
4
bcstrength.com | bcstrength.co.uk | bcstrength.com.au
ASSEMBLY
INSTRUCTIONS
a) If using the Rotating Back Pad (Part H), insert, select and pin at desired height.
a) If using the Rotating Back Pad for Nordic
Ham Curls, securely place this on the Side
Supports at the desired position, as shown in
the picture.
STEP 3
STEP 4 (OPTIONAL)
STEP 5 (OPTIONAL)
a) Insert Round Back Pad (Part F), select and pin at desired height. Tighten all hardware.
Your Thruster is now ready to use.
Disclaimer
Warning: misuse of this equipment can result in severe
injury or even death. Your use of this equipment is
done so at your own risk, and you warrant that you are
both fit and competent to undertake physical activity
and the use of this equipment. Do not overload the
equipment or try to exceed your strength levels. You
assume all risks and responsibilities for all damage,
injury and death which may occur during or following
incorrect use of this equipment in any manner
whatsoever. Regularly check that the maintenance
of surfaces and stability of the equipment is secure,
stable and safe.