrequencyenergy.Ifnotinstalled
andusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradio
ortelevisionreception.However,thereisnoguaranteethatinterferencewillnotoccurin
aparticularinstallation.Ifthisequipmentdoescauseinterferencetoradioortelevision
reception,whichcanbedeterminedbyturningtheequipmentoffandon,theuseris
encouragedtotrytocorrecttheinterferencebyoneorthefollowingmeasures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiver
isconnected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

ThisClassAdigitalapparatusmeetsallrequirementsoftheCanadianICES-003Standards.
CetappareilnumériquedelaclasseAestconformeàlanormeNMB-003duCanada.
Thelamp(s)inthisproductcontainmercury.Thisproductcouldcontainotherelectronic
wastesthatmightbehazardousifnothandledproperly.Pleaseconsultyourlocal/state/
federalregulationsregardingdisposalorrecycling.
Warning, Notices and Safety Instructions
1

5
Hg Formoreinformation,pleasecontactElectronicIndustriesAlliance(WWW.EIAE.
ORG).
 Forinformationonproperlamphandling,visitWWW.LAMPRECYCLE.ORG.
Warning and Safety Instructions
Special Care for Laser Beams!
SpecialcareshouldbeconsideredwhenDLPprojectorsandhighpowerlaserequipmentare
usedinthesameroomas.
DirectorindirecthitofalaserbeamontotheprojectorlenscanseverelydamagetheDigital
MirrorDevices(DMD™).
Sun light Warning
AvoidusingtheRLMW8indirectsunlight.
SunlightontheprojectorlenscanseverelydamagetheDigitalMirrorDevices(DMD™).
Never look into the projector light source directly
Thisequipmentcontainsahighbrightnesslightsourceandaportion
ofthelightemittedbytheprojectorisultravioletlight.Neverlookinto
theprojectorlightsourcedirectlyandpayspecialattentiontoprevent
childrenfromlookingintotheprojectorlightsourceasitcandamage
theireyes.

AVOID EYE CONTACT TO THE LIGHT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with an arrowhead within a triangle
is intended to tell the user that inside this product
may cause risk of electrical shock to persons.
The exclamation point within a triangle is intended to tell
the user that important operating and/or servicing instructions
are included in the technical documentation for this equipment.
CAUTION / TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
Do not turn off the projector by unplugging the power cord.
Undernormaloperations,besuretousetheSOFTPOWERbuttontoturnofftheprojectoras
theinternalcoolingfanswillremainworkingforapproximately90secondsaftertheprojector
hasbeenturnedofffortheshutdownproccesstobecompleted.Andassuch,avoidshutting
offACpowertoturnofftheprojectorsinceitcouldleadtolampmalfunctioningordamage.
Electric shock
Toprotectyourprojector,avoidturningontheprojectorduringlightningstormsandunplugit
fromthewalloutlet.Thiswillpreventsuddenelectricalsurgescausedbythelightningfrom
damagingtheprojector.
Warning, Notices and Safety Instructions 1

6
Do not overload wall outlets/extension cords
Payattentiontothecurrentloadoftheoutletyouareusing,beitwalloutletorextensioncord
outlettopreventreorelectricshock.
Cleaning
Whencleaningtheprojector,besuretounplugitfromthewalloutlettopreventelectric
shock.
Donotuseliquidoraerosolcleaners.Useadry/dampclothwithexcessivemoistureremoved
forcleaning.Besuretousecleaningclothdesignedtocleanmonitorsfortheprojectorto
preventdamagestotheprojectorcasingduetoabrasion.
Dampness, smoke, steam, dust, high temperature and direct
exposure to sunlight
Donotoperatetheprojectorinenvironmentswhereitcouldbeexposetodampness,smoke,
steam,dust,hightemperatureordirectsunlight.Forexample:bathroom,kitchen,adjacentto
washingmachine,dampbasementrooms,electricheatersorsimilarenvironments.Keeping
oroperatingtheprojectorintheabove-mentionedenvironmentcouldleadtodiscoloration,
moldformation,greaseordamagestotheprojector.
Ventilation
Theprojectorcaseisdesignedwithslotsandopeningstoremovetheheatinsidethe
projectorsothatitwillnotoverheatanddamagethecomponents.Besuretooperatethe
projectorinanenvironmentwithidealventilationanddon'toperateitonasofa,rugorother
closed-inenvironmentsthatcouldobstructventilation.
Intrusion of foreign objects
Besuretokeepallforeignobjectsawayfromenteringtheprojectorbecauseitcouldbe
exposedtohazardousvoltagesandcausepartstoshortcircuit.Thiscouldinturnleadtore
hazardorelectricshock.Examplesofforeignobjectsinclude:cockroach,screws,liquidand
soforth.
Inaddition,neverspillliquidintotheprojector.
Carrying the projector
Whenmovingtheprojectoronacart,besuretohandlethecartwithcare
asabruptstops,joltsofexcessiveforceorunevengroundcouldleadtheprojector
totopple.
Please install the projector on an even and stable surface
Avoidplacingtheprojectoronunstablecart,tripod,tableandsoforthtopreventtheprojector
fromfalling,becomingdamagedorcausinginjuries.
Servicing
Shouldyouencounterproblemwiththeprojector,pleaseseekassistancefromyourlocal
dealerorqualiedservicepersonnel.Donotattempttoservicetheprojectoryourselfsothat
youwouldnotbeexposedtohighvoltageorotherpotentialhazards.
Warning, Notices and Safety Instructions
1

7
Shouldyouencounteranyofthefollowingsituation,pleaseunplugyourprojectorfromthe
walloutletandcontactaqualiedservicepersonnelforassistance:
• Damagedpowercordorpowerplug.
• Ifaforeignobjecthasfallenintotheprojectororifyouhavespilledwaterorotherliquid
intotheprojector.
• Iftheprojectorhasbeendroppedaccidentallyordamaged.
• Ifyouexperiencenoticeablypoorperformanceormalfunctioningwiththeprojectordespite
havingfollowedinstructionsfornormaloperation.
Changing parts
Shouldanypartoftheprojectorbedamaged,checkwithyourservicingpersonnelthatonly
manufacturercertiedpartswereusedforreplacement.Usedofnon-certiedpartsmay
resultindamagestotheprojectororhazardssuchasreorelectricshock.Afterchanging
parts,besuretoremindtheservicingpersonneltoperformsafetyinspectionstoensurethat
theprojectoroperatesnormally.
Power cord
Don'tplacetheprojectorwherethecordcanbewalkedon.Thismayresultinfrayingor
damagetothepowercord,especiallyattheplugandthepointofconnectionbetweenthe
powercordandtheprojector.
Pleaseusethepowercordthatcomeswiththeprojectororthetypeofpowercordspecied
fortheprojector(refertothedescriptionsprintedonthepowercord).Ifyouarenotsureof
thepoweravailableattheregionyouarein,consultyourlocalpowercompanytoprevent
damagestotheprojectorduetotheuseofwrongpowercordorpotentialrehazardsdueto
currentoverload.
Dependingonthecountryandregionyouarein,thevoltageandtypeofsocketofthewall
outletmaybedifferentfromtheprojector.Ifyouareunabletotthepowerplugintothewall
outlet,contactyourlocaldealeranddonotremovetheextrapinonthepowerplugtoforcibly
tittothesocketattheriskofyourownsafety.
Notices you should read prior to the
installation of the projector
Safety issues related to the lamp
Thelampusedinthisprojectorcontainsmercury.Shouldthelampbebroken,pleasebe
carefulwhenhandlingtheglassshardsandkeepthesurroundingenvironmentwellventilated.
Besuretowearamaskthatoffersadequateprotectionbeforecleaninguptopreventinhaling
mercuryvaporthatcouldcausebodilyharm.Forinstructionsonlampreplacement,referto"
Page56:Lampreplacement".
Take frequent breaks to let your eyes rest
Prolongedviewingoftheprojectorscreencouldstrainyoureyes.Pleasebesuretorestyour
eyesadequately.
Installation environment for the projector
Youshouldavoidinstallingtheprojectoratplaceofexcessivedampness,dustorsmoke.If
installationinsuchenvironmentisunavoidable, be sure to have the interior of the projector
Warning, Notices and Safety Instructions 1

8
cleaned routinely to prolong the projector's lifecycle.Cleaningoftheprojector'sinterior
shouldonlybeperformedbyqualiedservicepersonneldispatchedbyyourlocaldealerand
youshouldnotattempttocleantheinsideoftheprojectorbyyourself.
Ifotherlightsourceisdirectlyprojectedontotheprojectorscreen,thecoloroftheimagefrom
theprojectorwillappeartobepaleandtheimagequalitywillbelower.Inaddition,youreyes
wouldbemorepronetofatigue.Therefore,itisrecommendedthattheprojectorbeinstalled
inplaceswithoutdirectexposuretosunlightorothersourcesofintenselight.
Theidealoperatingtemperaturerangefortheprojectorisbetween32°F~104°F(0°C~40°C)
Theidealstoragetemperaturerangefortheprojectorisbetween-4°F~104°F(0ºC~40°C)
Do not tilt the projector more than 15 degrees.
Themaximumtiltanglefortheprojectoris15degrees.
Whentheprojectoristiltedmorethan15degrees,itwillshortenthelifeoftheprojectorlamp
andmayleadtootherunpredictabledamages.
Can’t >15°
Can’t >15°
Congurations for projector operation at high altitudes
Whenoperatingtheprojectorathigheraltitudes,be sure to manually set the fan mode to
"High"oritcouldshortenthelifeoftheopticalsystemintheprojector.Highaltitudeisdened
asplacesbeing1500meters(4900feet)orhigher.
Pleasereferto"Page45:HighAltitudeMode".
Keep the projector's ventilation inlets and outlets free from obstructions
Besuretokeepobjectsfornolessthan30cmawayfromtheventilationinletsandoutletsofthe
projectorandnotethedirectionofairowatthedesignatedspotofinstallation.Donotletthe
hotairreleasedfromtheoutletowbacktotheinletasitwillpreventpropercoolingandleadto
damageoftheprojector'sinternalstructure.
Intheeventofhightemperatureduetomalfunctioningoftheinternalcoolingfancausedby
cloggingattheventilationinletsandoutlets,theprojectorwillactivateitsautomaticprotection
modeandshutdown.Whenthishappens,itdoesnotnecessarymeanthattheequipmentis
malfunctioning.Trytounplugthepowercordfromthewalloutletandwaitforapproximately15
minutesbeforeoperatingtheprojectoragain(remembertoremovetheobjectsthathavecaused
poorventilationsothattheprojectorwillnotgointotheprotectionmodeagain).Pleasereferto"
Page59:LEDSTATUS".
Description:Theregulationoftemperatureinsidetheprojectorbythecoolingfanisautomatic.And
assuch,thesoundofcoolingfanchangingitsoperatingspeeddoesnotimplythataproblemhas
occurredwiththeprojector.
Protect the projector with care
Whenplacingtheprojectoratahighposition,besuretosecuretheprojectorrmlysothat
itwouldnotfallandcauseinjuries.Takecaretoprotecttheprojector'slensfromcollision,
abrasionorotherdamages.Besuretoclosethelenscoverorcovertheprojectorwithadust
coverifyouneedtostoretheprojectororifitwillnotbeusedforanextendedtime.
Warning, Notices and Safety Instructions
1

9
Name and quantity of toxic/hazardous substances/elements
contained in the product
Warning, Notices and Safety Instructions 1

10
Front view
Lenscover
Lens
Infrared
receiver
Adjustablefoot
Adjusttheheightandangleofthe
projectorwiththeadjustablefoot
Adjustablefoot
Ventilationinlet
Theinternalcoolingfandraws
coolairfromtheventilationinlet
intotheprojector.
Rear view
Referto"Page59:LEDSTATUS".
fotthedetaildisplayinformation.
STBY
STAND BY
INPUT
ENTER
ERROR
MENU
ON
LED STATUS
INPUT
Usedtotogglebetweendifferentinput
signalsource
Referto"Page2:INDEX".formore
details
STAND BY
Theindicatorthatshowstheprojector's
standbystatus.
ERROR
Displaysthecauseofproblem(i.e.
temperature,fan,lamporsystem)
thathasledtoprojectormalfuncti
on.
▲▼
▼ ▲
bottons
Usethesebuttonstoscroll,
congureoradjustitemsonthe
OSDortogglebetweendifferent
images.
MENU
DisplaysorhidestheOSD
adjustmentscreen
POWER
Displaystheprojector'spower
status
ENTER
Pressthisbuttontoconrmselection
ofOSDitem;youcanchoosefrom
"SelectItem"oraccess"SubMenu"
congurations.
STBY
Usethisbuttontostartuporshutdown
theprojector.
Ventilation slot
Thehotairgenerated
insidetheprojectoris
dispersedthroughthe
ventilationslot.Make
suretheventilationslot
isfreefromobstruction.
Adjustable foot
Adjustable foot
Lamp cover
Infrared sensor
Power inlet
Projector buttons
Power switch
I→ON
O→OFF

Projector parts and functions
2

11
Projector parts and functions 2
RS-232
9-pinD-subsocket.ConnectsyourPCor
automatichometheater/controlsystem.
10/100 BASE-T
Connectstheprojectortoyour
PCvianetworktoenabledi-
rectcontroloftheprojectoron
yourPC.
HDMI 1 & 2
HDCPcompatibledigitalimageinput;
connectstosourcesusingHDMIorDVI.
SDI/HDSDI/3G
IN/OUT
Serialdigitalinterface,use
BNCconnectsinputoroutput
theimage.
12V TRIGGER
(3.5-mm,miniphonejack)
Offers12(+/-1.5)Vofoutputfor350mAmonitorrelaywith
shortcircuitprotection.
RGBHV/SOG
Standard15-pinVGAconnectionsockettoconnecttoRGB,
high-denitioncomponentinputorPC.Theprojectorwill
automaticallydetecttheresolutionoftheinputsignal.
IR ext.
ReceivesinputsignalfromcompatibleNilesorXantechIR
repeatersystems.
S-VIDEO
StandardS-VideoinputthatconnectstoDVDplayers,satellite
receiverorSuperVHS(S-VHS)VCR.
VIDEO
ConnectstoVCR,laserdiscplayersorother
componentimagesources.Alsoconnectstothe
compositeimagesynchronizedinputfromRGBSinput
source.
YUV1
Standardandhighdenition(480i/480p/
576i/576p/720p/1080i/1080p)component
input,connectstoDVD/HD-DVD/BDplayer,
HDset-top-boxorotherSD/HDinputsource.
AlsoconnectstoRGBinputfromRGBSinput
source.
RGBHV/YUV2
ConnectstotheveBNCinputsfor
component(YPbPr)imagesourceand
channel(Hs,Vs)source.
IO Control
(Input/Input control panel)
S-VIDEO VIDEO YUV 1
RGB-S
RS-232
12V TRIGGER
IR ext.I II
350mA
RGBHV / YUV 2
G/Y B/Pb R/Pr H VRGB-HV/SOG
HDMI  HDMI 
IN OUT
10/100 BASE-T
SDI / HDSDI / 3G

12
Bottom view
250
8
309
147.50
157.50
263.20
25.50
Set weight
center line
Set
weight
center
line
152.50
500
532 45.80
631
CeilingMountOrderInfo:
1.R9849999-Ceilingmount
2.R9841260-ShortPulley400mmto765mm
3.R9841261-LongPulley800mmto1165mm
Adjustable foot
Adjusttheheightandangleoftheprojector
withtheadjustablefoot
Mounting bracket screw hole
Thesescrewholesareusedtomounttheprojector
toitsdesignatedmountingbracketusing3M8x15
screwsand3M8x40bolts.Thedimensionsofthe
screwholesareshownintheimagebelow.
M8x40
3bolts
M8x15
3screws
Projector parts and functions
2

13
Range of effective remote control signal
reception
Thediagrambelowillustratestherangeofeffectiveremotecontrolsignalreception.
40°
40°
12m
12m
 Note:Avoidplacingtheremotecontrolatplacesofhightemperatureorhumidityasitcouldcausethe
remotecontroltomalfunction.
Installing batteries in the remote control
Removethecoverby
slidingitinthedirection
indicatedbythearrow.
InserttwonewAA
batteries
(observethepolarity).
Replacethecover.

Note1:Besuretoinsertthebatteriesinthecorrespondingorientationstomatchthepolarities.
Note2:Donotmixnewbatterieswithusedbatteriesasitwouldshortenthelifeofnewbatteriesorcause
leakage.
Note3:OnlyusedAAbatteriesasinstructed;donotattempttoinsertdifferenttypesofbatteriesintotheremote
control.
Note4:Iftheremoteisgoingtobeunusedforlongperiodsoftime,besuretoremovethebatteriestoprevent
leakage,whichcoulddamagetheremotecontrol.
Note5:Theliquidcontentsinthebatteriesisharmfultotheskin;donottouchtheleakagewithyourbarehands
directly.Wheninstallingfreshbatteries,besuretocleanuptheleakagethoroughly.
Note6:Undermostcircumstances,youonlyneedtopointtheremotecontroltowardsthescreenandtheIR
signalwouldbereectedoffthescreenandpickedupbytheIRsensorontheprojector.Butunderspecic
circumstances,theprojectormayfailtoreceivesignalsfromtheremotecontrolduetoenvironmental
factors.Whenthishappens,orienttheremotecontrolattheprojectorandtryagain.
Note7:Iftherangeofeffectiveremotecontrolsignalreceptiondecreasesoriftheremotecontrolstopsworking,
replacethebatteries.
Note8:Iftheinfraredreceiverisexposedtouorescentlamporstrongsunlight,theremotecontrolmaynot
operatenormally.
Note9:Refertotheregulationsenforcedbyyourlocalgovernmentonthedisposalofusedbatteries;improper
disposalcoulddamagetheenvironment.
Projector parts and functions 2

14
Quick installation of the projector.
1. Orient the projector towards the screen

Screen
2. Connect the power cord to the projector

S-VIDEO VIDEO YUV 1
RGB-S
RS-232
12V TRIGGER
IR ext.I II
350mA
RGBHV / YUV 2
G/Y B/Pb R/Pr H VRGB-HV/SOG
HDMI 
AC MAINS
100-240 Volts
50/60Hz
AC POWER SWITCH

Desk Top or Notebook
桌上型或是筆記型電腦
連接至牆壁插座
3. Connect the projector to your PC and ip the switch to “I” to
turn on the power.

S-VIDEO VIDEO YUV 1
RGB-S
RS-232
12V TRIGGER
IR ext.I II
350mA
RGBHV / YUV 2
G/Y B/Pb R/Pr H VRGB-HV/SOG
HDMI 
AC MAINS
100-240 Volts
50/60Hz
AC POWER SWITCH

Desk Top or Notebook
桌上型或是筆記型電腦
連接至牆壁插座

S-VIDEO VIDEO YUV 1
RGB-S
RS-232
12V TRIGGER
IR ext.I II
350mA
RGBHV / YUV 2
G/Y B/Pb R/Pr H VRGB-HV/SOG
HDMI 
AC MAINS
100-240 Volts
50/60Hz
AC POWER SWITCH

Desk Top or Notebook
桌上型或是筆記型電腦
連接至牆壁插座
4. Remove the lens cover on the projector before starting it up.

Pressthe STBY buttononthe
projectororthe
l
buttononthe
remotecontroltostartuptheprojector.
3Quick installation of the projector

15
5. Adjusting the projector's angle
a.Pleaseusetheadjustablefeettochangetheangleoftheprojectorinordertoachieve
themostsuitableangleforprojectiononthescreen.
  
b.Adjustingthelensbyhorizontalandverticallensshift
 Method1:PresstheENTERbuttonontheremotecontroltoaccessLensControl
adjustmentscreenbeforepressingENTERonceagaintoaccessthe
menuandusethe▼▲
▼ ▲
buttonstoadjustthehorizontalorvertical
positionofthelens.
PressENTERonceto
adjustzoomandfocus
PressENTERonceto
adjustzoomandfocuswith
crossline
PressENTERonceto
AdjustLinesshiftwith
crossline

Enter
Enter

Enter

Enter
PressENTERagain
toadjustverticaland
horizontallensshift
  
 Method2:PresstheMENUbuttonontheremotecontrolandchooseAlignment
LensControl;thenusethe▼▲
▲ ▼
buttonstoadjustthehorizontalor
verticalpositionofthelens.
6.Adjusting focus and zoom.
a. PresstheMENUbuttonontheremotecontrolandchooseAlignmentLens
Control;thenusethe
▼ ▲
buttonstoadjustthelens'focus(clarity).

3
Quick installation of the projector

16
b. PresstheMENUbuttonontheremotecontrolandchooseAlignmentLens
Control;thenusethe▼▲buttonstoadjustthesizeoftheimagethatisprojected
ontothescreen.

Originalimagesize Zoomout Zoomin


7. Correcting keystoning caused by projection angle
a. Toadjusthorizontalkeystoning,presstheMENUbuttonontheremotecontroland
chooseALIGNMENTWarphorizontalKeystoneandusethebuttonsto
▲ ▼
adjust the image.

b. To adjust vertical keystoning, presstheMENUbuttonontheremotecontroland
chooseALIGNMENTWarpVerticalKeystoneandusethe▼▲ buttons to
adjust the image.

8. Turning off the projector
Pressthe STBY buttonontheprojectororthe buttonontheremotecontrolat
least3secondstoturnofftheprojector.Whentheprojectorhasbeenturnedoff,thecooling
fanwillremaininoperationforapproximately90seconds.
3Quick installation of the projector

17
Throw distance
ThrowDistance(TD)=ScreenWidth(W)xThrowRatio(TR)

Screen Width (W)
Throw Distance (TD)
Coupledwiththeavailableprojectionlenses,theprojectoroffersthefollowingthrowratios:
• R9832740-RLDLens(0.77:1)
• R9832741-RLDLens(1.16:1)
• R9832742-RLDLens(1.45-1.74:1)
• R9832743-RLDLens(1.74-2.17:1)
• R9832744-RLDLens(2.17-2.90:1)
• R9832745-RLDLens(2.90-4.34:1)
• R9832746-RLDLens(4.34-6.76:1)
Note:
Projectionlensesareoptional
accessories.Pleasecontactyour
localdealertoacquiretheprojection
lensthatsuitsyourneedmost.
Modes of installation
• Installtheprojectorinanenvironmentbelow35°C(95°F).Theprojectorshouldbekept
clearfromsourcesofheatand/orventilationopeningsofairconditioner.
• Theprojectorshouldbekeptawayfromdevicesthatemitelectromagneticenergy,such
asmotorandtransformer.Commondevicesthatemitelectromagneticenergyinclude
slideshowsystem,speakers,powerampliersandelevators.
• Ifyouchoosetoinstalltheprojectorontheceiling,besuretousetheceilinginstallation
componentsmanufacturedbymanufacturer-certiedvendors.Fordetails,pleasecontact
yourlocaldealer.
Frontal projection - desktop installaion
Advantages:easytoinstallcanbeeasily
movedoradjustedeasyto
operate.
Disadvantage:occupiesoorspaceandlimits
seatingcapacity. 
Installing the projector 4

18
Frontal projection - ceiling mode
Advantage:doesnotoccupyoorspace
doesnotdrawattentiontoit.
Eliminatesthepossibilitythat
someonewouldaccidentally
movetheprojector.
Disadvantage:stricterinstallation
requirementsandconditions;
careshouldbetakenduring
theinstallationtoensure
theprojectorhasbeen
securelymounted.
operationoftheprojector
becomesinconvenientwithout
theremotecontrol.
Rear projection - desktop
installaion
Advantage:theprojectoriscompletely
hiddenfromplainview
theprojectorcanbeeasily
operatedthissetupusually
offersbetterreductionof
ambientnoise.
Disadvantage:requiresanadditionalroom
forinstallationrelatively
highercostsforinstallation.
Rear projection - ceiling installation
Advantage:theprojectoriscompletely
hiddenfromplainviewthissetup
usuallyoffersbetterreductionof
ambientnoise.
Disadvantage:requiresanadditionalroomfor
installation.Stricterinstallation
requirementsandconditions;
careshouldbetakenduring
theinstallationtoensurethe
projectorhasbeensecurely
mounted.operationofthe
projectorbecomesinconvenient
withouttheremotecontrol.
Rear projection - submersive
installation
Ifyouwishtohavearearprojectionsetup
withlimitedspacetotherearoftheprojector,
youcanuseamirrortoreectthelight
path.However,boththeprojectorandthe
mirrorhavetobepreciselylocated.Ifyouare
consideringsuchinstallation,pleasecontact
yourdealerforassistance.
Advantage:theprojectoriscompletely
hiddenfromplainview
thissetupusuallyoffersbetter
reductionofambientnoise.
Disadvantage:requiresanadditionalroom
forinstallationrelatively
highercostsforinstallation.
Screen
Mirror
Installing the projector
4

19
Horizontal and vertical lens shift
Inadditiontousingtheadjustablefeettoadjustprojectionangle,youcanalsousetheLens
Shiftfunctiontoadjusttheprojectedimage.
Moving the lens vertically
Thedistanceofverticallensmovementis100%ofhalfthescreenheightinbothdirections.
Forinstance,ifyouareusinga80"×50"screen,youwillbeabletomovetheimageupwards
ordownwardsbynomorethan25"(0.635m).

Range of vertical
lens shift adjustment
Range of vertical
lens shift
adjustment
Thisillustrationshowsnormal
verticallensshiftwithoutthe
useofspecialspecicationlens
orprojector.
 
Moving the lens horizontally
Thedistanceofhorizontallensmovementis30%ofhalfthescreenwidthinbothdirections.
Forinstance,ifyouareusinga80"×50"screen,youwillbeabletomovetheimageleftor
rightbynomorethan12"(0.305m).
Range of
horizontal
lens shift
adjustment
Range of
horizontal
lens shift
adjustment
Thisillustrationshowsnormal
horizontallensshiftwithoutthe
useofspecialspecicationlens
orprojector.
Note:whenthelensisinthe
neutralposition(i.e.without
horizontalorverticalshift),
thecenteroftheprojection
shouldbealignedwiththe
centerofthescreen.
Installing the projector 4

20
Connecting the projector to other devices
HDMI / DVI connection
SignalsfromimagesourceofferthebestprojectionimagequalitywhensentthroughHDMI.
Therefore,trytouseinputdeviceswithHDMIoutputasthesourceofimage.
 
S-VIDEO VIDEO YUV 1
RGB-S
RS-232
12V TRIGGER
IR ext.I II
350mA
RGBHV / YUV 2
G/Y B/Pb R/Pr H VRGB-HV/SOG
HDMI  HDMI 
HDMI/DVI input source
(BD/HD-DVD/DVD player, HD set-top-box,
gaming consoles and so forth)

12V Trigger connection
Ifyourhometheatresystemincludesaprojectorscreen,screencoverorother12VTrigger
equipment,
pleaseconnectsuchdevice/equipmenttotheprojector’s12VTriggeroutputasillustrated.
Afteryouhavedoneso,
Yourscreenwilllowerautomaticallywheneveryouturnonyourprojectorforyour
convenience.
 
S-VIDEO VIDEO YUV 1
RGB-S
RS-232
12V TRIGGER
IR ext.I II
350mA
RGBHV / YUV 2
G/Y B/Pb R/Pr H V
RGB-HV/SOG
HDMI  HDMI 
Tip = +12V
Sleeve = Ground
Retractable screen or other
12V device
Installing the projector
4