BCM Advanced Research MX610H User manual

Part No. E2047MX6H01R
MX610H
12th/13th Gen Intel® Core™ Processors Mini-ITX
Motherboard with Intel® H610E Chipset
User’s Manual
2nd Ed –04 January 2024

MX610H User’s Manual
2 MX610H User’s Manual
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
Notice
This guide is designed for experienced users to setup the system within the shortest time.
For detailed information, please always refer to the electronic user's manual.
Copyright Notice
Copyright 2024 Avalue Technology Inc., ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective
owners.
Disclaimer
Avalue Technology Inc. reserves the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order to improve
design and/or performance. Avalue Technology assumes no responsibility or liability for the
use of the described product(s), conveys no license or title under any patent, copyright, or
masks work rights to these products, and makes no representations or warranties that

User’s Manual
MX610H User’s Manual
3
these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified. Applications that are described in this manual are for illustration
purposes only. Avalue Technology Inc. makes no representation or warranty that such
application will be suitable for the specified use without further testing or modification.
Life Support Policy
Avalue Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN
LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL
OF Avalue Technology Inc.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for
surgical implant into body, or (b) support or sustain life and whose failure to perform,
when properly used in accordance with instructions for use provided in the labeling, can
be reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or system whose
failure to perform can be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or effectiveness.
A Message to the Customer
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/

MX610H User’s Manual
4 MX610H User’s Manual
Product Warranty
Avalue warrants to you, the original purchaser, that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Avalue, or which have been subject to
misuse, abuse, accident or improper installation. Avalue assumes no liability under the
terms of this warranty as a consequence of such events. Because of Avalue’s high
quality-control standards and rigorous testing, most of our customers never need to use our
repair service. If any of Avalue’s products is defective, it will be repaired or replaced at no
charge during the warranty period. For out-of-warranty repairs, you will be billed according
to the cost of replacement materials, service time, and freight. Please consult your dealer
for more details. If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example,
CPU type and speed, Avalue’s products model name, hardware & BIOS
revision number, other hardware and software used, etc.) Note anything
abnormal and list any on-screen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information available.
3. If your product is diagnosed as defective, obtain an RMA (return material
authorization) number from your dealer. This allows us to process your good
return more quickly.
4. Carefully pack the defective product, a complete Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales
receipt) in a shippable container. A product returned without proof of the
purchase date is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it
prepaid to your dealer.

User’s Manual
MX610H User’s Manual
5
Content
1. Getting Started............................................................................................................7
1.1 Safety Precautions ....................................................................................................7
1.2 Packing List...............................................................................................................7
1.3 Document Amendment History .................................................................................8
1.4 Manual Objectives.....................................................................................................9
1.5 System Specifications .............................................................................................10
1.6 Architecture Overview—Block Diagramk Diagram ..................................................13
2. Hardware Configuration...........................................................................................16
2.1 Product Overview....................................................................................................17
2.2 Jumper and Connector List .....................................................................................18
2.3 Setting Jumpers & Connectors ...............................................................................21
2.3.1 Clear CMOS (JCMOS1)................................................................................................................. 21
2.3.2 Enable/disable the Intel ME F/W (JME_DIS1) ............................................................................... 21
2.3.3 AT/ATX Power Select (JATX1) ...................................................................................................... 22
2.3.4 LVDS Backlight Control Select (JLVDS_BKL1) ............................................................................. 22
2.3.5 COM1/2 RI/+5V/+12V Select (JCOMP1_2) ................................................................................... 23
2.3.6 COM3/4 RI/+5V/+12V Select (JCOMP3_4) ................................................................................... 24
2.3.7 LVDS Backlight Power 3V/5V Select (JBKLVOL1)........................................................................ 24
2.3.8 CPU fan connector (CPUFAN1)..................................................................................................... 25
2.3.9 System fan connector (SYSFAN1)................................................................................................. 25
2.3.10 System Panel Connector (JFP1)................................................................................................... 26
2.3.11 ATX-Power Connector (JPWR1)................................................................................................... 26
2.3.12 12V ATX-Power Connector (JPWR2) ........................................................................................... 27
2.3.13 Serial Port connectors (JCOM3/4) ................................................................................................ 27
2.3.14 USB 2.0 Connector (JUSB1/2)...................................................................................................... 28
2.3.15 USB 3.2 Gen 1 Connector (USB3)................................................................................................ 28
2.3.16 Front Panel Audio Connector (JAUD1) ......................................................................................... 29
2.3.17 Amplifier connector (JAMP1)......................................................................................................... 29
2.3.18 I2C connector (JI2C1) ................................................................................................................... 30
2.3.19 Chassis Intrusion Connector (JCASE5) ........................................................................................ 30
2.3.20 SMBus connector (JSMB1) ........................................................................................................... 31
2.3.21 Digital I/O header connector (JGPIO1) ......................................................................................... 31
2.3.22 LVDS Inverter Connector (JINV1) ................................................................................................. 32
2.3.23 JESPI connector (JESPI1) ............................................................................................................ 32
2.3.24 LVDS connector (JLVDS1)............................................................................................................ 33
2.3.25 PS/2 KB&MS Connector (JKBMS1) .............................................................................................. 34
2.3.26 JSPI header connector (JSPI1)..................................................................................................... 34

MX610H User’s Manual
6 MX610H User’s Manual
3.BIOS Setup ....................................................................................................................42
3.1 Introduction .............................................................................................................43
3.2 Starting Setup .........................................................................................................43
3.3 Using Setup ............................................................................................................44
3.4 Getting Help ............................................................................................................45
3.5 In Case of Problems................................................................................................45
3.6 BIOS setup..............................................................................................................46
3.6.1 Main Menu...................................................................................................................................... 46
3.6.1.1 System Date .......................................................................................................................... 46
3.6.1.2 System Time.......................................................................................................................... 46
3.6.2 Advanced BIOS Setup ................................................................................................................... 47
3.6.2.1 CPU Configuration................................................................................................................. 48
3.6.2.2 Supoer IO Configuration........................................................................................................ 49
3.6.2.3 H/W Monitor (PC Health Status)............................................................................................ 50
3.6.2.4 Smart Fan Configuration ....................................................................................................... 50
3.6.2.5 Network Stack Configuration ................................................................................................. 51
3.6.2.6 USB Configuration................................................................................................................. 52
3.6.2.7 PCI/ PCIE Device Configuration............................................................................................ 53
3.6.2.8 GPIO Group Configuration .................................................................................................... 53
3.6.3 Chipset ........................................................................................................................................... 53
3.6.4 Power ............................................................................................................................................. 54
3.6.5 Security .......................................................................................................................................... 55
3.6.5.1 Trusted Computing .................................................................................................................... 56
3.6.5.2 PCH-FW Configuration .............................................................................................................. 57
3.6.5.2.1 PTT Configuration ................................................................................................................. 57
3.6.5.3 Serial Port Console Redirection................................................................................................. 57
3.6.5.3.1 Console Redirection Settings (COM1) .................................................................................. 58
3.6.6 Boot ................................................................................................................................................ 59
3.6.6.1 UEFI Application Boot Priorities................................................................................................. 59
3.6.7 Save & Exit..................................................................................................................................... 59
4. Mechanical Drawing ....................................................................................................61
4.1 Mechanical Drawing................................................................................................62

User’s Manual
MX610H User’s Manual
7
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
Before you begin installing your single board, please make sure that the
following materials have been shipped:
1 x MX610H motherboard
1 x I/O Shield

MX610H User’s Manual
8 MX610H User’s Manual
1.3 Document Amendment History
Revision
Date
By
Comment
1st
December 2023
Avalue
Initial Release
2nd
January 2024
Avalue
Update User condition suggestion

User’s Manual
MX610H User’s Manual
9
1.4 Manual Objectives
This manual describes in details Avalue Technology MX610H Single Board.
We have tried to include as much information as possible but we have not duplicated
information that is provided in the standard IBM Technical References, unless it proved to
be necessary to aid in the understanding of this board.
We strongly recommend that you study this manual carefully before attempting to set up
MX610H or change the standard configurations. Whilst all the necessary information is
available in this manual we would recommend that unless you are confident, you contact
your supplier for guidance.
Please be aware that it is possible to create configurations within the CMOS RAM that
make booting impossible. If this should happen, clear the CMOS settings, (see the
description of the Jumper Settings for details).
If you have any suggestions or find any errors regarding this manual and want to inform us
of these, please contact our Customer Service department with the relevant details.

MX610H User’s Manual
10 MX610H User’s Manual
1.5 System Specifications
MX610H
Processor
Intel® Alder Lake-S Processor Up to 16 Cores 24 Threads Hybrid
LGA1700 Supports Core i9, Core i7, Core i5, Core i3, Pentium, Celeron
Chipset
Intel ® H610E
Memory
2 x DDR5 SO-DIMM slots (262 pin)
Dual channel Non-ECC DDR5 4800 MHz , Up to 64GB
Display
Intel® UHD Graphic
3 x independent displays supported
1 x LVDS 18/24-Bit Dual Channel
- Resolution up to 1366x768 @60Hz (18-Bit)
- Resolution up to 1920x1200 @60Hz (24-Bit)
2 x DP
- Resolution up to 4096×2304 @60Hz
1 x HDMI
- Resolution up to 3840x2160 @30Hz
SATA
3 x SATA III connectors supports Data Transfer rates 6.0Gb/s, 3.0Gb/s and 1.5Gb/s
PCIe
1 x PCIe x16 Gen4 Slot
M.2
1 x 2230 M.2 slot E Key with PCIe x1 & USB 2.0 signal (CNVi Supported)
1 x 2280 & 2242 M.2 Slot M Key with PCIe x4 & SATA 3.0 signal
USB
4 x USB 3.2 Gen 1 (4 x Rear I/O with USB 2.0 signal)
2 x USB 2.0
2 x USB 3.2 Gen 1 (2 x Internal I/O with USB 2.0 signal)
4 x USB 2.0 (2 x Internal I/O)
TPM
Infineon® SLB 9670VQ2.0 FW7.85
Super I/O
Controller
Fintek® F81966AB-I
Serial Ports
2 x RS232/422/485 COM port connector (COM1, COM2)
2 x RS232 COM port connectors (internal COM3, COM4)
PS/2
1 x PS/2 KB/MS
Watch Dog Timer
1 ~ 255 sec timer
HW Monitor
Yes
Smart FAN
1 x PWM FAN for CPU
1 x PWM FAN for System
Audio
Realtek® ALC897
HD Audio Codec with Auto Jack Sensing
LAN
1 x Intel® I219-LM GbE LAN PHY

User’s Manual
MX610H User’s Manual
11
LAN
1 x Intel® i225-V 2.5GbE LAN
BIOS
AMI BIOS with 256Mb SPI ROM
Others IO
8-Bit Digital IO (4 x GPI, 4 x GPO)
SMBus
I2C
Expansion Slots
PCIe
1 x PCIe x16 Gen 4 Slot
M.2
1 x 2230 M.2 slot E Key with PCIe x1 & USB 2.0 signal (CNVi Supported)
1 x 2280 & 2242 M.2 Slot M Key with PCIe x4 Gen 3 & SATA3.0 signal
Internal I/O Headers
SATA
3 x Std. SATA 3.0 Connectors
USB 2.0
2 x USB Headers (2 ports on headers)
USB 3.2 Gen 1
1 x USB Headers (2 ports on headers)
COM Port
4 x 2*5-pin Headers
PS/2
1 x 1*6-pin Header
Smart FAN
2 x 1*4-pin Headers
Front Audio
1 x 2*5-pin Header (Line-in, Mic)
Amplifier
1 x 1*4-pin Header
Front Panel
1 x 2*5-pin Header
Fan Header
2 x 1*4-pin Headers
Chassis Intrusion
Header
1 x 1*2-pin Header
SMBus
1 x 1*4-pin Header
I2C
1 x 1*4-pin Header
Digital IO
1 x 2*5-pin Header
LVDS
1 x 2*20-pin Header
LVDS Inverter
1 x 1*5-pin Header
ATX-Power
1 x 2*12-pin Mini‐Fit Connector
12V ATX-Power
1 x 2*4-pin Mini‐Fit Connector
Internal Jumpers
COM Port
Ring-In/ Power
Select
2 x 2*3-Pin Headers provide selections of “Ring-In”, or “12V” or “5V” on COM1&2
and COM3&COM4 ports
AT/ATX Select
1 x 1*3-Pin Header
Clear CMOS
1 x 1*3-Pin Header
ME FW
Enable/Disable
Select
1 x 1*3-Pin Header
LVDS Backlight
1 x 1*3-Pin Header

MX610H User’s Manual
12 MX610H User’s Manual
Control Select
Back I/O Panel
Audio
1 x Dual Audio Jack (Line-Out, Mic)
LAN + USB 3.2
1 x GbE RJ45 + Dual USB 3.2 Gen1 Stacked Connector
1 x 2.5GbE RJ45+Dual USB 3.2 Gen1 Stacked Connector
USB 2.0
1 x Stack up USB 2.0 Connectors
DisplayPort
1 x Stack up dual DisplayPort Connector
HDMI
1 x HDMI Connector
COM
1 x Stack up dual COMs Connector
Power & Connector
1 x 2*12-pin Mini‐Fit ATX-Power Connector
1 x 2*4-pin Mini‐Fit 12V ATX-Power Connector
Form Factor
Mini-ITX (6.7-in x 6.7-in)
Certification
FCC Class B, CE
Note: Specifications are subject to change without notice.

User’s Manual
MX610H User’s Manual
13
Arch
1.6 Architecture Overview—Block Diagramk Diagram
The following block diagram shows the architecture and main components of MX610H.

MX610H User’s Manual
14 MX610H User’s Manual
User condition suggestion:
Before you proceed
Take note of the following precautions before you install mainboard components or change
any mainboard settings.
•Unplug the power cord from the wall socket before touching any component inside the
system.
•Use a grounded wrist strap or touch a safely grounded object or to a metal object, such
as the power supply case, before handling components to avoid damaging them due to
static electricity.
•Hold components by the edges to avoid touching the ICs on them.
•Whenever you uninstall any component, place it on a grounded antistatic pad or in the
bag that came with the component.
•Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so may
cause severe damage to the mainboard, peripherals, and/or component.
Before you proceed
Before you install the mainboard, study the configuration of your chassis to ensure that
the mainboard fits into it.
Make sure to unplug the power cord before installing or removing the mainboard. Failure to
do so can cause you physical injury and damage mainboard components.

User’s Manual
MX610H User’s Manual
15
Placement Direction
When installing the mainboard, make sure that you place it into the chassis in the
correct orientation. The edge with external port goes to the rear part of the chassis as
indicated in the image below.
Mounting Holes
Place the screws into the mounting holes indicated by the red circles to secure the
mainboard to the chassis.
Do not over-tighten the screws! Doing so may damage the mainboard.

MX610H User’s Manual
16 MX610H User’s Manual
2. Hardware
Configuration

User’s Manual
MX610H User’s Manual
17
2.1 Product Overview

MX610H User’s Manual
18 MX610H User’s Manual
2.2 Jumper and Connector List
You can configure your board to match the needs of your application by setting jumpers. A
jumper is the simplest kind of electric switch.
It consists of two metal pins and a small metal clip (often protected by a plastic cover) that
slides over the pins to connect them. To “close” a jumper you connect the pins with the clip.
To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1,
2, and 3. In this case, you would connect either two pins.
The jumper settings are schematically depicted in this manual as follows:
A pair of needle-nose pliers may be helpful when working with jumpers.
Connectors on the board are linked to external devices such as hard disk drives, a
keyboard, or floppy drives. In addition, the board has a number of jumpers that allow you to
configure your system to suit your application.
If you have any doubts about the best hardware configuration for your application, contact
your local distributor or sales representative before you make any changes.
The following tables list the function of each of the board’s jumpers and connectors.
Jumpers
Label
Function
Note
JCMOS1
Clear CMOS
3 x 1 header, pitch 1.25mm
JME_DIS1
Enable/disable the Intel ME F/W
3 x 1 header, pitch 1.25mm
JATX1
AT/ATX Power Select
3 x 1 header, pitch 1.25mm
JLVDS_BKL1
LVDS Backlight Control Select
3 x 1 header, pitch 1.25mm
JBKLVOL1
LVDS Backlight Power 3V/5V Select
3 x 1 header, pitch 1.25mm
JCOMP1_2
COM1 & COM2
RI/+5V/+12V Select
3 x 2 header, pitch 2.00mm
JCOMP3_4
COM3 & COM4
RI/+5V/+12V Select
3 x 2 header, pitch 2.00mm

User’s Manual
MX610H User’s Manual
19
Connectors
Label
Function
Note
JPWR1
ATX-Power Connector
12 x 2 header, pitch 2.00mm
JPWR2
12V ATX-Power Connector
4 x 2 header, pitch 2.00mm
JSATA1/2/3
Serial ATA Connectors
CPUFAN1
CPU Fan Connector
4 x 1 wafer, pitch 2.54mm
SYSFAN1
System Fan Connector
4 x 1 wafer, pitch 2.54mm
JI2C1
I2C Connector
4 x 1 wafer, pitch 2.0mm
JSMB1
SMBus Connector
4 x 1 wafer, pitch 2.0mm
JFP1
System Panel Connector
5 x 2 header, pitch 2.54mm
JCOM3/4
Serial Port Connector 3/4
5 x 2 wafer, pitch 2.00mm
JGPIO1
Digital I/O header
5 x 2 header, pitch 2.54mm
JCASE5
Chassis Intrusion Connector
2 x 1 wafer, pitch 2.54mm
JKBMS1
PS/2 KB&MS Connector
6 x 1 wafer, pitch 2.00mm
JUSB1/2
USB 2.0 Connector
5 x 2 header, pitch 2.54mm
JAMP1
Amplifier Connector
4 x 1 wafer, pitch 2.00mm
JUSB3
USB 3.2 Gen 1 Connector
10 x 2 Box header, pitch 2.00mm
JAUD1
Front Panel Audio Connector
5 x 2 header, pitch 2.54mm
JINV1
LVDS Inverter Connector
5 x 1 wafer, pitch 2.00mm
Matching connector：JST PHR-5
JLVDS1
LVDS Connector
20 x 2 header, pitch 1.25mm
Matching connector :
DF13-40DS-1.25C
DIMM1
262-pin DIMM slot 1
If there is only one memory
module being installed in the
system, install it on this slot first.
DIMM2
262-pin DIMM slot 2
SLOT1
PCI express x16 slot
M2_E1
2230 M.2 slot E Key
M2_M1
2280 & 2242 M.2 Slot M Key
AUDIO1
1 x Audio Dual Jack (Line-Out, Mic)
Conn2
1 x 2.5GbE RJ45 + Dual USB 3.2
Gen1 Stacked Connector
Conn1
1 x GbE RJ45 + Dual USB 3.2 Gen1
Stacked Connector
USB1
1 x Stack up USB 2.0 Connectors

MX610H User’s Manual
20 MX610H User’s Manual
JSPI1
JSPI1 Connector
4 x 2 header, pitch 2.00mm
JESPI1
JESPI Connector
5 x 2 header, pitch 2.00mm
HDMI1
1 x HDMI Connector
DP1
1 x Stack up dual DisplayPort
Connector
JCOM1
1 x Stack up dual COMs Connector