Homelegance 9525GRY-3CL User manual

PARTS LIST
NO. DESCRIPTIONQTY
DRAWING
Seat Frame
1
Page: 1/2
1 PC
It is recommended to install protective pads under all legs and supports to avoid damage or scratches
when placing furniture on a wood floor or other hard surface, and to limit indentation and prevent discoloration
if placing on carpet.
HARDWARE LIST
NO. DESCRIPTION
QTY
SKETCH
Screw
A16 PCS
3
4
5
2 4 PCS
1 PC
1 PC
4 PCS
Metal Trundle Leg
LSF ARM
RSF ARM
Plastic Leg
62 PCS
LSF/RSF Back Cushion
ASSEMBLY INSTRUCTIONS

STEP 1:
Attach the Metal Trundle Legs (2) to the Seat Frame (1) by
using Screw (A). And attach the Plastic Legs (5) to the
Seat Frame (1) as shown.
STEP 2:
Lift up one side of the seat, align and connect metal brackets
to assemble the arms to the seat frame.
12
A
5
2
5
3
1
4
4
1
STEP 3:
Attach the Back Cushion (6) to the Seat Frame (1) as shown.
STEP 4:
Assembly Completed.
1
6
IMPORTANT NOTE
Do not use a power tool to assemble this product
as it could damage the thread of the hardware and
affect the solidity/durability of the product.
Hold both handles to pull out the trundle.
Push back rest forward then release it to flat
position when use as a bed.
CARE INSTRUCTION FOR FABRIC FURNITURE
In order to maintain the original appearance of your funiture, please follow below care procedures.
º Avoid exposing furniture directly to sunlight or heating and air conditioning outlets. Sunlight and / or exposure to headting
and air conditioning outles will fade/ damage fabric. Do not place your upholstered too close to windows, radiators, r vents
and be sure to use window treatments to block the sun's rays.
º Wipe with a soft brush to remove dust.
Page: 2/2