Southern Enterprises CM351300TX User manual

CM351300TX
Counter Height Universal Table –
Espresso
Assembly Instructions
For assistance with assembly, contact：
Southern Enterprises Inc.
customer service 1-800-633-5096
[e-mail]
www.seidal.com
Page 1

Counter Height Universal Table – Espresso
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface
like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware
according to the pictures. Using the incorrect hardware will cause damage.
A
Quantity
of 3
cam bolt
B
Quantity
of 4
wood dowel
C
Quantity
of 3
cam lock
D
Quantity
of 14
nut
E
Quantity
of 14
bolt: dia 1/4” x 2” L
F
Quantity
of 3
hinge for top
G
Quantity
of 4
hinge for leg
H
Quantity
of 42
short screw
I
Quantity
of 3
long screw
J
Quantity
of 14
sticker cover
K
Quantity
of 6
leveler
L
Quantity
of 1
allen wrench
Page 2

1
quantity
of 1
top panel
-
A
2
quantity
of 1
top panel
-
B
3
quantity
of 1
back rail
4
quantity
of 1
front rail
5
quantity
of 2
under rail
6
quantity
of 1
outside left frame
7
quantity
of 2
inside left frame
8
quantity
of 2
outside right frame
9
quantity
of 1
inside right frame
Care and cleaning instructions:
Before use, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish.Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call customer service at 1-800-633-5096
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included)
Page 3

Counter Height Universal Table – Espresso
Assembly Instructions
Figure 1
Tip: Wood may scratch easily, Be
careful when assembling.
Insert nut (D) into holes on backside of
rails (3), (4), and (5).
Insert bolt (E) into holes on inside left
frame (7) and inside right frame (9).
Attach three rails (3), (4), and (5) to
inside left frame (7) and inside right
frame (9) by bolt (E) into corresponding
holes until three rails (3, 4, and 5) and
frames (7) and (9) meet.
Tighten bolt (E) by using allen wrench
(L) as shown.
Tip: Make sure nut (D) is inserted
with grooves for screwdriver visible.
Cover bolt holes with sticker cover (J).
Insert cam lock (C) into holes on
pre-assembled unit.
Screw cam bolt (A) into holes on
backside of top panel–A (1).
Attach top panel–A(1) to pre-assembled
unit by inserting wood dowel (B) and
cam bolt (A) into corresponding holes
until top panel–A (1) and pre-assembled
unit meet.
Tighten by rotating cam lock (C)
clockwise with phillips screwdriver.
Insert long screw (I) into predrilled holes
on front rail (4) and then tighten screw
using phillips screwdriver as shown.
Page 4
E
E
E
J
J
J
D
7
9

Figure 3
Attach hinge for leg (G) to outside left
frame (6) and inside left frame (7) with
short screw (H).Tighten short screw (H)
by using phillips screwdriver as shown.
Repeat assembly for outside right frame
(8) and inside right frame (9).
Figure 4
Attach hinge for top (F) to top panel-A
(1) and top panel-B (2) using short
screw (H) and tighten screw using
phillips screwdriver as shown.
Page 5
H
6
7
8
9G
G
6
7
9
8
1
2

Figure 5
Attach leveler (K) to pre-assembled unit
by hand as shown.
Figure 6
Turn the table over.
Adjust the leveler (K) by hand if the table
is not level.
Now your counter height universal table
is ready to use.
Page 6

Figure 7
To fold the table, first, turn top panel–B
over onto top panel–A. Then, turn the
two outside frames over onto the inside
frames as shown.
Reverse the steps in order to convert
into a dining table.
Figure 8
The table is folded.
Adjust the leveler (K) by hand if the table
is not level.
Page 7

Please immediately examine this product carefully. Any request for missing parts or damage replacement must be
received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame.
Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s) and we are
not responsible for any damages due to product modification(s). If damages or missing parts are not reported within 90
days of your receipt, we are under no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central time if
you have product issues or email us at [e-mail]. Please ask for customer service representative for issues
involving damages or replacement parts. Please ask for technical assistance representative for any issues with product
and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
Cit /State/Zip Code
Phone Number
Please indicate where ou purchased this item: Store/Website/Catalog
Please indicate color/size/st le number:
St le No Parts Letter Parts Description Quantit Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019