manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. BE QUIET!
  6. •
  7. Computer Hardware
  8. •
  9. BE QUIET! Pure Rock User manual

BE QUIET! Pure Rock User manual

Mounting the CPU cooler
The protective covering on the underneath of the cooler must
be removed prior to installation against the CPU.
Caution: The thermal past supplied is not suitable for human
consumption. If swallowed, drink lots of water and urgently
seek medical attention. Keep it out of the reach of children.
Avoid contact with skin and eyes.
Position the cooler mounting bridge (6) centrally on the cooler
(1). Next place the cooler unit onto the CPU. Insert the Intel/
AMD mounting bridge fastening screws (11) from above into
the cooler mounting bridge and then screw these alternately
tight. You can any cross-tip screwdriver for this.
Fasten the 120mm fan (2) onto the cooler unit (1) using fan
clips (15). Connect the fan to the motherboard’s PWM
signal.
When dismantling the fan (2), push the notches of the fan clips
(15) away from the fan.
Position the cooler mounting bridge (6) centrally on the cooler
(1). Next place the cooler unit onto the CPU. Insert the Intel/
AMD mounting bridge fastening screws (11) from above into
the cooler mounting bridge and then screw these alternately
tight.
Fasten the 120mm fan (2) onto the cooler unit (1) using fan
clips (15). Connect the fan to the motherboard’s PWM
signal.
When dismantling the fan (2), push the notches of the fan
clips (15) away from the fan.
Introduction: Thank you for deciding to purchase a be quiet!
product. The following instructions will guide you through the
installation process. If you do encounter installation problems,
please don't hesitate to contact our customer services by
mailing [email protected]. Please note that be quiet!
cannot accept liability for damage caused by compatibility
problems.
Warranty:
• 3-year manufacturer guarantee for consumers (original
purchase from authorized be quiet! dealers only)
• Guarantee work can only be processed with a copy
included of the purchase receipt from an authorized be
quiet! dealer
• Manipulation and structural changes of any kind, including
any damage caused by external mechanical force, will lead
• to a complete voiding of the guarantee
• Our General Warranty Conditions apply, which can be
viewed on bequiet.com
Listan GmbH & Co.KG . Biedenkamp 3a . 21509 Glinde
Germany
For further information contact us via e-mail:
[email protected]
SCOPE OF DELIVERY
General
We recommend preparatory mounting of the
cooler outside the PC case for subsequent
installation.
The following parts are needed for this:
1x Pure Rock CPU cooler (1), 1x 120mm fan (2), 2x Intel mounting
brackets (4), 1x cooler mounting bridge (6), 4x Intel spacer nuts
(7), 4x mounting bracket fastening screws (10), 2x Intel/AMD
mounting bridge fastening screws (11), 2x fan clips (15)
Assembly of the cooler mounting frame
First screw the Intel spacer nuts (7) onto the threads of the
socket frame. Place the Intel mounting brackets (4) over the
Intel spacer nuts and screw these tight with the mounting
bracket fastening screws (10). You can use any cross-tip
screwdriver for this.
Mounting the CPU cooler
The protective covering on the underneath of the cooler must
be removed prior to installation against the CPU.
Caution: The thermal paste is not suitable for human
consumption. If swallowed, drink lots of water and urgently
seek medical attention. Keep it out of the reach of children.
Avoid contact with skin and eyes.
Installation video
2011(-3) square ILM, 2066
General
We recommend preparatory mounting of the
cooler outside the PC case for subsequent
installation.
The following parts are needed for this:
1x Pure Rock CPU cooler (1), 1x 120mm fan (2), 1x Intel back-
plate (3), 2x Intel mounting brackets (4), 1x cooler mounting
bridge (6), 4x Intel 115X/1366 nuts (8), 4x mounting bracket
fastening screws (10), 2x Intel/AMD mounting bridge fastening
screws (11), 4x Intel backplate screws (12), 4x O-rings (14), 2x
fan clips (15)
Mounting the backplate
Position the Intel backplate screws (12) in the notches situated
on the rear side of the Intel backplate (3). Pay attention in so
doing to align with the holes drilled for each socket.
For fixing the backplate screws onto the Intel backplate use
the O-rings (14). Once assembly of the Intel backplate for the
respective Intel socket has been completed, position it under
the motherboard. In so doing make sure that the backplate
screws are precisely located within the motherboard holes.
Installation of the mounting brackets
Screw the Intel 115X/1366 nuts (8) onto the previously
positioned Intel backplate (3). Then position the Intel mounting
brackets (4) over the Intel 115X/1366 nuts (8) and affix these
with the mounting bracket fastening srews (10). You can use
any cross-tip screwdriver for this.
1366
1150, 1151, 1155, 1156
1366
1150, 1151,
1155, 1156
Intel LGA 2011(-3) square ILM / LGA 2066 Intel LGA 1150 / 1151 / 1155 / 1156 / 1366
We recommend removal of the cooler prior to transportation.
Glinde, 05/2018
!
Part name Quantity
be quiet! Pure Rock CPU cooler 1
120mm fan 1
Intel backplate 1
Intel mounting brackets 2
Long AMD mounting brackets 2
Cooler mounting bridge 1
Intel spacer nuts 4
Part name Quantity
Intel 115X/1366 nuts 4
AMD spacer nuts 4
Mounting bracket fastening
screws 4
Intel/AMD mounting bridge
fastening screws 2
Intel backplate screws 4
AMD backplate screws 4
O-rings 4
Fan clips 2
AM3 washers 4
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Installation video
Mounting the CPU cooler
Position the cooler mounting bridge (6) centrally on the cooler
(1). Next place the cooler unit onto the CPU. Insert the Intel/
AMD mounting bridge fastening screws (11) from above into
the cooler mounting bridge and then screw these alternatively
tight. You can use any cross-tip screwdriver for this.
Fasten the 120mm fan (2) onto the cooler unit (1) using fan
clips (15). Connect the fan to the motherboard’s PWM signal.
When dismantling the fan (2), push the notches of the fan
clips (15) away from the fan..
General
We recommend preparatory mounting of the
cooler outside the PC case for subsequent
installation.
The following parts are needed for this:
1x Pure Rock CPU cooler (1), 1x 120mm fan (2), 2x long AMD
mounting brackets (5), 1x cooler mounting bridge (6), 4x AMD
spacer nuts (9), 2x Intel/AMD mounting bridge fastening
screws (11), 4x AMD backplate screws (13), 2x fan clips (15),
4x AM3 washers (16)
Assembly of the cooler mounting frame
To permit mounting of the cooler please remove both the
plastic retainers of the AMD retention module. The factory-
fitted backplate affixed to the rear side of the motherboard will
be needed for subsequent installation of the cooler.
Note: To mount the Pure Rock (1) on an AM3 motherboard,
please use the four AM3 washers (16), placing these below the
backplate bolts protruding through the front side of the
motherboard.
Place the four AMD spacer nuts (9) onto the backplate bolts
protruding through the front side and affix both long AMD
mounting brackets (5) with the AMD backplate screws (13).
The protective covering on the underneath of the cooler must
be removed prior to installation against the CPU.
Caution: The thermal past supplied is not suitable for human
consumption. If swallowed, drink lots of water and urgently
seek medical attention. Keep it out of the reach of children.
Avoid contact with skin and eyes.
AMD AM2(+) / AM3(+) / AM4 / FM1 / FM2(+)
AM4
AM2(+) / AM3(+) / FM1 / FM2(+)
Notes
bequiet.com
Installation video
Limited Warranty
As per the terms and conditions of this limited warranty as given
below, be quiet! warrants its new products to be free of defects
resulting from faulty materials and faulty manufacturing for the length
of the warranty period.
I. APPLICABILITY
This non-transferable warranty is applicable to newly purchased,
previously unopened be quiet! products and is enforceable by only
the original consumer purchaser. Proof of purchase is required for
warranty service, so should be retained. be quiet! does not provide
warranty registration services.
II. WARRANTY PERIOD
For eligible products, parts and labor are warranted for the appli-
cable warranty period from the date of purchase. The applicable
warranty period varies by product model, and is identied in your
user documentation, on the product package, or as listed below.
Should any of these warranty periods dier, the longest specied
warranty period will apply. Replaced products will be warranted
for the remainder of the original warranty period or thirty days,
whichever is longer.
III. EXCLUSIONS
The following are not covered by the warranty:
1. Normal wear and tear.
2. Any product which has been modied without permission from
be quiet!, or on which the serial number or warranty sticker has been
defaced, modied, or removed.
3. Damage, deterioration or malfunction resulting from:
Accident, abuse, misuse or improper use, neglect, connection to
an improper voltage source, unauthorized product modication, or
failure to follow instructions included with the product.
Fire, water, lightning, or other acts of nature.
Repair or attempted repair by anyone not authorized by be quiet!.
Shipping or transport damage (claims must be made with the carrier).
Any other cause which does not relate to a defect in materials or
manufacturing workmanship.
4. Cartons, cases, batteries, cabinets, tapes, accessories or other
consumables used with this product.
5. be quiet!, Inc. does not warrant that this product will meet your
requirements. It is your responsibility to determine the suitability of
this product for your purpose.
6. Removal or installation charges.
7. Shipping charges.
8. Any incidental charges.
IV. EXCLUSION OF DAMAGES
be quiet!‘s sole obligation and liability under this warranty is limited
to the repair or replacement of a defective product at its option.
be quiet! shall not, in any event, be liable for any special, incidental,
indirect, or consequential damages whatsoever, including but not
limited to loss of prots, revenue, or data (whether direct or indirect),
damages resulting from interruption of service and loss of business,
or for liability in tort relating to this product or resulting from its use
or possession, even if be quiet! has been advised previously of the
possibility of such damages.
V. LIMITATIONS OF IMPLIED WARRANTIES
There are no other warranties, expressed or implied, including but not
limited to those of merchantability or tness for a particular purpose.
The duration of implied warranties is limited to the warranty length
specied in Paragraph II.50
VI. LOCAL LAW AND YOUR WARRANTY
This warranty gives you specic legal rights. You may also have other
rights granted under local law. These rights may vary.
VII. NO OTHER WARRANTY
No be quiet! employee, dealer, or other agent is authorized to make
any modication, extension, or addition to this warranty.
VIII. TO OBTAIN TECHNICAL SUPPORT OR WARRANTY SERVICE
Please see your product owner’s manual or visit the service section
at www.bequiet.com for details and contact information. You will
need to provide proof of purchase for warranty service.
bequiet.com

Other BE QUIET! Computer Hardware manuals

BE QUIET! Shadow Rock User manual

BE QUIET!

BE QUIET! Shadow Rock User manual

BE QUIET! sTRX4 User manual

BE QUIET!

BE QUIET! sTRX4 User manual

BE QUIET! PURE ROCK SLIM User manual

BE QUIET!

BE QUIET! PURE ROCK SLIM User manual

BE QUIET! PURE ROCK SLIM User manual

BE QUIET!

BE QUIET! PURE ROCK SLIM User manual

BE QUIET! Pure Loop BW005 User manual

BE QUIET!

BE QUIET! Pure Loop BW005 User manual

BE QUIET! DARK ROCK PRO 3 User manual

BE QUIET!

BE QUIET! DARK ROCK PRO 3 User manual

BE QUIET! SHADOW ROCK LP User manual

BE QUIET!

BE QUIET! SHADOW ROCK LP User manual

BE QUIET! SILENT LOOP 2 User manual

BE QUIET!

BE QUIET! SILENT LOOP 2 User manual

BE QUIET! MC1 PRO User manual

BE QUIET!

BE QUIET! MC1 PRO User manual

BE QUIET! PURE LOOP 2 User manual

BE QUIET!

BE QUIET! PURE LOOP 2 User manual

BE QUIET! SHADOW BASE 800 FX User manual

BE QUIET!

BE QUIET! SHADOW BASE 800 FX User manual

BE QUIET! DARK ROCK PRO 2 User manual

BE QUIET!

BE QUIET! DARK ROCK PRO 2 User manual

BE QUIET! DARK ROCK 2 User manual

BE QUIET!

BE QUIET! DARK ROCK 2 User manual

BE QUIET! DARK ROCK TF User manual

BE QUIET!

BE QUIET! DARK ROCK TF User manual

BE QUIET! PURE BASE 600 User manual

BE QUIET!

BE QUIET! PURE BASE 600 User manual

BE QUIET! SHADOW ROCK 3 User manual

BE QUIET!

BE QUIET! SHADOW ROCK 3 User manual

BE QUIET! DARK ROCK TF User manual

BE QUIET!

BE QUIET! DARK ROCK TF User manual

BE QUIET! SILENT WINGS 4 User manual

BE QUIET!

BE QUIET! SILENT WINGS 4 User manual

BE QUIET! Shadow Rock 2 User manual

BE QUIET!

BE QUIET! Shadow Rock 2 User manual

BE QUIET! Silent wings 2 User manual

BE QUIET!

BE QUIET! Silent wings 2 User manual

BE QUIET! DARK POWER PRO 13 User manual

BE QUIET!

BE QUIET! DARK POWER PRO 13 User manual

BE QUIET! DARK ROCK PRO TR4 User manual

BE QUIET!

BE QUIET! DARK ROCK PRO TR4 User manual

BE QUIET! SILENT LOOP 2 User manual

BE QUIET!

BE QUIET! SILENT LOOP 2 User manual

BE QUIET! DARK ROCK 4 User manual

BE QUIET!

BE QUIET! DARK ROCK 4 User manual

Popular Computer Hardware manuals by other brands

DAQ system MIPI-ADP03 owner's manual

DAQ system

DAQ system MIPI-ADP03 owner's manual

SilverStone SST-FP36 quick start guide

SilverStone

SilverStone SST-FP36 quick start guide

miniDSP DDRC-88D user manual

miniDSP

miniDSP DDRC-88D user manual

2E GAMING AIR COOL Operation guide

2E

2E GAMING AIR COOL Operation guide

Edimax EW-7108PCg Specifications

Edimax

Edimax EW-7108PCg Specifications

TDK HHM Series HHM1713E2 Specifications

TDK

TDK HHM Series HHM1713E2 Specifications

Congatec conga-QA3 user guide

Congatec

Congatec conga-QA3 user guide

Adeunis RF ARF8020AA user guide

Adeunis RF

Adeunis RF ARF8020AA user guide

Philips 9305 125 2477.5 install guide

Philips

Philips 9305 125 2477.5 install guide

PerfecTron OXY5362A user manual

PerfecTron

PerfecTron OXY5362A user manual

LOVATO ELECTRIC EXP10 12 instruction manual

LOVATO ELECTRIC

LOVATO ELECTRIC EXP10 12 instruction manual

Rosewill RCX-Z755-EX user manual

Rosewill

Rosewill RCX-Z755-EX user manual

Bridgeworks Appliance a005 Hardware manual

Bridgeworks

Bridgeworks Appliance a005 Hardware manual

Procool SP640 Series quick start guide

Procool

Procool SP640 Series quick start guide

DataExpert ATX431 user manual

DataExpert

DataExpert ATX431 user manual

Safeline LXC manual

Safeline

Safeline LXC manual

SilverStone ECS07 installation guide

SilverStone

SilverStone ECS07 installation guide

Peavey DEP 800 operating guide

Peavey

Peavey DEP 800 operating guide

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.