Bush Hog BS1 Series User manual

© 2020 Alamo Group Inc. $0.00
BS1
BS2
Published 09/20 Part No. 50075568
OPERATOR’S MANUAL
BUSH HOG®
2501 Griffin Ave.
Selma, AL 36703
334-874-2700
www.bushhog.com
SERIES BALE SPEAR
This Operator's Manual is an integral part of the safe operation of this machine and must
be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety
and Operation Instructions contained in this manual before operating the equipment. C01-
Cover

To the Owner/Operator/Dealer
All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded
operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has
designed this implement to be used with all its safety equipment properly attached to minimize the chance of
accidents.
BEFORE YOU START!! Read the safety messages on the implement and shown in your manual. Observe the
rules of safety and common sense!
WARRANTY INFORMATION:
Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration
Form in full and return it to within 30 Days. Make certain the Serial Number of the Machine is recorded on the
Warranty Card and on the Warranty Form that you retain.

TABLE OF CONTENTS
SAFETY SECTION .............................................................................................................. 1-1
General Safety Instructions and Practices ......................................................................................................... 1-2
Operator Safety Instructions and Practices ....................................................................................................... 1-4
Equipment Operation Safety Instructions and Practices .................................................................................... 1-5
Connecting or Disconnecting Implement Safety Instructions and Practices .................................................... 1-10
Maintenance and Service Safety Instructions and Practices ........................................................................... 1-11
Storage and Parking Safety Instructions and Practices ................................................................................... 1-13
Concluding Safety Instructions and Practices .................................................................................................. 1-13
Decal Location ................................................................................................................................................. 1-14
INTRODUCTION SECTION ................................................................................................. 2-1
ASSEMBLY SECTION ........................................................................................................ 3-1
ASSEMBLY ........................................................................................................................................................ 3-2
OPERATION SECTION ....................................................................................................... 4-1
Standard Equipment and Specifications ............................................................................................................ 4-3
OPERATOR REQUIREMENTS ......................................................................................................................... 4-3
SKID STEER & TRACTOR HOOK-UP .............................................................................................................. 4-4
Hook-Up with Euro Style Hitch ........................................................................................................................... 4-4
John Deere 300-500 Hitch Style ........................................................................................................................ 4-5
Hook-Up - Skid Steer Style Hitch ....................................................................................................................... 4-5
BALE SPEAR OPERATION .............................................................................................................................. 4-6
Picking up a Bale ............................................................................................................................................... 4-6
Traveling with a Load ......................................................................................................................................... 4-7
IMPLEMENT STORAGE ................................................................................................................................... 4-8
MAINTENANCE SECTION .................................................................................................. 5-1
Proper Torque For Fasteners ............................................................................................................................ 5-2

Safety Section 1-1
SAFETY SECTION

SAFETY
BS1-BS2 09/20 Safety Section 1-2
©2020Alamo Group Inc.
General Safety Instructions and Practices
A careful operator is the best operator. Safety is of primary importance to the manufacturer and should be to
the owner/operator. Most accidents can be avoided by being aware of your equipment, your surroundings, and
observing certain precautions. The first section of this manual includes a list of Safety Messages that, if
followed, will help protect the operator and bystanders from injury or death. Read and understand these Safety
Messages before assembling, operating or servicing this Implement. This equipment should only be operated
by those persons who have read the manual, who are responsible and trained, and who know how to do so
responsibly.
The Safety Alert Symbol combined with a Signal Word, as seen below, is used throughout this
manual and on decals which are attached to the equipment. The Safety Alert Symbol means:
“ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!” The Symbol and Signal Word
are intended to warn the owner/operator of impending hazards and the degree of possible injury
faced when operating this equipment.
Indicates an imminently hazardous situation that, if not avoided, WILL result in DEATH OR
VERY SERIOUS INJURY.
Indicates an imminently hazardous situation that, if not avoided, COULD result in DEATH
OR SERIOUS INJURY.
Indicates an imminently hazardous situation that, if not avoided, MAY result in MINOR
INJURY.
Identifies special instructions or procedures that, if not strictly observed, could result in
damage to, or destruction of the machine, attachments or the environment.
NOTE: Identifies points of particular interest for more efficient and convenient operation or repair.(SG-1)
Practice all usual and customary safe working precautions and above all---remember safety is
up to YOU. Only YOU can prevent serious injury or death from unsafe practices.
Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las
medidas de seguridad. (SG-3)
Operate this Equipment only with a Tractor equipped with an approved roll-
over-protective system (ROPS). Always wear seat belts. Serious injury or even
death could result from falling off the tractor, particularly during a turnover when
the operator could be pinned under the ROPS. (SG-7)