Baumalight CF372 User manual

Brush Cutt CF360, CF372, CF560 and
CF572
OPERATOR’S MANUAL
Issue Date: September 2018

TABLE OF CONTENTS
1 INTRODUCTION ��������������������������������������������������������������������������������������������������������������������������������� 1
1�1 Overview�������������������������������������������������������������������������������������������������������������������������������������� 1
1�2 Intended Use And Foreseeable Misuse������������������������������������������������������������������������������������ 1
2 SAFETY������������������������������������������������������������������������������������������������������������������������������������������������ 2
2�1 Safety Alert Symbol And Safety Words������������������������������������������������������������������������������������ 2
2�2 Operational Hazards������������������������������������������������������������������������������������������������������������������� 3
Prepare For Emergencies ���������������������������������������������������������������������������������������������������������� 3
Replace Safety Signs ����������������������������������������������������������������������������������������������������������������� 3
Do Not Allow Riders ������������������������������������������������������������������������������������������������������������������� 3
Lower Operating Speed ������������������������������������������������������������������������������������������������������������� 4
Avoid Rollover ���������������������������������������������������������������������������������������������������������������������������� 4
Avoid Powerlines & Underground Utilities ������������������������������������������������������������������������������ 4
Detach Safely ������������������������������������������������������������������������������������������������������������������������������ 4
Hazards From Modifying Equipment ���������������������������������������������������������������������������������������� 5
2�3 Maintenance Hazards����������������������������������������������������������������������������������������������������������������� 6
Maintenance�������������������������������������������������������������������������������������������������������������������������������� 6
3 SAFETY SIGNS����������������������������������������������������������������������������������������������������������������������������������� 7
4 OPERATION �������������������������������������������������������������������������������������������������������������������������������������� 10
4�1 Preparation For Use ����������������������������������������������������������������������������������������������������������������� 10
4�2 Removing Skids Or Blocks������������������������������������������������������������������������������������������������������ 10
4�3 Machine Components ���������������������������������������������������������������������������������������������������������������11
4�4 Attaching/Detaching������������������������������������������������������������������������������������������������������������������11
4�5 Field Operation ������������������������������������������������������������������������������������������������������������������������� 12
4�6 First Time User Tips ����������������������������������������������������������������������������������������������������������������� 12
5 SERVICE AND MAINTENANCE������������������������������������������������������������������������������������������������������ 13
5�1 Replace Blades ������������������������������������������������������������������������������������������������������������������������� 13
5�2 Replace Spider�������������������������������������������������������������������������������������������������������������������������� 13
5�3 Inspections�������������������������������������������������������������������������������������������������������������������������������� 14
6 TROUBLESHOOTING ���������������������������������������������������������������������������������������������������������������������� 15
7 WARRANTY��������������������������������������������������������������������������������������������������������������������������������������� 16
ii

1 INTRODUCTION
Congratulations on your choice of a Baumalight
Skid Steer Brush Cutt to complement your brush
cutting operation. This equipment has been
designed and manufactured to meet the needs of
a discriminating buyer for efcient brush cutting.
Models CF360 and CF560 have two blades and
can cut a path 60 inches wide. Models CF372 and
CF572 have four blades and can cut a path 72
inches wide. The unique blade design reduces the
brush to mulch. Controlling the Brush Cutt is done
completely from the cab of the skid steer providing
the ability for precise control and all day operator
comfort.
Safe, efcient and trouble free operation of your
Brush Cutt requires that you and anyone else
who will be operating or maintaining the Brush
Cutt, read and understand the Safety, Operation,
Maintenance and Troubleshooting information
contained within the Operator’s Manual.
This manual covers the Baumalight Skid Steer
Brush Cutt, models CF360, CF372, CF560 and
CF572. Use the Table of Contents as a guide to
locate required information.
Keep this manual handy for frequent reference
and to pass on to new operators or owners. Call
your Baumalight dealer, distributor or the factory
if you need assistance, information or additional
copies of the manuals.
OPERATOR ORIENTATION - The directions left,
right, front and rear, as mentioned throughout this
manual, are as seen from the skid steer driver’s
seat and facing in the direction of travel.
The brush cutter is designed to be used by
experienced operators, trained in the safe
operation of a skid steer and trained in the hazards
related to using the brush cutter and the safe use
of the cutter for the intended purpose. Operators
will require personal protective equipment to
reduce the risk from some hazards that cannot be
completely eliminated or controlled by the design
of the tool.
Care is required to ensure that the brush cutter
tool will not come across metallic objects, stones
or other materials.
Brush Cutt tools are not designed for use in
hazardous atmospheres where there is a risk
of re or explosion due to ammable gases or
vapors. Use in hazardous, explosive atmospheres
is prohibited.
Serious injury or death of the operator or bystanders
may be caused if the tool is misused. Misuse may
also cause damage to the machine carrying the
implement.
1.2 Intended Use And
Foreseeable Misuse
1.1 Overview
1

2 SAFETY
You must read, understand and follow the
instructions given by the operating unit
manufacturers, as well as the instructions in this
manual.
The safety information in this manual is denoted by
the safety alert symbol:
^
This symbol means ATTENTION! BECOME
ALERT! YOUR SAFETY IS INVOLVED!
The level of risk is indicated by the following signal
words:
^ DANGER
DANGER - Indicates a hazardous
situation, which, if not avoided, WILL
result in death or serious injury�
^ WARNING
WARNING - Indicates a hazardous
situation, which, if not avoided, could
result in death or serious injury�
^ CAUTION
CAUTION - Indicates a hazardous
situation, which, if not avoided, could
result in minor or moderate injury�
NOTICE
NOTICE - Indicates a situation that could
result in damage to the equipment or
other property�
2.1 Safety Alert Symbol
And Safety Words
2

^ WARNING
Use brush cutter only for the designed
applications�
Any other use may result in personal
injury, damage to equipment and may
void the warranty�
^ WARNING
Prevent serious injury or death�
Verify brush cutter is attached to
excavator before operation or transport�
^ WARNING
Protect from ying debris.
Wear proper safety glasses, goggles,
or a face shield to protect from ying
debris�
Carefully read all safety messages in this manual
and on equipment safety signs. Keep safety signs
in good condition and replace missing or damaged
safety signs.
New equipment components and repair parts must
include the current safety decal.
Learn how to properly operate equipment.
NEVER operate or work around this equipment
without proper instruction, while fatigued or under
the inuence of alcohol, prescription or non-
prescription medication or if feeling ill.
Keep your equipment in proper working condition.
Know the regulations and laws that apply to you
and your industry. This manual is not to replace
any regulations or laws. Additional information
may be found at: www.asae.org or www.osha.gov.
If you do not understand any part of this manual,
contact Baumalight at 866-820-7603.
Prepare For Emergencies
• Be prepared in case of emergencies.
• Keep a re extinguisher and rst aid kit close
to the machine.
• Keep emergency phone numbers close to your
phone.
• Know your address so emergency services
can locate you if an emergency arises.
Replace Safety Signs
• Replace missing or damaged safety signs.
• Safety signs are identied in Section 3 of this
manual.
• Replacement safety signs are available from
your Baumalight dealer.
Do Not Allow Riders
• NEVER lift or carry anyone with brush cutter.
• NEVER use brush cutter as a work platform.
• NEVER allow passengers on brush cutter.
2.2 Operational Hazards
3
This manual suits for next models
3
Table of contents
Other Baumalight Tractor Accessories manuals