Baxton Studio BBT6809 Queen User manual

HARDWARE LIST
ITEM DESCRIPTION QTY
1JCBC BOLT M6 x 40mm 6 PCS
2JCBC BOLT M6 x 20mm 4 PCS
3M6 FLAT WASHER 10 PCS
4M6 SPRING WASHER 4 PCS
5M8 SPRING WASHER 2 PCS
6WOOD SCREW M4 x 38mm 9 PCS
7WOOD SCREW M4 x 20mm 10 PCS
8WOOD DOWEL M8 x 30mm 4 PCS
9M4 ALLEN KEY (BALL SHAPE) 1 PC
10 M5 ALLEN KEY (BALL SHAPE) 1 PC
11 METAL BRACKET FOR LEGS 2 PCS
12 PVC BLACK WASHER 2 PCS
13 M8 HEX NUT 2 PCS
14 SPANNER 13mm 1 PC
ASSEMBLY INSTRUCTIONS
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
PARTS LIST
ITEM DESCRIPTION QTY
AHEADBOARD 1 PC
BFOOTBOARD 1 PC
CSIDE RAIL 2 PCS
DHEADBOAR WINGS(L&R) 2 PCS
ECENTER RAIL 1 PC
FCENTER SUPPORT LEG 3 PCS
GBED LEG 4 PCS
HBED SLAT 1 SET
STEP 1
PAGE 1 OF 3
Tool needed : Screwdriver & Rubber Mallet (not provided).
10
12
G
STEP 1.1
STEP 2
x 2
STEP 1.4
E
F
Loosen the pre-inserted
bolt on the
headboard and footboard
using Allen key ball shape
(10). x4
8
D
Don't screw tied
G
14
13
5
11
9
2
4
3
STEP 1.2 STEP 1.3 x 2
x 2

ASSEMBLY INSTRUCTIONS PAGE 2 OF 3
Note : Finish Step 4, please make sure (C) &
(B) corner edge are come together in line
before assembled the bolts then screw tied all
the bolts.
**Finish step 5,
Please screw tied
the step 1 , 3 & 4 bolt.
Don't screw tied
A
C
10
STEP 3 STEP 4
STEP 5 STEP 6
D
3
9
1
7
STEP 5.2
STEP 5.1
7
Attach (C) on (B).
Don't screw tied.
STEP 4.1 B
C
Don't screw tied.
342
9
STEP 4.2

ASSEMBLY INSTRUCTIONS
* When moving the bed position, the center support legs
must be adjust to be straight to avoid any broken problem.
PAGE 3 OF 3
STEP 7 STEP 8
STEP 9 STEP 10
3197
E
A
6
H