BCP SKY3885 User manual

SKY3885 + SKY6147
Ver. 3
INSTRUCTION
MANUAL
3-Piece Dinette Set
with Storage Shelves

Fasten screws loosely
during assembly. Do not
firmly tighten screws until
item is fully assembled.
bestchoiceproducts.com

| 3
• Please do not exceed the weight limitations of this item.
• Do not stand on or use any part of this item as a step ladder.
• Firmly secure all bolts, screws and knobs before use.
• Reconfirm that all bolts, screws, and knobs are secure every 90 days.
• Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is
completely assembled.
• Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
• Be aware that some parts are heavy and have sharp edges.
• If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made
and/or factory replacement parts are installed.
• Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
Please retain these instructions for future reference.
NOTICE
TIGHTENING CAMLOCKS
1. Screw cam bolt
in completely.
2. Insert cam bolt and cam lock into
designated holes.
3. Screw cam lock
clockwise to secure
cam bolt.
1
38 PCS
CAM BOLT CAM LOCK
2
38 PCS
M6 X 12MM
SCREW
3
16 PCS
M6 X 35MM
SCREW
4
3 PCS
TABLE HARDWARE
TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
UP TO 45 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
286 LBS
CAPACITY
CHAIR
LBS
44 LBS
CAPACITY
PER SHELF
LBS
110 LBS
CAPACITY
TABLE
LBS
ALLEN WRENCH
(PROVIDED)

4|
TABLE PARTS
A
1 PC
SHELF SIDE I B
1 PC
SHELF SIDE II C
2 PCS
SHELF
SUPPORT I
D
1 PC
SHELF
SUPPORT II
E
3 PCS
SHELF F
1 PC
SHELF BACK
PANEL
G
1 PC
TABLETOP H
1 PC
SIDE FRAME
I
2 PCS
SUPPORT BEAM J
2 PCS
FOOT
5
12 PCS
DOWEL CORNER
BRACE
6
2 PCS
TABLE HARDWARE

PRODUCT ASSEMBLY - TABLE
Screw thirty-two part 1 cam bolts into the part A and B shelf sides, sixteen cam bolts per shelf side.
Insert one part 5 dowel into the top of each shelf side.
1
A
5
1x16
5
B
1
x16
| 5

Locate three part E shelves and insert two part 5 dowels into each.
Locate the part F shelf back panel and insert four part 5 dowels.
2
Attach two part C and one part D shelf support to the part A shelf side with six part 2 cam locks.
3
6|
C
C
D
2
x6
A
F
E5x4
x3
5x6
PRODUCT ASSEMBLY - TABLE

| 7
Attach three part E shelves with six part 2 cam locks.
4
E
E
E
2x6
PRODUCT ASSEMBLY - TABLE

Attach the part F shelf back panel to the part A side panel with four part 2 cam locks.
5
8|
F
2
x4
PRODUCT ASSEMBLY - TABLE

| 9
Attach the part B shelf side panel with sixteen part 2 cam locks.
Set this shelf assembly aside.
6
2x16
B
PRODUCT ASSEMBLY - TABLE

Attach two part 6 corner braces to the part H side frame with four part 3 screws.
Attach two part I support beams to the side frame with four part 3 screws.
Screw two part J feet into the side frame.
7
10 |
Locate the part G tabletop and screw in six part 1 cam bolts, then attach the side frame assembly
to the tabletop with four part 3 screws and three part 4 screws.
8
x2
x2
x2
1x6
x3
4
x4
3
H
I
G
6
3x8
J
PRODUCT ASSEMBLY - TABLE