Bebe Care ZURI User manual

IMPORTANT:
RETAIN FOR FUTURE REFERENCE,
READ CAREFULLY
ZURI 2-IN-1 ACTIVITY CENTRE MODEL # 025020

2
Read all instructions before assembly and use of the activity centre.
Keep instructions for future use.
BEFORE ASSEMBLING THIS ACTIVITY CENTRE, READ AND UNDERSTAND THE INSTRUCTIONS.
KEEP INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.
Never leave a child unattended.
Always keep child in view whilst in the activity centre.
Only use on flat surfaces free of objects that could cause the activity centre to tip over.
To avoid burns, keep the child away from hot liquids, ranges, radiators, space heaters and
fireplaces etc.
Do not use the activity centre if it is damaged or broken.
Do not use until baby can sit up by itself. Discontinue seated use mode when child begins to walk.
Remove packaging from activity centre vicinity after assembly.
Use only accessories as recommended by the supplier.
Check that the item is assembled correctly before use.
This item is designed for use by a child 6 months + and up to 12 kgs.
This activity centre should not be used by a child who cannot sit up unaided.
Promptly replace any worn out or broken parts.
The activity centre should not be carried with a child in it.
Keep medication, strings, elastics and small toys out of reach from any position of the activity centre.
FALL HAZARD
Babies can FALL from product resulting in head injuries.
• NEVER leave child unattended. ALWAYS keep child in view while in product.
• NEVER use near stairs.
• To avoid tip over, use product on a flat, level surface.
STRANGULATION HAZARD
Strings can cause STRANGULATION.
• DO NOT place items with a string around child’s neck, such as hood strings or pacifier
cords.
• DO NOT suspend strings over product or attach strings to toys.
SAFETY PRECAUTIONS
WARNING
WARNING

3
Battery Safety Information
In exceptional circumstances, batteries leak fluids that can cause a chemical burn injury or ruin your
product. To avoid leakage:
• DO NOT mix old and new batteries or batteries of different types: alkaline, standard (carbon zinc) or
rechargeable (nickle-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use.
• ALWAYS remove exhausted batteries from the product.
• Dispose of batteries safely.
• DO NOT dispose of this product in a fire. The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same equivalent type, as recommended.
• DO NOT charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged under adult supervision.
SAFETY PRECAUTIONS

4
Due to variations in the style and design of our products, the photographs and illustrations shown in this instruction
manual are generic, therefore product fabrics, colour and design may vary from images shown. CNP Brands reserves
the right to alter product specifications without notice as a result of our ongoing policy of product improvement.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Zuri 2-in-1 Activity Center
Congratulations on your purchase of the Zuri 2-in-1 Activity
Center
This product has been designed and developed with safety, comfort and
functionality in mind. Please take the time to read this manual carefully
before using this product and keep it in a safe place for future reference.
CONGRATULATIONS

5
ASSEMBLY CONTENTS
Check what you have received...
You have received 1 box. Please check the contents of the box against
the list below. If anything is missing, please contact Customer Service.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand
contact Wainhouse Distribution on 0800 567 5000.
Supplied loose in box:
Top Tray
Legs
x 1
x 3
x 1
x 1
x 1
x 1
x 1
Bottom Tray
Toy Tray
Mirror Toy
Toy Bar
Rocket Toy
x 1
Seat
(with seat pad
pre-assembled)

6
ASSEMBLY CONTENTS
There are no accessories recommended for use with this Activity Centre.
Supplied loose in box continued:
Not Supplied:
x 1
x 3 Phillips Head
Screwdriver
AAA
Batteries
x 1
Spindle and Rings
Toy

7
ASSEMBLY / OPERATING INSTRUCTIONS
To Assemble Activity Centre Mode ...
1Lay the Top Tray face down.1a.
2
4
3
5
Insert each Leg into the underside of the table top.
To remove Seat, use the edge of the Seat to lift up
and away from the Top Tray.
Insert the Seat into the opening in the Top Tray and
press down rmly until Seat is secure.
Rotate Seat to ensure the swivel function is working
correctly.
Pinch and pull out the 3 x attachment webbing
straps from the underside of the Top Tray and the
Bottom Tray.
2a.
4a.
3a.
3b.
5a.
NOTE: Ensure the pop-pin correctly clicks into
position.

8
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Activity Centre Mode continued...
5
6
Align the pointed side of the Bottom Tray with the
front of the Top Tray.
Attach the metal clip of the Bottom Tray webbing
to the loop of the Top Tray webbing.
Repeat this step for the remaining 2 x webbing
straps.
There are 3 x height adjustment settings.
To adjust the height of the Bottom Tray, un-hook the
metal clip and x to next height setting.
5b.
5c.
5d.
6a.
6b.
To assemble Toys...
1Place toys on the Top Tray in the order shown.
(From left to right):
- Toy Tray
- Rocket Toy
- Spindle & Rings Toy
- Toy Bar
- Mirror Toy
1a.
NOTE: Ensure the 3 x webbing straps are always used
on the same height setting.
NOTE: The child’s feet should comfortably rest on
the Bottom Tray during use.
NOTE: The position of the toys are not
interchangeable.

9
ASSEMBLY / OPERATING INSTRUCTIONS
Place the Toy Tray back on the Top Frame and
secure by twisting the 2 x tabs on the underside of
the Top Frame.
Secure the remaining Toys to the Top Tray.
To activate the Toy Tray, after inserting the batteries,
turn on the unit with the ON/OFF switch on the
side of the Tray.
2c.
2d.
3a.
To assemble Toys (continued)...
To convert to PlayTable Mode...
2
1
3
Using a Phillips Head Screwdriver (not supplied),
unscrew the battery compartment cover on the Toy
Tray and insert 3 x AAA Batteries (not supplied).
Re-secure the battery compartment cover.
Un-hook the Bottom Tray from the webbing straps
of the Top Tray.
Secure the Bottom Tray Straps on the underside of
the Bottom Tray.
2a.
2b.
1a.
1b.
The Activity Centre is now ready for use.

10
ASSEMBLY / OPERATING INSTRUCTIONS
3
1
2
Secure the Top Tray straps to the underside of the
Top Tray.
Place the Bottom Tray onto the Top Tray and push
down until all tabs secure correctly.
Remove the seat from the Activity Centre.
To remove Top Tray, apply pressure to the edges of
the Bottom Tray from underneath until the Tray is
released.
Remove the Seat and Toys from the Top Tray.
Remove the Bottom Tray from the Activity Centre
webbing straps.
Remove Legs from the Top Tray by pressing the
pop-pin whilst pulling the leg away from Top Tray.
3a.
3b.
2a.
3c.
1a.
1b.
1c.
To convert to PlayTable Mode continued...
To dissassemble...
The Play Table Mode is now ready for use.

11
ASSEMBLY / OPERATING INSTRUCTIONS
1
1
Pull all of the seat tabs down and away from the
holding pins.
Remove the Seat Pad from the Seat.
Place Seat Pad inside the Seat ring.
Ensure the warning label is toward the backrest
of the seat ring.
Fold the Seat Pad sides over the Seat Ring and
secure the seat tabs onto the holding pins.
1a.
1b.
1a.
1b.
To remove Seat Pad...
To assemble Seat Pad...

12
HOW TO CARE FOR YOUR BEBECARE PRODUCT
Cleaning
Maintenance
This product has been designed and developed with safety, comfort and
functionality in mind. Please take the time to read this manual carefully before
using this product and keep it in a safe place for future reference.
To ensure the long-lasting use of your Activity Centre, do not use abrasive
cleaners. Always store product in a clean dry place.
Seat Pad: Remove from frame. Hand wash with cold water. No bleach.
Toy and snack tray: Wipe clean with a damp cloth and mild soap. Air dry.
Do not immerse in water.
Frame: Wipe the frame with a soft, clean cloth and mild soap.
Always check parts regularly for tightness of screws, nuts and other fasteners
– tighten or replace if required. To maintain the safety of your Activity Centre,
seek prompt repairs for bent, torn, worn or broken parts. Use only those parts
and accessories approved by CNP Brands.
If you have any difficulties in assembling the Activity Centre, please contact
our Service Department.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact
Wainhouse Distribution on 0800 567 5000.
Warranty
For all warranty terms and conditions, please visit cnpbrands.com.au

13
ABOUT US
About CNP Brands
Currently, CNP Brands boasts one of the most diverse brand portfolios with a
combination of company owned brands and distribution agreements.
Our own brands, including Childcare, have gone from strength to strength in
recent years. Childcare, and our premium brand bebe care, demonstrate our
commitment to quality and continuing investment in product development.

Distributed in Australia by CNP Brands
82 Maribyrnong Street, Footscray, VIC, 3011
Customer Service 1300 667 137
W: www.cnpbrands.com.au
E: [email protected]
F: www.facebook.com/CNPBrands
I: @cnp_baby
Distributed in New Zealand by Wainhouse Distribution
2-6 Argyle St, Morningside,
PO Box 41-014,
St Lukes, Auckland, New Zealand
Customer Service: 0800 567 5000
E: [email protected]