BED BATH & Beyond MF292468 User manual

ASSEMBLY INSTRUCTIONS
SKU CODE: MF292468/MF292469
1
Weight Limits: 320 lbs
Weight Limits: 220 lbs
Weight Limits: 220 lbs

SAFETY WARNING
2
1. This bed is designed for use only mattress (es) meeting the following specifications on the
upper bunk, and lower bunk:
Upper bunk (bunk bed and tribed included)
Bed type Length Width Thickness
Twin Standard 74” - 75” 38 ½'' 6'' max
Lower bunk
Bed type Length Width Thickness
Full Standard 74” - 75” 53 ½'' 8''
2. Replacement parts, including additional guardrails, maybe obtained from any of our
(GIGACLOUD TECHNOLOGY (USA) INC. 18961 ARENTH AVENUE CITY OF INDUSTRY, CA,
91748) dealers
3. Follow the information on the warnings appearing on the upper bunk bed end structure and on
the carton. Do not remove warning label from bed.
4. Always use the recommended size mattresses or mattress supports, or both, to help prevent
the likelihood of entrapment or falls.
5. Surface of mattress must be at least 5" (127mm) below the upper edge of guardrails.
6. Do not allow children under 6 years of age to use the upper bunk.
7. Periodically check and ensure that the guardrail, ladder, and other components are in their
proper position, free from damage, and that all connectors are tight.
8. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
9. Always use the ladder for entering and leaving the upper bunk.
10. Do not use substitute part. Contact the manufacture or dealer for replacement part.
11. Use of a night light may provide added safety precaution for a child using the upper bunk.
12. Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed
next to the wall, the guardrail that runs the full length of the bed should be placed against the
wall to prevent entrapment between the bed and wall.
13. The use of water or sleep flotation mattresses is prohibited.
14. STRANGULATION HAZARD - Never attach or hang items to any part of the bunk bed that are
not designed for use with the bed; for example, but not limited to, hook, belts and jump ropes.
15. Keep these instruction for future reference.
16. Prohibit more than one person on upper bunk
17. We recommend assembling your bunk bed on the shipping carton to protect your floor or
carpet.
18. Be certain all staples are out of the box before beginning assembly on the shipping carton.

3
1. At the beginning :
Tighten all hardware.
Check metal parts for rust. If found, sand and repaint using a non-lead-based paint meeting
the requirements of 16 CFR 1303.
Check all wood members for deterioration and splinters. Sand down splinters and replace
deteriorating wood members.
Rake and check depth of loose fill protective surfacing materials to prevent compaction and
to maintain appropriate depth. Replace as necessary.
2. Twice a month
Tighten all hardware.
Rake and check depth of loose fill protective surfacing materials to prevent compaction and
to maintain appropriate depth. Replace as necessary.
3. Owners shall be responsible for maintaining the legibility of the warning labels.
4. Disposal Instructions-
There shall be instructions advising the owner to disassemble and dispose of the playground
equipment in such a way that no unreasonable hazards will exist at the time the playground
equipment is discarded.
5. The instructions shall also include the information found in Section 4 of the United States
Consumer Product Safety Commission's (USCPSC) Outdoor Home Playground Safety
Handbook or specific surfacing guidelines for the product consistent with the USCPSC
Handbook. A copy of this section may be found in Appendix X2.
6. Observing the following statements and warnings reduces the likelihood of serious or fatal
injury.
7. Specifying the number and weight of occupants that may safely use the equipment singly or
simultaneously,
8. Recommending on-site adult supervision for children of all ages,
9. Warning the owner to instruct children not to use the equipment in a manner other than
intended,
10. Warning the owner to instruct children not to get off equipment while it is in motion,
11. Warning the owner not to allow children to wear inappropriate items, such as but not limited to,
loose fitting clothing, hood and neck drawstrings, scarves, cord-connected items, capes and
ponchos. These items can cause death by strangulation.
12. Warning the owner to instruct children not to climb when the equipment is wet.
13. Warning the owner to instruct children not to attach items to the playground equipment that
are not specifically designed for use with the equipment, such as, but not limited to, jump ropes,
clothesline, pet leashes, cables and chain as they may cause a strangulation hazard
SAFETY WARNING

4
14. Warning the owner to instruct children to remove their bike or other sports helmet before
playing on the playground equipment.
15. Warning the owner to dress children with well-fitting and full foot enclosing footwear.
Examples of inappropriate footwear are clogs, flip flops, and sandals.
16. Place the equipment on level ground, not less than 6 ft (1.8 m) from any structure or
obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical
wires
17. Do not install home playground equipment over concrete, asphalt, packed earth, grass,
carpet, or any other hard surface. A fall onto a hard surface can result in serious injury or death
to the equipment user
18. To prevent serious injury, cautionary statements shall be included which warn that children
must not use the equipment until properly installed.

ASSEMBLY INSTRUCTIONS
BUNK BED
Thank you for purchasing this quality product. Be sure to check all packing
material carefully for small parts which may have come loose inside the
carton during shipment. Separate, identify and count all parts and hardware.
Compare with the parts list to be sure all parts are present.
"DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED"
5

IMPORTANT:
PLEASE READ INSTRUCTION BEFORE STARTING THE ASSEMBLY
Detail View
BUNK BED
A
E
I
Y
Y
B
C
V
J
P
G
G
G
G
F
F
O
N
K
S
S
H
Z
L
M
AD
WW
W
U
x
Q
R
AC
T
D
6

PART LIST MF292468
A Vertical bar (L+R)
1 L + 1 R 1pc
H Horizontal Frame
1 pc 1 pc
3 pcs
7
1 pc
B Vertical bar
1 pc 1 pc
1 pc
C Vertical bar D Vertical bar
N Vertical bar
R Guard Frame
P Stair Frame
E Guard Frame
2 pcs
2 pcs
1 pc
1 pc
1 pc 1 pc
Q Stair Frame
D Vertical bar
Z Horizontal Bar
T Horizontal Bar
AC Horizontal BarX Horizontal bar AD Guard Frame
1 pc
O Guard Frame
HARDWARE LIST MF292468
6 Allen Key
1/4*18
89 pcs
4*59
1 pc
Ø6*Ø16
4 Washer
1 Bolts 3 Bolts
1/4*55
6 pcs 123 pcs
2 Bolts
1/4*32
28 pcs
5 Screws
#8*10
6 pc

PART LIST MF292469
G SlatsF Slats
1 pc
32 pcs
8 pcs
2 pcs 2 pcs
8
1 pc
2 pcs
K Guard Frame
V Slide Guard Frame Y Guard Frame
2 pcs
16 pcs
4 pcs
1pc
1 pc
M Stair
I Guard Frame
W Slats
U Slats
L Planks
J Slides
S Desk Frame

STEP 1
STEP 2
31/4*18
4Ø6*Ø16
ASSEMBLY INSTRUCTIONS
4
ITEM: MF292468/MF292469
BUNK BED
24 pcs
8 pcs
8 pcs
Ø6*Ø16
31/4*18 24 pcs
A
B
C
Y
I
Y
I
3
3
3
3A
Y
43
6
E
G
G
G
G
GR
3
3
4
36
FGG
G
G
G
R
R
9
F

10
STEP 4
48 pcs Ø6*Ø16
31/4*18 8 pcs
4
36
STEP 3
3
AC
AB
W
W
W
W
W
U
3
W
WW
W
W
AB
UU
31/4*18
4Ø6*Ø16
19 pcs
29 pcs
31/4*18
11/4*55 4 pcs
R
Q
4
1
U
Y
Y
I
I
AE
R
AC
Q
W
W
W
F
GG
G
C
B
4
3
6
6
B
T
T
Q
2
21/4*32 6 pcs
ASSEMBLY INSTRUCTIONS
ITEM: MF292468/MF292469
BUNK BED

11
31/4*18
4Ø6*Ø16
9 pcs
9 pcs
4
3
6
N
N
D
K
48 pcs
Ø6*Ø16
31/4*18 8 pcs
STEP 5
3
3
O
AD
G
G
G
G
G
F
F
F
F
F
4
36
FGG
G
G
G
AD
H
STEP 6
K
ASSEMBLY INSTRUCTIONS
ITEM: MF292468/MF292469
BUNK BED

STEP 7
3
4Ø6*Ø16
5 pcs
8 pcs
4Ø6*Ø16 11 pcs
1/4*18
26 pcs1/4*32
26 pcs1/4*32
AY
EB
C
Y
I
Q
O
K
HH
N
DD
AD
T
AC
G
G
G
G
G
G
F
F
F
F
F
F
F
RR
6
2
34
4
6
B
Y
RR
N
K
O
O
S
Z
DD
N
HH
AD
4
2
6
S
Z
6
1
4
STEP 8
12
x
x
I
4
2
6
I
AD
S
K
11/4*55 2 pcs
3
3
2
2
1
2
2
2
2
ASSEMBLY INSTRUCTIONS
ITEM: MF292468/MF292469
BUNK BED

STEP 9
STEP 10
5#8*10 6 pcs
4Ø6*Ø16 4 pcs
34 pcs1/4*18
HH
Z
S
S
DD
N
S
N
HH
63
4
L
L
Z
Z
Z
5
13
ASSEMBLY INSTRUCTIONS
ITEM: MF292468/MF292469
BUNK BED

STEP 11
STEP 12
4Ø6*Ø16 4 pcs
32 pcs1/4*18
22 pcs1/4*32
O
N
K
M
HH
M
K
M
2
4
K
6
6
43
M
K
HH
4Ø6*Ø16 8 pcs
28 pcs1/4*32
VV
J
2
VJ
2
4
6
14
ASSEMBLY INSTRUCTIONS
ITEM: MF292468/MF292469
BUNK BED

AD
DD
K
V
J
6
3
4
STEP 13
4Ø6*Ø16 2 pcs
32 pcs1/4*18
COMPLETE
V
AD
15
ASSEMBLY INSTRUCTIONS
ITEM: MF292468/MF292469
BUNK BED