Riverside Furniture Host 92640 User manual

Seat Frame
Components and Hardware List
Back Leg (Left)
1 pc. 1 pc. 1 pc.
92640 / 41 / 42
1 pc. Host Uph Chair
Page 1 of 3
Made in Viet Nam
1 pc.
1 pc. 1 pc.
MIX-N-MATCH CHAIR
Dining Room
Assembly Instructions
email: [email protected]
Warning :
- Be sure to check all packing material carefully for small parts,
which may have come loose inside the carton during shipment.
- To prevent possible scratches and damage, this furniture must
be assembled on a soft surface such as a blanket or carpet.
C
A
B
D
F
E
G
Back Leg (Right) Front Leg (Right)Front Leg (Left)
1 pc.
H1 pc.
IJ K L
Allen Head Bolt
8 pcs.
Ø5/16"
Spring Washer
8 pcs.
Ø5/16"
Flat Washer
8 pcs.
4mm Allen Key
1 pc.
M
Screw Driver
not included
8 pcs.
N
Wood Screw
Ø4x45 mm
STEP 1: Remove Velcro strips on the seat frame to assemble the legs.
AVelcro
STEP 2.Do not fully tighten the screws.
N
B
C
F
Ø5/16'' x 18 x 2-1/8"
Back Stretcher
19-7/8" x 1-1/4" x 3/4"
Front Stretcher
19-7/8" x 1-1/4" x 3/4"
Side Stretcher (Left)
19-1/2" x 1-1/4" x 3/4"
Side Stretcher (Right)
19-1/2" x 1-1/4" x 3/4"
6 pcs.
Upholstery Tack

Page 2 of 3
Made in Viet Nam
92640 / 41 / 42 Host Uph Chair
MIX-N-MATCH CHAIR
Dining Room
Assembly Instructions
email: [email protected]
M
J
K
L
A
N
E
D
G
STEP 3: Do not fully tighten the bolts.
STEP 5:Do not fully tighten the screws.
N
A
H
I
STEP 4: Do not fully tighten the screws.

Page 3 of 3
Made in Viet Nam
92640 / 41 / 42 Host Uph Chair
MIX-N-MATCH CHAIR
Dining Room
Assembly Instructions
email: [email protected]
N
AL
K
J
M
STEP 6: Using the Allen Key to tighten all bolts.
STEP 7: Using the Philips Head Screw driver to tighten all screws.
STEP 8: Attach all Velcro strips to the seat frame.
Velcro
COMPLETE
Upholstery
Tack
If a tack comes loose, use a hammer to tap it
back into place or replace it with a new one.