Bauhn HE214015 User manual

6 Outlet Energy Saving Power Board
Model Number: HE214015
After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
INSTRUCTION MANUAL

Description goes here
The product is guaranteed to be free from defectsin workmanship and parts for a period
of 12 months from
the date of purchase. Defectsthat occur within this warranty period,
under normal use and care, will be repaired, replaced or refunded
at our discretion. The
benefits conferred by this warrantyare in addition to all rights and remediesin respect of
the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goodscome with guarantees that cannot be excluded under the Australian
Consumer Law.You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage.You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and
the failure doesnot amount to a major failure.
6 Outlet Energy Saving Power Board
Warranty Details
The product is guaranteed to be free from defects in workmanship and
parts for a period of 12 months from the date of purchase. Defects that
occur within this warranty period, under normal use and care, will be
repaired, replaced or refunded at our discretion. The benets conferred
by this warranty are in addition to all rights and remedies in respect of the
product that the consumer has under the Competition and Consumer Act
2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for
a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.

3
After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
Contents
Warranty 2
Contents 3
Welcome 4
General Safety Instructions 5
Product Features 6
Parts List / Technical Specications 7
Installation 8
Product Operation 9
FAQ’S 10
Repair and Refurbished Goods or Parts Notice 11

4After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
Congratulations on choosing to buy a BAUHN® product. By doing so you
now have the assurance and peace of mind that comes with purchasing a
product made by one of the leading manufacturers. All products brought to
you by BAUHN® are manufactured to the highest standards of performance
and safety and, as part of our philosophy of customer service and
satisfaction, are backed by our comprehensive 1 Year Warranty. We hope
you will enjoy using your purchase for many years to come.
Welcome

5
After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
Read this manual thoroughly before rst use and keep it in a safe place for
future reference, along with the warranty card, purchase receipt and carton.
The safety precautions enclosed herein reduce the risk of re, electric shock
and injury when correctly adhered to. Follow all instructions and take notice of
all warnings to reduce the risk of re or electric shock.
• Do not expose this product to water, rain, moisture or dust. Electronic
products of this kind should never be subjected to moisture or extreme
temperatures.
• Do not attempt to open the product housing.
There are no user-serviceable parts inside this product.
• Do not repair the unit yourself. If your device is not functioning correctly,
disconnect the product from power, and contact after sales support.
• Supervise young children to ensure they do not play with the product.
• Do not expose to chemicals, oils or other liquids.
• Do not expose to naked ames or other heat sources.
• Do not drop or subject the device to undue shock.
• Keep device away from magnets at all times.
• Keep away from direct sunlight. Indoor use only.
• Unplug this device during lightning storms or when unused for long
periods of time.
General Safety Instructions

6After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
Product Features
• 6 outlets, with 4 energy saving Auto ON/OFF outlets.
• 4 Auto ON/OFF energy saving outlets will automatically switch on or off
when the Master device is switched on or off.
• 1 outlet which is always on, ideal for your PVR recorder, Wireless Router,
Cordless Telephone or any other device that requires constant power.
• Fully automatic operation, set and forget.
• 350J surge protection to protect against power surges.
• 10A overload protection.
• 1.1m cable length.
1 x Always On
outlet
4 x AUTO
ON/OFF outlets
1 x Master
outlet
AUTO ON/OFF
status LED
Surge Protected
status LED
Reset Switch

7
After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
Technical Specications
Voltage: 240V AC
Frequency: 50Hz
Max load current: 10A
Total load must not exceed 2400W
Switching threshold: 10W
Working temperature: 0-50°C
Parts List
• 6 Outlet Energy Saving Power Board
• Getting Started Guide
• Warranty Card
• Warranty Stickers
• Instruction Manual

8After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
Installation
The BAUHN Energy Saving Power Board can be connected to a range of
devices around the home. Common uses include home theatre systems and
desktop computers and their accessories.
1. Plug your main device into the outlet marked MASTER, for example TV
or computer
2. Plug your secondary devices into the outlets marked AUTO ON / OFF,
for example home theatre amps, subwoofer, game systems, computer
speakers or printers
3. If you have a device which requires constant power, plug this into the
outlet marked ‘ALWAYS ON’. Common uses include PVRs, wireless
routers or telephones
4. Plug the energy saving power board into a wall outlet and switch the
outlet on
WARNING: Some computer and AV equipment must be returned
to standby mode before the power can be turned off to avoid data
loss or other damage. This power board will turn power off before
the device is set to standby. To conrm you will need to refer to the
manufacturer’s instructions for each device.
Cordless
Telephone
Video Game
Console
Home Theatre Television
Set Top
Box
DVD
Player
Example – Using the energy saving power board for your AV equipment

9
After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
Example – Using the energy saving power board in your home ofce
Product Operation
The BAUHN Energy Saving Power Board requires no additional operation,
save your electricity automatically by switching off the Auto ON/OFF outlets
when the system is not in use. Once the Energy Saving Power Board has
been installed with your devices, simply follow the below instructions.
1. Switch on your MASTER device, TV or computer in the examples shown
2. Devices connected to the AUTO ON/OFF outlets will receive power
within 5 seconds. Use your connected devices as normal
Tip: Your connected devices may need to be switched to “on”
using their associated remote control or power switch
3. When you have nished using your devices switch off the MASTER
device (TV or computer)
4. Devices connected to the AUTO ON/OFF outlets will have power cut
within 30 seconds
Wireless Router
Speakers Printer Computer
Scanner Monitor

10 After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
Frequently Asked Questions
Question Answer
My connected devices won’t switch on. Check you have turned on the MASTER
device rst otherwise the AUTO ON/OFF
devices will not power on.
Check the MASTER device draws more
than 10W, and has been switched on
before attempting to operate any devices
connected to the AUTO ON/OFF outlets.
My device won’t automatically switch
off.
Check that it is plugged into an outlet
marked AUTO ON/OFF. Wait for about 30
seconds after switching off your control
device to see if the power is automatically
cut.
Everything connected to my power
board is not receiving power.
The overload may have tripped for your
safety. Disconnect all connected devices
and remove the power board from the
wall outlet. Press the black Reset button
down until it clicks. Reconnect the power
board, following the instructions. Make
sure that you do not draw more than
2400W though the power board.
My wireless router or PVR recorder or
telephone keeps turning off.
Devices that require constant power such
as routers, PVR’s and telephones should
be plugged into the ALWAYS ON socket.
If they are plugged into AUTO ON/OFF
they will automatically turn off when the
MASTER device is turned off.

Description goes here
The product is guaranteed to be free from defectsin workmanship and parts for a period
of 12 months from
the date of purchase. Defectsthat occur within this warranty period,
under normal use and care, will be repaired, replaced or refunded
at our discretion. The
benefits conferred by this warrantyare in addition to all rights and remediesin respect of
the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goodscome with guarantees that cannot be excluded under the Australian
Consumer Law.You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage.You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and
the failure doesnot amount to a major failure.
6 Outlet Energy Saving Power Board