Bason T86-(RGB) i06 User manual

BASON T86-(RGB)i06IRLEDControllerUserManual   1 / 7
T86-(RGB) i06
IR LED Controller User Manual
Please read carefully before using this controller.

BASON T86-(RGB)i06IRLEDControllerUserManual   2 / 7
zInstructions
Thanks for using T86-(RGB) i06 controller of our company. Before installation, please read this
manual carefully to ensure fully understand and proper use in order to avoid unnecessary damages to
the controller.
Before using, please check to confirm whether there is any damage caused during the transport
process, if there is, please notify your supplier and do not use the product.
zAfter-sale services
Warranty of this product is one year, in this period we guarantee repairing or replacement service
with no charge if it is normally used according to the instruction.
If the customer does not follow the instructions and following provisions in this manual, which results
in product damage, the supplier is not responsible for any problems arising and defects, even in the
warranty period, maintenance costs borne by the customer.
1. Damage caused by misuse, such as not in accordance with the instructions.
2. Damages caused by unauthorized removal, repair, modify of the circuit; incorrect connection and
replacement of the chips.
3. Damage caused by transportation, shock, falling after purchase.
4. Damage caused by earthquake, fire, flood, lighting and abnormal voltage.
5. Damage caused by negligence or improper maintenance, such as storage at high temperature and
humid environment, vicinity of hazardous chemical substances.
6. Replacement of products.
zInstructions for safety
Making sure you use the product perfectly and safely, please observe the instructions and warning
on this manual.
Attention! Operate cautiously and read these instructions carefully.
1. For installation, try to avoid the minefields, strong magnetic field and high-pressure area.
2. Ensure that the wire is connected correctly and firmly in order to avoid short-circuit damage to parts
and posing a fire hazard.
3. Please install controller in a well-ventilated place to ensure that the ambient temperature is moderate.
4. Before using this product, please check the DC power and voltage meet the product technical
requirements; positive and negative polarity is defined consistent to the product.
5. Prohibit live wiring, check to confirm wiring is correct, if no short-circuit, then power!
6. If any problems do not make unauthorized repairs. Any doubts please contact your local supplier.
This manual applies only to this product of our company, subject to changes without notice.

BASON T86-(RGB)i06IRLEDControllerUserManual   3 / 7
zIntroduction
T86-(RGB)i06 Series controller is a smart RGB three colors light controller dedicated to LED light
long-illumination with the adoption of the most advanced PWM(Pulse Width Modulation) digital control
technology. The controller can be operated through IR wireless remote controller. It is available to
commercial use and can be installed invisibly. The installation of LED controller can meet the light
requirements of commercial or family lighting at different times and different circumstances, extend the
LED life span, and save energy; LED and RGB lights can use this controller to decolorize
1. Technology specifications
Type T86-(RGB)i06
Input power DC12V
Output signal RGB three channels signal
Max load current 12A(3*4A)
Output power 144W(12V)
Controller dimension L86*W86* H35 (mm)
Remote dimension L86*W40*H7(mm)
Packaging dimension L152*W96*H53(mm)
Gross weight 207g
2. Functions
(1).RGB full colors LED strip controller.
(2).Control way: Key-press control (IR remote control is optional), it is available in 10-meter (no barriers).
(3).Display mode: 7 static, 3 colors jump change, 7 colors jump change, 3 colors gradual change, 7
colors gradual change.
(4).Speed of dynamic and brightness of static can be adjusted.
(5).Power-off memory.
(6).Of functions of both controller and dimmer.
(7).Standby function.
(8). Colored control panel.
(9).Silver shell.
(10).3 channels RGB signal (common anode/cathode selectable).

BASON T86-(RGB)i06IRLEDControllerUserManual   4 / 7
3. Structure
(1).View of major controller：（chart 1）
(2).View of remote controller:（chart 2）

BASON T86-(RGB)i06IRLEDControllerUserManual   5 / 7
4. Connection diagram of controller
(1).Connection diagram to low power LED: （chart 3）
(2). Descriptions for remote and panel keys.(Table 1)
Symbol Name Function
OFF/ON On/off: turn on or off the LED controller.
MODE Press this key can change LED mode.
BRT+/BRT-
:increase/decrease brightness，totally 256-level
brightness，press and hold can change brightness
continuously.
SPEED+/SPEED-
: Increase/decrease LED speed, press and hold can
increase or decrease speed continuously.

BASON T86-(RGB)i06IRLEDControllerUserManual   6 / 7
5. Failure analysis and solutions (Table 2)
Failure Analysis Solutions
No light
1. No power.
2. Reversed the polarity.
3. Wrong connection or poor
contact.
4. LED light has been bad.
1.Check the power
2. Make sure the polarity is right.
3. Re-check wire connection.
4. Replacement of new led light;
Brightness of
LED is not
consistent
1. Input wire is too long to cause
wire loss.
2. Diameter of wire is too thin to
cause wire loss.
3. Power overload.
4. Controller overload.
1. Shorten wire or use loop circuit.
2. Calculate current, and then
replace thick wire.
3. Replace larger power.
4.Add a power amplifier
Tips: The effective power is generally only 80% of the marked power, so it is recommended in
selecting the power supply, the user choose a slightly larger one than the LED load power, at least for
more than 20%!
Appendix: dynamic mode description（Table 3）.
Mode Description
Mode 1-7 Static: red, green, blue, yellow, cyan, purple, white.
Mode 8 3 colors jump change: red→green→blue
Mode 9
7 colors jump change:
red→green→blue→yellow→cyan→purple→white
Mode 10 3 colors gradual change: red→green→blue

BASON T86-(RGB)i06IRLEDControllerUserManual   7 / 7
6. Packaging
(1).Packaging details (chart 4).
(2).Packaging list (Table 4).
Symbol Name Picture
External
dimension（mm）QTY Unit
A
T86-(RGB)
Controller
86*86*35(mm) 1 PCS
B i06(remote) 86*40*7（mm）1 PCS
C Manual 86E0RGB A6 sheet 1 PCS
(3). Carton packaging
Box packing: 20PCS/carton