BCP SKY3353 User manual

SKY3353
Ver. 2
INSTRUCTION
MANUAL
5-Piece Outdoor Patio
Wicker Dining Set

Thank you for choosing us! Since 2002, Best
Choice Products has been bringing customers
high-quality products at the absolute lowest
price. With everything ranging from instruments
and toys to furniture and outdoor, we’ve got
your everyday living essentials covered. We’re
centered around a customer-first philosophy –
with free shipping, exceptional customer
service, and a catalog sourced with you in mind.

| 3
PARTS
4 PCS
SEAT
4 PCS
BACKREST
4 PCS
ABRIGHT ARMREST
C
Please retain these instructions for future reference.
HARDWARE
1
32 PCS
M6 x 35mm
SCREW
M6 x 40mm
SCREW
M6 x 20mm
SCREW
2
8 PCS
3
12 PCS
TOOLS REQUIRED
APPROXIMATELY
45 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
330 LBS
TABLE
CAPACITY
LBS
500 LBS
CHAIR
CAPACITY
LBS
•Please do not exceed the weight limitations of this item.
•Do not stand on or use any part of this item as a step ladder.
•Firmly secure all bolts, screws and knobs before use.
•Reconfirm that all bolts, screws, and knobs are secure every 90 days.
•Fasten screws loosely during assembly. Do not firmly tighten screws until item is fully assembled.
•Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
•Be aware that some parts are heavy and have sharp edges.
•If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made
and/or factory replacement parts are installed.
•Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
NOTICE
M6 WASHER
4
52 PCS
ALLEN WRENCH
(2, PROVIDED)

4|
1 PCS
TABLETOP
D
4 PCS
LEFT ARMREST F
E
4 PCS
SEAT CUSHION
2 PCS
TABLE LEG
G
2 PCS
TABLE SUPPORT
H
PARTS
PRODUCT ASSEMBLY
1Attach a part A seat to a part B backrest with four
part 1 screws and four part 4 washers.
NOTE: Fasten screws loosely during assembly. Do not
firmly tighten screws until item is fully assembled.
A
B
x4
1
x4
4
Due to large
amount of screws,
use of an electric
drill is highly
recommended.

| 5
PRODUCT ASSEMBLY
2Attach a part C right armrest and part D left armrest with four part 1 screws, two part 2 screws,
and six part 4 washers.
3Place a part E seat cushion.
Repeat steps 1 to 3 to build additional chairs.
C
D
E
x6
4
x4
1
x2
2