Barton 90139 Original instruction manual

OWNER’S MANUAL AND SAFETY INSTRUCTIONS
Outdoor Wicker Float Towel Valet
ITEM # 90139
SAVE THIS MANUAL. KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATION, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S
SERIAL NUMBER ON THE BACK OF THE MANUAL, OR THE MONTH AND YEAR OF PURCHASE IF
PRODUCT HAS NO SERIAL NUMBER
FOR QUESTIONS, PLEASE CALL CUSTOMER SERVICE: 909.628.0880

Long Side Panel
A
PART LIST
2 PCS
BCDE
F
#1 #2 #3 #4
#1#2 #3
HARDWARE LIST
Short Side Panel
2 PCS
Bottom Panel
1 PC
Long Post
4 PCS
Shelf
1 PC
Top Frame
1 PC
28 PCS
Allen Key
1 PC
Short Bolt
8 PCS
M6*15mm M6*38mm M6mm
GHIJ
Rib
4 PCS
Hub
1 PC
Connector
4 PCS
Finial
1 PC
K
Locking Caster
2 PCS
M
Top Cover
1 PC
EXTRA HARDWARE LIST
Washer
36 PCS
M6mm
L
Swivel Caster
2 PCS
Long Bolt
3 PCS
Short Bolt
2 PCS
M6*15mm M6*38mm
Washer
3 PCS
M6mm
Long Bolt
N
Fabric Curtain
1 PC
2

Step 1. Attach long side panels (part A) to long posts (part D) using the
long bolts (part #2), washers (part #3) and allen key (part
#4).Attach swivel casters (part L) and locking casters (part K) to
long posts (part D).
NOTE: Please do not fully tighten bolts until unit is fully
assembled.
#2 X8
X8
#3
#2X4
X4
#3
Step 2. Attach short side panels (part B) to long side panels (part A) of
assembled parts (part A,D,L&K) using long bolts (part #2),
washers (part #3) and allen key (part #4).
#3
#2
#4
#3
#2
#4
D
D
K
L
A
A
#2
#3
#4
B
D
B
A
3

D
C
#2#3
#4
Step 3. Attach assembled parts (part A,D,L&K) to short side panels
(part B) of assembled parts (part A,B,D,L&K) using long bolts
(part #2), washers (part #3) and allen key (part #4).
#2X4
X4
#3
Step 4. Attach bottom panel (part C) to short side panels (part B)
of assembled parts (part A,B,D,L&K) using long bolts (part
#2), washers (part #3) and allen key (part #4).
#2X4
X4
#3
B
A
#3
#2
#4
D
A
B
4

E
D
Step 5. Attach shelf (part E) to long posts (part D) of assembled parts
(part A,B,C,D,L&K) using long bolts (part #2), washers (part #3)
and allen key (part #4).
#2X4
X4
#3
#3 #2 #4
Step 6. Attach top frame (part F) to long posts (part D) of assembled
parts (part A,B,C,D,E,L&K) using long bolts (part #2),
washers (part #3) and allen key (part #4).
D
F#3#2 #4
#2X4
X4
#3
5

Step 7. Attach connectors (part I) to top frame (part F) of assembled
parts (part A,B,C,D,E,F,L&K) using short bolts (part #1),
washers (part #3) and allen key (part #4).
F
I
G
H
Step 8. Fully insert ribs (part G) into the hub (part H) until spring clips
click into place.
#3 #1
#4
#1X4
X4
#3
6

#1 X4
X4
#3
Step 10. Attach assembled parts (part G,H,J&M) to connectors (part I)
of assembled parts (part A,B,C,D,E,F,I,L&K) using short bolts
(part #1), washers (part #3) and allen key (part #4).
NOTE: Please fully tighten all bolts at this time.
Step 9.
M
#3
#1
#4
Unfold top top cover (part M) and attach to assembled parts
(part G&H) as shown below. Attach finial to hub (part H) of
assembled parts (part G,H&M) to secure together.
7

N
Step 11. Secure fabric curtains (part N) to top frame (part F) of the
completed unit with Velcro ® straps as shown.
Step 12. NOTE: Curtains (part N) can be held open by using the
Velcro ® straps to secure them to long posts (part D) of the
completed unit as shown below.
N
N
F
Velcro ®
Velcro ®
D
D
8

OF NOTE
9
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES
ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT
PARTS THERETO.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only and are not available
individually as replacement parts.
MADE IN CHINA
DISCLAIMER
6
6
6