Baxton Studio NEVES DAYBED User manual

DAYBED
ASSEMBLY TIPS
1. Remove hardware from box and sort by size.
2. Please ensure that all hardware and parts are
presented prior start of assembly.
3. Please follow attached instruction in the same
sequence as numbered to assure fast and
easy assembly.
WARNING!
1. Don't attempt to repair or modify part that are
broken or defective. Please contact with the
store immediately.
2. This product is for home use only and not
intended for commercial establishment.
NO NOQTYHARDWARE LIST HARDWARE LIST QTY
1
2 5
4
6
JCBB M8 x 16mm 8
ALLEN KEY M5
ALLEN KEY M4
1
1
24
CSK M4 x 25 mm
3
4
4
MINI FIX
HOUSING

NO
A
QTY
DAYBED PART
LIST
1
HEADBOARD PANEL
B1
FOOTBOARD PANEL
C1
BACK PANEL
D 1
SIDE RAIL (Left)
E1
SIDE RAIL (Right)
F 12
BED SLAT

ASSEMBLY INSTRUCTION
STEP 1
STEP 2
·Driving the Mini fix (5) into Headboard (A) and attach the Back panel (C) to Headboard (A) carefully.
Insert the housing (6) into the hole of Back panel (C) then tightening securely.
·Attach the side rail (D&E) to the Headboard (A) by tightening the JCBB M8 x 16mm (1) securely.
·Only tighten when all the hardware are in position.
1
2
i)
ii)
iii)
A
D
E
BE
D
B
55
C
C
6
A
1
2
i)
ii)
iii)
B
55
C
C
6
·Driving the Mini fix (5) into Footboard (B) and attach the Back panel (C) to Headboard (A) carefully.
Insert the housing (6) into the hole of Back panel (C) then tightening securely.
·Attach the side rail (D&E) to the Headboard (A) by tightening the JCBB M8 x 16mm (1) securely.
·Only tighten when all the hardware are in position.

ASSEMBLY INSTRUCTION
STEP 3
STEP 4
·Put the slats (F) in position and screw the CSK M4 X 25mm (4) with screw driver into the slat and bed.
·Insert the Neves Trundle under the bed carefully.
·REMARK: Please reefer to Assembly Instruction for the Trundle Bed assemble.
F
4

ASSEMBLY INSTRUCTION
ASSEMBLY COMPLETE
·Ensure all the screw and fixing are secured periodically.