Behringer XM1800S User manual

Technical Specifications
sDedicated vocal and instrument mic brings unbelievable quality
to your studio and live performance
sWith On/Off switch
sExtremely high signal output makes your voice cut through
sUltra low distortion for super clean sound
sPresence lift in critical mid range gives you maximum voice
projection
sExceptional off axis rejection eliminates feedback problems
sSuper rugged construction copes with your toughest live assign
ments
sFoam lined impact resistant carrying case included
sMicrophone stand adapter included
sDesigned in Germany. Manufactured under ISO9000 certified
management system
DYNAMIC MICROPHONE XM1800S
ENGLISH
Version 1.2 June 2003

2
DYNAMIC MICROPHONE XM1800S
SPECIFICATIONS
Type: Dynamic
Frequency response: 80 Hz 15 kHz
Polar pattern: Super cardioid
Impedance: 600 Ω
Sensitivity: 52 dBV (0 dBV = 1 V/Pa), 2.5 mV/Pa
Connector: 3 pin balanced XLR (male)
Dimensions:
Head length 57.5 mm
Main unit length 117.5 mm
Total length 175 mm
Weight: 230 g
The information contained in this sheet is subject to change without notice. No part of this sheet may be reproduced or transmitted in any form or by any means, electronic or mechanical,
including photocopying and recording of any kind, for any purpose,
without the express written permission of BEH INGE Spezielle Studiotechnik GmbH.
BEH INGE is a registered trademark. ALL IGHTS ESE VED. © 2003 BEH INGE Spezielle Studiotechnik GmbH.
BEH INGE Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany
Tel. [phone], Fax [phone]
BEH INGE is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice.
Specifications and appearance may differ from those listed or illustrated.