Bayside KARLBK-N1 User manual

Date 2017-07-26 Rev. 0001-C Factory: DGSFCL
Bookcase
ITM. / ART. 1158049
Model # KARLBK-N1
ASSEMBLY INSTRUCTIONS
IMPORTANT, RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
1-877-494-2536 (English, French and Spanish)
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday
(In U.S., Canada, and Mexico only)
Or visit our website www.baysidefurnishings.com
Or e-mail your request to [e-mail]

2
Unit can tip over causing severe injury or death.
DO NOT allow children to climb on unit.
DO NOT use the shelves as step ladder.
Put heavy items on lower shelves.
Read and follow all assembly instructions.
MANUFACTURER: Bayside Furnishings
®
CATALOGUE: Bookcase (KARLBK-N1)
MADE IN CHINA
MAXIMUM RECOMMENDED WEIGHT LOADS
THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM
WEIGHTS INDICATED. USE WITH LOADS HEAVIER THAN THE MAXIMUM WEIGHTS
INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE INJURY.
IMPORTANT INFORMATION
MAXIMUM LOAD 22.7 kg / 50 lb
MAXIMUM LOAD 13.7 kg / 30 lb

3
Parts and Hardware List
PART # PART DESCRIPTION PART FIGURE QUANTITY
A Left Lower Side Frame 1
B Left Upper Side Frame 1
C Right Lower Side Frame
1
D Right Upper Side Frame 1
E Bottom Shelf 1
F Lower Middle Shelf 1
G Middle Shelf 1
H Upper Middle Shelf 1
I Top Shelf 1

4
Parts and Hardware List
PART # PART DESCRIPTION PART FIGURE QUANTITY
AA Bolt 12+1 extra
BB Bolt 12+1 extra
CC Flat Washer 24+1 extra
Hex-key Wrench 2
Touch-up Pen 1
Tipping Restraint
Hardware Kit
1 set
Additional tools required (not included): Phillips screwdriver, power drill, and 3 mm / .1 in drill bit.

5
Assembly Instructions
1. Combine Left Lower and Upper Side Frames (A and B) together with two Bolts (AA) and two Flat
Washers (CC) as shown.
2. Repeat the same procedure to combine Right Lower and Upper Side Frames (C and D) together.
3. Align and attach Middle Shelf (G) to the centre of Left Side Frame assembly by inserting two Bolts (BB)
with Flat Washers (CC) through the countersunk holes on the Left Lower Side Frame (A) and screw into
the threaded inserts. Leave bolts loose until final assembly.
4. Fasten the shelves (E, F, H and I) to the Left Side Frame assembly by using the Bolts (BB) with Flat
Washers (CC) for front support rails and the Bolts (AA) with Flat Washers (CC) for the back rails.
E
F
G
H
I
A
AACC
A/B
E/F/H/I
E/F/H/I
A/B
BB CC
BBCC
BB CC
G
A
B
B
A
B
D
CAA CC
AA CC
AA CC