Bassett INSPIRED BP-RSWD44-W12 User manual

IF PARTS ARE MISSING OR DAMAGED, DO NOT RETURN TO STORE
To order missing or replacement parts, contact us via e-mail parts@officestar.net, by Fax [phone], or toll free parts
number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
Item# BP-RSWD44-W12
ROSALIND WRITING DESK
ASSEMBLY INSTRUCTIONS

LIMITED WARRANTY
INSPIRED by Bassett®Warrants, to the original purchaser its products to be free from defects in material and workmanship for a period of
5 years. Defects and damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event
beyond the control of INSPIRED by Bassett®is not covered. The warranty does not cover cosmetic damage that may result from normal
use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. This
warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
To make a warranty claim, contact Customer Service, provide model number, sales receipt and description of the problem. It is the
customer’s responsibility to prepay freight on any components returned to the factory. INSPIRED by Bassett®will pay return freight on
components covered under terms of warranty.
WARNING
1. Do not use this product unless all screws and bolts are securely tightened.
2. Check that all screws and bolts are tight every three months or as needed.
3. Dispose of packing material properly. Do not use plastic cover as head covering. It may cause suffocation.
4. Do not use this product as a stepladder.
5. Use this product for its intended purpose only.
6. Intended for residential use only.
Contact us via e-mail parts@officestar.net, by Fax [phone], or toll free parts number 1-800-950-7262, Monday through
Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
Warning
This unit is intended for use only with the maximum weights indicated.
Use with products heavier than maximum weights indicated my result
in instability causing damage or injury.
!
Maximum Load Weight:
Box Drawer:
40 lbs. / 18.1 kgs.
Maximum Load Weight:
Top Surface:
135 lbs. / 61.3 kgs.

PARTS LIST

THANK YOU for purchasing this quality product. Be sure to check all packing material carefully for small parts which may have come loose
inside the carton during shipment. Identify and count all parts and compare with the parts and hardware lists.
Contact us via e-mail parts@officestar.net, by Fax [phone], or toll free parts number 1-800-950-7262, Monday through
Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
HARDWARE LIST

STEP 2:
Insert four Wood Dowels (A) into holes in Desk Top (1). Attach Left Side Frame (2) and Right Side Frame (3) to Desk Top (1) using eight Bolts (B), eight
Spring Washers (D) and eight Flat Washers (E). FULLY TIGHTEN BOLTS (B) USING WRENCH (F).
STEP 1:
Place Desk Top (1) face down on a flat, non-marring surface. Carefully pull drawer out of Desk Top (1) by pulling up on drawer slide lever on one side
and pressing down on lever on other side.

STEP 3:
Attach Bottom Metal Rail (5) to rear of Left Side Frame (2) and Right Side Frame (3) using two Bolts (C), two Spring Washers (D) and two Flat Washers
(E). FULLY TIGHTEN BOLTS (C) USING WRENCH (F).
STEP 4:
Attach Cross Rod (4) to rear of assembly using four Bolts (C), four Spring Washers (D) and four Flat Washers (E). FULLY TIGHTEN BOLTS (C) USING
WRENCH (F).

STEP 5:
Carefully turn desk to the upright position and slide drawer into desk.
IMPORTANT: MAKE SURE ALL BOLTS ARE SECURELY TIGHTENED BEFORE USING THIS PRODUCT.

FURNITURE CARE:
- Dust with a soft cloth following the grain pattern of the wood.
- Dust often to remove the everyday abrasive particles from the wood surfaces.
- Before dusting, moisten cloth lightly with a spray product.
- Wood finishes also benefit from an occasional polishing.
Contact us via e-mail parts@officestar.net, by Fax [phone], or toll free parts number 1-800-950-7262, Monday through
Friday 8:00 a.m. - 5:00 p.m. Pacific Time.