Bartscher IW 35 PRO User manual

IW 35 PRO / 105832
V
4/0915

- 19 -
ENGLISH
Translation
of the original instruction manual
Table of contents
1.Safety ........................................................................................................................ 20
1.1 Safety instructions................................................................................................ 20
1.2 Key to symbols..................................................................................................... 22
1.3 Hazard sources.................................................................................................... 23
1.4 Intended use......................................................................................................... 25
2. General information................................................................................................ 26
2.1 Liability and Warrantees....................................................................................... 26
2.2 Copyright protection ............................................................................................. 26
2.3 Declaration of conformity...................................................................................... 26
3. Transport, packaging and storage......................................................................... 27
3.1 Delivery check...................................................................................................... 27
3.2 Packaging............................................................................................................. 27
3.3 Storage................................................................................................................. 27
4. Technical data......................................................................................................... 28
4.1 Technical data...................................................................................................... 28
4.2 Overview of parts ................................................................................................. 28
5. Installation............................................................................................................... 30
5.1 Positioning............................................................................................................ 30
5.2 Electric connection ............................................................................................... 30
6. Operation................................................................................................................. 31
6.1 Functionality of induction cookers ........................................................................ 31
5.3 Appropriate cookware........................................................................................... 31
6.3 Operation instructions........................................................................................... 32
7. Cleaning................................................................................................................... 34
8. Possible Malfunctions ............................................................................................ 35
9. Waste disposal........................................................................................................ 36
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: [phone]
Germany fax: [phone]
GB/UK

- 20 -
Read these instructions before using and keep
them available at all times!
This instruction manual contains information about the installation, operation and
maintenance of the device and should be consulted as an important source of
information and reference guide.
Awareness of the safety instructions and instructions for use in this manual will ensure
the safe and correct use of the device.
In addition to the information given here, you should comply with any local Health and
safety Controls and generally applicable safety regulations.
The instruction manual forms part of the product and should be kept near the device
and easily accessible for anyone carrying out the installation, servicing, maintenance or
cleaning.
Please keep these instructions and give them to future owners of the device.
1.Safety
This device is designed in accordance with the presently applicable technological
standards. However, the device can pose a danger if handled improperly and
inappropriately.
All persons using the device must follow the recommendations and instructions in this
manual.
1.1 Safety instructions
• This device may only be operated in technically proper and safe
condition.
• The device can be used by children 8 years and up, as well as by
people with disabilities and those with limited experience/knowledge
as long as they are under supervision or have been instructed on
proper use of the device and its possible dangers.
• Children should not play with the device.
• Cleaning and maintenance cannot be performed by children
younger than 8 years old and must be done under supervision.
• Children under the age of 8 years old must be kept away from
the device and its power cord.

- 21 -
•
Only a qualified technician and using original spare parts and
accessories should carry out repairs and maintenance of the device.
• Do not use any accessory or spare parts that have not been
recommended by the manufacturer. These can be dangerous for the
user or lead to damages of the device or personal injury, and further,
the warranty expires.
• To prevent hazards and to ensure optimum efficiency, no
modifications or alterations to the device that are not explicitly
approved by the manufacturer may be undertaken.
• Never allow the power cable to come into contact with heat sources or
sharp edges. The power cable should not hang over the side of the
working surface. Ensure that no one can step on or trip over the cable.
• The power cable must not be folded, bent or tangled, and must always
remain fully unrolled.
• Never place the device or other objects on the power cable.
• Do not lay the cable over carpets or heat insulations. Do not cover
the cable. Keep away the cable from operating range and do not
dunk it into water.
• Inspect the power cable regularly for damage. Never use the device
if the cable is damaged. If the power cable is damaged, have an
authorised service center or qualified electrician replace it.
• The device is not designed for use with an external timer or remote
control.
• Do not move the induction cooker during the cooking process and
with hot cooking pots.
• Never leave the device unattended when in use.
• Only use the device indoors.

- 22 -
1.2 Key to symbols
In this manual, symbols are used to highlight important safety instructions and any
advice relating to the device. The instructions should be followed very carefully to avoid
any risk of accident, personal injury or material damage.
DANGER!
This symbol highlights hazards which could lead to injury.
WARNING!
This symbol highlights dangerous situations which could lead to injury or death.
WARNING! Hot surface!
This symbol is a warning that the device surface is hot when in use.
Ignoring this warning may result in burns!
CAUTION!
This symbol highlights dangerous situations which could lead to light
injuries, or damage, malfunction, and/or destruction of the device.
CAUTION! Magnetic field!
This symbol informs that the magnetic fields occurring during the device
operation may cause interference.
NOTE!
This symbol highlights recommendations and information aimed for effective
and trouble-free device operation.

- 23 -
1.3 Hazard sources
DANGER! Electric shock hazard!
To avoid the hazard results please follow the instructions below.
Do not use the machine in case of incorrect operation, damages or dropping on
the floor.
In any case do not open the device housing. In case of electrical or mechanical
modifications the electric shock hazard will occur.
Do not place any objects like wire or nails in the vantilation slots (air inlet and outlet).
Never immerse the device and plug in water or other liquids.
Never carry or lift the device by the supply cable.
Never operate the device with moist hands or standing on wet floor.
Remove the plug from its socket:
-when the device is not used,
-in case of anomalies during operation,
-before cleaning.
DANGER! Suffocation hazard!
To avoid the hazard results please follow the instructions below.
Prevent access of children to the package materials like plastic bags
and foamed polystyrene elements.
WARNING! HOT SURFACE! Burn hazard!
To avoid the hazard results please follow the instructions below.
During the operation the cooking surface becomes very hot.
Keep in mind, that the induction cooker itself does not produce any heat during
cooking. However, the heat from the pan will leave the cooking surface hot!
After use the surface is hot. Do not touch!
Do not place any metal kitchen utensils, pot covers, frying pans, knives, or other metal
objects on the cooking field. After the device activation they may become very hot.

- 24 -
Keep in mind that the objects like rings, watches, etc. may become hot in the vicinity
of the cooking surface.
Do avoid overheating do not place the aliminium foil or metal plates on the surface
of the device.
WARNING! Fire hazard!
To avoid the hazard results please follow the instructions below.
Avoid prolonged heating of oils and fats! The overheated oil or fat may quickly
ignite. In case of ignition on the cooking field deactivate the device and cover the
flame with large pot cover, plate, or moistened cloth.
Never use water for extinguishing!
After covering the flame wait for the cooking pots to cool down and assure
appropriate amount of fresh air.
WARNING! Explosion hazard!
To avoid the hazard results please follow the instructions below.
Do not place any flammable plastic containers or acidic and basic materials near
the device as it may limit its life and cause deflagration during the activation.
Do not heat closed containers, e.g. canned food, on the induction cooking field.
The containers or cans may explode (crack) due to overpressure. Open the can
and place it in the pot with some water heated on the cooking field.
CAUTION! Electromagnetic field hazard!
To avoid the hazard results please follow the instructions below.
The magnetic objects, like credic cards, data storage devices, or calculators, must not
be placed in the direct vicinity of the operating device. Their operation may be
disturbed by the magnetic field.
Do not open the lower cover!
Make sure that the cooking pots are placed in the centre of the work field to cover the
electromagnetic field in the best possible range.
The scientific research confirm that the induction cookers are not dangerous.
But persons with the artificial pacemakers should keep the distance of min. 60 cm
from the operating device.

- 25 -
CAUTION!
In order to avoid any damages of the device follow the instructions below.
Do not use any sharp objects or abrasive agents for cleaning the surfaces.
The device should not be used as a shelf or for storage of empty kitchenware.
The cooking surface is made from glass resistant to high temperature. In case of
damages or small cracks disconnect the device from the power supply immediately
and contact the service.
1 .4 Intended use
Safe operation is only guaranteed when using the device for its intended purpose.
The device is not suitable for continuous commercial use.
Any technical interventions, as well as assembly and maintenance are to be made by a
qualified customer service only.
The device is intended for home use or in similar places such as:
→ in kitchens for store or office employees or in other service locations;
→ in suburban properties;
→ for the customers in hotels, motels, and similar places;
→ in Bed & Breakfasts.
The induction wok is intended only for heating and cooking food using appropriate
cookware.
Do not use the induction wok for:
-heating and cooking liquids or substances that are flammable,
dangerous, volatile, etc.
CAUTION!
Any use going beyond the intended purpose and/or any different use
of the device is forbidden and is not considered as conventional.
Any claims against the manufacturer or his authorized representative as
a consequence of experiencing damages resulting from unconventional
use are impossible.
The operator is liable for all damages resulting from inappropriate use.

- 26 -
2. General information
2.1 Liability and Warrantees
All the information and instructions in this manual take into account standard safety
regulations, current levels of technical engineering as well as the expertise and
experience we have developed over the years.
The instruction manual was translated with all due care and attention. However, we do
not accept liability for any translation errors. The German version of this instruction
manual is definitive.
If the delivery consists of a special model, the actual scope of delivery may differ from
the descriptions and illustrations in this manual. This is also the case for special orders
or when the device has been modified in line with new technology.
CAUTION!
Read this manual carefully and thoroughly before any operation
of the device, and especially before turning it on!
Manufacturer is not liable for any damages or faults caused by:
-violation of advice concerning operation and cleaning;
-use other than designed;
-alterations made by user;
-use of inadequate spare parts.
We reserve the right to make technical changes for purposes of developing and improving
the useful properties.
2.2 Copyright protection
The instruction manual including any texts, drawings, images or other illustrations is
copyright. No part of this publication may be reproduced, transmitted or used in any
form or by any means without permission in writing from the manufacturer. Any person
who commits any unauthorized act in relation to this publication shall be liable to claims
for damages. All rights reserved.
NOTE!
The contents, texts, drawings, pictures and any other illustrations are
copyright and subject to other protection rights. Any person unlawfully
using this publication is liable to criminal prosecution.
2.3 Declaration of conformity
The device complies with the current standards and directives of the EU.
We certify this in the EC declaration of conformity. If required we will be
glad to send you the according declaration of conformity.

- 27 -
3. Transport, packaging and storage
3.1 Delivery check
Please check the delivery upon completeness and transport damage immediately
after receipt. In case of visible damage do not accept or accept the delivery with
reservation only.
Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint.
Hidden damages should be reclaimed immediately after notice, as claims for damages
can only be asserted within the effective period for complaints.
3.2 Packaging
Please do not throw away the covering carton of your device as it might be useful for
storage purposes, when moving or, in case of damages, when the device must be sent
back to a repair center. The outer and inner packing material should be removed
completely from the device before installation.
NOTE!
If you liked to dispose the packing, consider the regulations applicable in
your country. Supply re-usable packing materials to the recycling.
Please inspect the device upon completeness. In case any part is missing please
contact our customer service center immediately.
3.3 Storage
Keep the package closed until installation and under consideration of the outside
indicated positioning- and storage markings.
Packages should be stored under consideration of the following:
-Do not store outdoors.
-Keep it dry and dust-free.
-Do not expose it to aggressive media.
-Do not expose it to direct sunlight.
-Avoid mechanical shocks and vibration.
-In case of longer storage (> 3 months) make sure you check
the state of the packaging and the parts regularly.
If required refresh or renew.

- 28 -
4. Technical data
4.1 Technical data
Name Induction wok IW 35 PRO
Code-no.:
105832
Version Housing: stainless steel,
Heating surface: Schott Ceramic, Ø 300 mm
Power levels: 10 (400 – 3500 W)
Temperature range: 60 °C to 240 °C
Time setting range 5 – 120 minutes
Power: 3.5 kW / 230 V 50 Hz
Dimensions: W 355 x D 439 x H167 mm
Weight: 7.5 kg
We reserve the right to make technical changes!
4.2 Overview of parts
Dirt and grease filter
The induction cooker is equipped with a dirt and
grease filter, located at the bottom of the unit.
The filter prevents dirt and grease from getting
inside the casing with air taken in by the ventilator.
The filter can be washed in a dishwasher.
Feet Control panel
Heating surface
Housing

- 29 -
Touch control panel with digital display
1
Digital display
2
Down button : use to reduce cooking time,
temperature and power level
3
Up button : use to increase cooking time,
temperature and power level
4
Time setting button
5
Temperature levels button
6
Power levels button
7
LED STANDBY light
8
ON / STANDBY button
9
LED time control indicator
10
LED temperature indicator
11
LED power indicator
8
1
11
10
9
3
2 4 5 6
7

- 30 -
5. Installation
5.1 Positioning
•Before the operation unpack the device and remove all package material.
CAUTION!
Never remove the rating plate and any warning signs from the device.
•Place the device on top of an even, stable, dry, and water-resistant surface which
supports the weight of the device and is not heat sensitive.
•Never place the device on a flammable surface.
•Do not place the device near an open flame, electric oven or other source of heat.
•Do not block or cover the ventilation ducts that allow for air to circulate around the
device. Doing so may lead to overheating of the device.
•Keep a distance of at least 5 – 10 cm from flammable walls and other objects.
•Do not place the induction plate near other equipment and objects sensitive to
magnetic fields (e.g. radio, television, etc.).
•Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.
5.2 Electric connection
WARNING! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared
with that of the device (see type label). Connect the device only in case of
compliance!
The device must only be connected to a properly installed single socket
with protective contact.
•The electrical circuit of the socket must be secured to at least 16A. Only connect
the device to a wall outlet; do not use any extension cords or power strips.

- 31 -
6. Operation
6.1 Functionality of induction cookers
With induction cooker, an electric voltage is applied on a conductor spool beneath the
glass. This creates magnetic fields, which directly heat up the bottom of the cookware
through a physical effect.
This means saving time and energy, because contrary to common hotplates, the
cookware is heated up, not the heating element and the glass.
Due to the technical characteristics described above, another advantage is the very
short start-up cooking time.
In addition, the heat supply promptly adapts to changed settings and can be controlled in
small steps. The induction cooker reacts to changed settings just as fast as a gas stove,
as the energy reaches the pot immediately without having to heat up other materials first.
The induction technology combines this fast reaction with the basic advantage of
electricity, meaning being able to exactly adjust the heat supply.
Additional advantages of an induction cooker:
•As the cooking zone is only heated up indirectly via the bottom of the cookware,
over spilling food cannot stick. The glass cooking zone is only heated up by the
hot cookware.
•If the device is turned on and no dish for cooking is present or is removed, a repeating
audio signal will sound and the device will turn itself off after approx. 30 seconds.
•The device will detect if the appropriate cookware is placed on the heating plate.
If the cookware is not appropriate for induction hotplates, energy will not flow.
The device will turn off after approx. 30 seconds.
•When operating the cooking zone with empty cookware, a temperature sensor turns
it off automatically.
5.3 Appropriate cookware
Use only round woks made of steel, stainless steel or another material intended for
induction heating (follow the cookware manufacturer's instructions).
NOTE!
For proper functioning, the wok should have a magnetic bottom
(the magnet must be fixed permanently).

- 32 -
e.g. wok from
Bartscher
•
stainless steel
•cold handles
•capacity: 5 liters
•dimensions: ∅380 mm, height: 100 mm
(with cover: 235 mm)
•stainless steel cover included
Art. no. 105831
If a non-magnetized wok is applied, it may result in a loss of power and reduce
protection from overheating. This is why aluminum, bronze or non-metallic
cookware must not be used.
6.3 Operation instructions
•Before the device operation clean it according to the instructions in section
7 „Cleaning “.
•Connect the unit to a grounded single outlet.
•A signal will be heard and the LED STANDBY indicator will come on. The unit is in
standby mode.
•Place an appropriate wok with food on the heating surface.
•If the heating field temperature is below 50 °C, the digital display will read „-L-“
and when over 50 °C - „-H-“.
•To turn the unit on, press ON / STANDBY .
The indicators on the digital display will go off, and the LED indicator for standby
mode will begin flashing.
•The power and temperature LED indicators will come on. The unit is ready for
selecting a function.
NOTE!
If no settings are entered within 30 seconds of activation using the button
marked , the unit will automatically return to standby mode.
NOTE!
To stew or parboil food (max. temperature 170 °C) s elect one of the power
levels (1-10).
To bake or fry food in grease (max. temperature 240 °C) choose one of the
temperature levels (60 °C - 240 °C).

- 33 -
1. Power setting
Press the button one time.
The digital display will show the factory setting of „5“, and the unit will come on.
The STANDBY indicator will remain on.
Use the buttons or to change the settings for (400 – 3500 W).
Level 1 equals 400 W, and level 10 - 3500 W of power.
The digital display will show the selected power level, and the LED
indicator will light up.
2. Temperature regulation
Press the button once.
The preset temperature level „120 °C“ will show on the digital display.
With the button buttons or you can change at any time the setting in the
range of 60 – 240°C.
(Temperature levels: 60, 80, 100, 120, 140, 160, 180, 200, 220 and 240 °C).
The digital display will show the selected temperature level, and the LED
indicator will come on.
The unit will heat the food, then maintain the set temperature. Power regulation is
performed automatically.
NOTE!
If the unit is turned on without cookware, or cookware is removed while the unit
is in use. an alarm will sound and the unit will shut off after approx. 30 seconds.
Minute timer
After the operation mode is selected (power level or temperature level), press the
button. The digital display will read „0“ and the LED time setting button will light up.
Use the buttons or to set the working time at 5-minute intervals (max. 120 minutes).
Cooking time is counted in minutes, and the digital display will revert to the previous value
shown (power or temperature level).

- 34 -
When the time has elapsed, an alarm will sound and the unit will enter standby mode.
NOTE!
The time setting can be changed while the minute timer is in use by the
buttons or . The power and temperature settings will not be altered.
Likewise, you can change the power level or temperature range without
changing the time.
NOTE!
If the time has not been set, the device automatically switches off
after 120 minutes.
CAUTION!
Never place cookware without food to be heated.
Heating an empty pot or pan will activate overheating protection, an
alarm will sound, and the unit will turn off.
The digital display will show error message „E05“.
Disconnect the unit from its socket and leave to cool for several minutes.
The unit will continue functioning without problems.
•Ensure the heating surface does not get scratched, although scratches should not
impact the unit's functioning.
•When cooking or heating is finished, disconnect the device from the socket
(pull the plug!)
7. Cleaning
CAUTION!
Disconnect the unit from the power supply (unplug!) before cleaning.
The unit is not designed to be rinsed with running water.
Do not use a pressure washer to clean the device!
Be careful and do not let the water into the unit.
oClean the unit regularly.
oClean the heating surface, housing and control panel with a moist cloth and soft
cleaning agent.

- 35 -
oClean the dust and grease filter regularly with a mild cleaning agent or in the
dishwasher. Remove the filter (see 4.2 Dust and grease filter). After cleaning,
replace the fully-dried filter back in the unit.
CAUTION!
To avoid injuries and damage, do not reconnect the unit or activate it
without the filter.
oEnsure the rear ventilation ducts are free from dust and dirt, and clean them regularly
using a brush or compressed air.
oNever use cleaning substances containing petroleum, distillates, etc. to avoid
damaging the unit's surface.
oUse only soft cloths, never use any cleaning materials that could scratch the surface.
oUse a soft, dry cloth to wipe and polish the unit's surface.
oIf the unit is to remain unused for a longer time, store it in a dry, clean place safe from
frost and sunlight, inaccessible to children. Do not place heavy objects on the unit.
8. Possible Malfunctions
Error
message Cause Solution
E01
•Momentary low voltage
(<160 V). •Remove the device from the socket
(pull the plug!). After a few minutes,
reconnect the device to the socket.
E02
•Momentary high voltage
(> 270 V). •Remove the device from the socket
(pull the plug!). After a few minutes,
reconnect the device to the socket.
E03
•The device becomes too
hot (e.g. due to blocked
ventilation slots).
•Parts are damaged (e.g.
transistor).
•Clear/unblock ventilation slots.
Leave the device for a few minutes
to cool. The device is ready for use
again. If the error message after
cooling the device still appears on
the display, contact the
salesperson.
•Contact the salesperson.

- 36 -
Error
message Cause Solution
E05
•The overheating protection
turns on in the power
module (> 150 °C).
The device turns off.
•Remove the cookware from the
cooking surface. Leave the device
for a few minutes to cool. The
device is ready for use again.
E06
•The temperature sensor is
damaged or has a short. •Contact the salesperson.
E07
•The overheating protection
turns on in the power
module (> 240 °C).
The device turns off.
•Remove the cookware from the
cooking surface. Leave the device
for a few minutes to cool.
The device is ready for use again.
E08
•Damaged temperature
sensor. •Contact the salesperson.
9. Waste disposal
Discarding old devices
At the end of its service life the discarded device has to be disposed in accordance with
the national regulations. It is advisable to contact a company which is specialized in
waste disposal, or just contact the local disposal service in your community.
WARNING!
To exclude any abuse and the dangers involved make the waste device unfit
for use before disposal. For that purpose disconnect device from mains
supply and remove mains connection cable from the device.
CAUTION!
For the disposal of the device please consider
and act according to the national and local rules
and regulations.
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: [phone]
Germany fax: [phone]