Baxton Studio BBT 8054-SF User manual

ASSEMBLY INSTRUCTIONS
MODEL : BBT 8054 - SF
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
STEP 1 STEP 2
1 OF 2
HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBB Bolt M8 x 45mm 8 PCS
2 M8 FLAT WASHER 8 PCS
3 M8 SPRING WASHER 8 PCS
4M5 ALLEN KEY (BALL SHAPE) 1 PC
PART LIST
ITEM DESCRIPTION QTY
ACHAIR 1 PC
BLEG FRONT 2 PCS
CLEG BACK 2 PCS
1.1 Open the zip at the bottom of cushion seat and take out leg.
B
C
TOP VIEW
TOP VIEW
B
C
A

ASSEMBLY INSTRUCTIONS
STEP 3 STEP 4
2 OF 2
B
C
B
C
A
BACK
FRONT
2
3
1
4
FRONT
BACK

ASSEMBLY INSTRUCTIONS
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
1 OF 2
STEP 1 STEP 2
HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBB Bolt M8 x 45mm 8 PCS
2M8 FLAT WASHER 8 PCS
3 M8 SPRING WASHER 8 PCS
4M5 ALLEN KEY (BALL SHAPE) 1 PC
PART LIST
ITEM DESCRIPTION QTY
ABENCH 1 PC
BLEG FRONT 2 PCS
CLEG BACK 2 PCS
1.1 Open the zip at the bottom of cushion seat and take out leg.
B
C
TOP VIEW
TOP VIEW
B
C
A
MODEL : BBT 8054 - SF

ASSEMBLY INSTRUCTIONS
STEP 3 STEP 4
2 OF 2
BACK
FRONT
BB
C
C
A
2
3
1
4
BACK
FRONT

ASSEMBLY INSTRUCTIONS
MODEL : BBT 8054 - CC
HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBB Bolt M8 x 45mm 8 PCS
2 M8 FLAT WASHER 8 PCS
3 M8 SPRING WASHER 8 PCS
4M5 ALLEN KEY (BALL SHAPE) 1 PC
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
PART LIST
ITEM DESCRIPTION QTY
ACHAIR 1 PC
BLEG FRONT 2 PCS
CLEG BACK 2 PCS
STEP 1 STEP 2
1 OF 2
1.1 Open the zip at the bottom of cushion seat and take out leg. TOP VIEW
TOP VIEW
B
C
A
B
C

ASSEMBLY INSTRUCTIONS
STEP 3 STEP 4
2 OF 2
BB
C
C
BACK
FRONT
2
3
1
4
BACK
FRONT
A

ASSEMBLY INSTRUCTIONS
MODEL : BBT 8054 - BENCH
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
1 OF 2
B
B
STEP 1 STEP 2
HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBB Bolt M8 x 45mm 8 PCS
2 M8 FLAT WASHER 8 PCS
3 M8 SPRING WASHER 8 PCS
4M5 ALLEN KEY (BALL SHAPE) 1 PC
PART LIST
ITEM DESCRIPTION QTY
ABENCH 1 PC
BLEG 4 PCS
1.1 Open the zip at the bottom of cushion seat and take out leg.
B
B
B
B
A
A

ASSEMBLY INSTRUCTIONS
STEP 3 STEP 4
2 OF 2
132
4

PART LIST
ITEM DESCRIPTION QTY
ATABLE TOP 1 PC
BLEGS 4 PCS
ASSEMBLY INSTRUCTIONS
MODEL : BBT 4074 - DT PART LIST
ITEM DESCRIPTION QTY
1JCBC BOLT M6 x 35mm 8 PCS
2M6 SPRING WASHER 8 PCS
3WOOD SCREW M4 x 32mm 8 PCS
4M4 ALLEN KEY 1 PC
STEP 1
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver (not provider).
4
1
3
B
A
2
1 OF 2

ASSEMBLY INSTRUCTIONS
STEP 2
2 OF 2