BCP SKY6573 User manual

SKY6573Ver. 1
Mobile Pocket Herb
Garden Bed
INSTRUCTION
MANUAL

2|
•Do not stand on or use any part of this item as a step ladder.
•Firmly secure all bolts, screws, and knobs before use.
•Reconfirm that all bolts, screws, and knobs are secure every 90 days.
•Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is
completely assembled.
•Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
•Be aware that some parts are heavy and have sharp edges.
•If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made
and/or factory replacement parts are installed.
•Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
•This item is made of wood and may expand due to moisture.
Please retain these instructions for future reference.
HARDWARE
1
30 PCS
3.5 x 55mm
SCREW
5
2 PCS
LOCKING
CASTER
3 x 14mm
SCREW
2
6 PCS
BRACKET
3
2 PCS
CASTER
4
2 PCS
TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
UP TO 45 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
110 LBS
SHELF
CAPACITY
LBS
470 LBS
BED
CAPACITY
LBS
NOTICE
POWER DRILL
(OPTIONAL)

| 3
PARTS
A
2 PCS
LEG I B
2 PCS
LEG II C
2 PCS
SHORT PANEL D
1 PC
LONG PANEL I
E
1 PC
LONG PANEL II F
1 PC
SUPPORT BAR G
2 PCS
BOTTOM
PANEL I
H
2 PCS
BOTTOM
PANEL II
I
3 PCS
VERTICAL
PANELS
J
4 PCS
HORIZONTAL
PANELS
K
1 PC
BOTTOM SHELF L
4 PCS
CROSS BAR
M
8 PCS
PLANT
MARKERS
N
8 PCS
LINERS

1
x2
4|
PRODUCT ASSEMBLY
1
2
Attach one part F support bar to the two part C
short panels with two part 1 screws.
Attach one part E long panel to one part
A leg and one part B leg with four part 1
screws, two screws per leg.
Connect one part C short panel to each
end of the part E long panel with four
part 1 screws, two screws per leg.
Attach one part A leg to one part C
short panel with two part 1 screws.
E
C
C
A
A
B
1
x10
Before securing the legs,
make sure the caster hole
is facing upward.
F

| 5
PRODUCT ASSEMBLY
3
4Attach two part 4 casters into the legs on one
long panel, and two part 5 locking casters on
the other long panel.
Attach four part L cross bars to each leg and
part E long panel with eight part 1 screws,
two screws per bar.
Attach the remaining part B leg to one part C
short panel with two part 1 screws.
Attach one part D long panel to the two part C
short panels with four part 1 screws, two screws
per leg.
BD
1
x6
4
5
4
5
L
x4
1
x8

6|
PRODUCT ASSEMBLY
5
6Attach the part K bottom shelf
with four part 1 screws.
Insert two part G panels and two part H panels
into the bed assembly.
NOTE: Arrange the panels as follows: G, H, H, G
G
GHH
There will be a slight gap between
the two H panels, this is normal and
will reduce warping from moisture.
G
H
1
x4
K

| 7
PRODUCT ASSEMBLY
7
8Insert the part N liners, one liner per pocket.
Insert four part J horizontal panels and
three part I vertical panels.
Attach one part 3 bracket to a part H
panel with three part B screws, repeat
on the opposite side to secure.
J
x4
I
x3
3
x2
2
x6
Nx8

All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long
as the item is returned in its original product packaging and all accessories from its original shipment are
included. All returned items will receive a full refund back to the original payment method. All returned
items will not be charged a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best
Choice Products Customer Service Representative when the return request is submitted. Items received
without an RA may not be accepted or may increase your return processing time. Once an item has been
received by Best Choice Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If
the reason for return is a result of an error by Best Choice Products then Best Choice Products will provide
a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products,
and is the customer’s responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items
returned are not considered undamaged until they are received by Best Choice Products and verified as
such. All damages to items are the customer’s responsibility until the item has been received by and
acknowledge by Best Choice Products as undamaged.
PRODUCT WARRANTY INFORMATION
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or
loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, unapproved modification, or neglect of this product.
HELP CENTER
Product Assembly
Product InquiryChat Support Returns & Refunds
Orders FAQ
WARNING
Question about your product? We're here to help. Visit us at:
help.bestchoiceproducts.com
CHAT
US!