Behringer XENYX 1204 User manual

Technical Specications
XENYX 1204
Premium 12-Input 2/2-Bus Mixer with XENYX Mic Preamps,
British EQs and USB/Audio Interface

2XENYX 1204FX Technical Specifications
XENYX 1204
Premium 12-Input 2/2-Bus Mixer with XENYX Mic Preamps,
British EQs and USB/Audio Interface
Premium ultra-low noise, high headroom analog mixer
4 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
Neo-classic "British" 3-band EQs for warm and musical sound
USB/Audio Interface included to connect directly to your computer. Revolutionary energyXT2.5 Compact music production software included;
more free audio recording and editing software downloadable at www.behringer.com
2 aux sends per channel: 1 pre fader for monitoring applications, 1 post fader for external FX devices
Peak LEDs and mute/alt 3-4 function on all channels
2 subgroups with separate outputs for added routing exibility
2 multi-functional stereo aux returns with exible routing
Balanced main mix outputs with gold-plated XLR connectors plus separate control room, headphones and stereo tape outputs
Control room/phones outputs with multi-input source matrix
Tape inputs assignable to main mix or control room/phones outputs
Long-wearing 60-mm logarithmic-taper faders and sealed rotary controls
Internal autorange power supply for maximum exibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption
for energy saving
Rack mount brackets included for ultimate exibility
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Mono Inputs
Microphone inputs (XENYX Mic Preamp)
Type XLR, electronically balanced,
discrete input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ω source resistance -134 dB / 135.7 dB A-weighted
@ 50 Ω source resistance -131 dB / 133.3 dB A-weighted
@ 150 Ω source resistance -129 dB / 130.5 dB A-weighted
Frequency response <10 Hz - 150 kHz (-1 dB),
<10 Hz - 200 kHz (-3 dB)
Gain range +10 to +60 dB
Max. input level +12 dBu @ +10 dB gain
Impedance approx. 2.6 kΩ balanced
Signal-to-noise ratio 110 dB / 112 dB A-weighted
(0 dBu In @ +22 dB gain)
Distortion (THD+N) 0.005% / 0.004% A-weighted
Line input
Type ¼" TRS connector
electronically balanced
Impedance approx. 20 kΩ balanced
10 kΩ unbalanced
Gain range -10 to +40 dB
Max. input level 30 dBu
Fade-out attenuation1
(Crosstalk attenuation)
Main fader closed 90 dB
Channel muted 89.5 dB
Channel fader closed 89 dB
Frequency Response
Microphone input to main out
<10 Hz - 90 kHz +0 dB / -1 dB
<10 Hz - 160 kHz +0 dB / -3 dB
Specications

3XENYX 1204FX Technical Specifications
BEHRINGER is constantly striving to manintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those
listed or illustrated.
Technical specifications and appearance are subject to change without notice. The information contained herein is correct at the time of printing. All trademarks are the property of their respective owners. MUSIC Group accepts no liability for any loss
which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary slightly from product. BEHRINGER products are sold through authorized dealers
only. Distributors and dealers are not agents of MUSIC Group and have absolutely no authority to bind MUSIC Group by any express or implied undertaking or representation. This manual is copyrighted. No part of this manual may be reproduced or
transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of MUSIC Group IP Ltd. ALL RIGHTS RESERVED. © 2011 MUSIC Group IP Ltd.
Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands
Stereo inputs
Type ¼" TRS connector,
electronically balanced
Impedance approx. 20 kΩ
Max. input level +22 dBu
EQ mono channels
Low 80 Hz / ±15 dB
Mid 2.5 kHz / ±15 dB
High 12 kHz / ±15 dB
EQ stereo channels
Low 80 Hz / ±15 dB
Mid 2.5 kHz / ±15 dB
High 12 kHz / ±15 dB
Aux sends
Type ¼" TS connector, unbalanced
Impedance approx. 120 Ω
Max. output level +22 dBu
Stereo aux returns
Type ¼" TRS connector,
electronically balanced
Impedance approx. 20 kΩ bal. / 10 kΩ unbalanced
Max. input level +22 dBu
Main outputs
Type XLR, electronically balanced
Impedance approx. 240 Ω bal. / 120 Ω unbalanced
Max. output level +28 dBu
Control room outputs
Type ¼" TS connector, unbalanced
Impedance approx. 120 Ω
Max. output level +22 dBu
Headphones output
Type ¼" TRS connector, unbalanced
Max. output level +19 dBu / 150 Ω (+25 dBm)
DSP 24-bit Texas Instruments
Converter 24-bit Sigma-Delta,
64/128-times oversampling
Sampling rate 40 kHz
Main Mix System Data2
Noise
Main mix @ -∞, -105 dB / -108 dB A-weighted
Channel fader -∞
Main mix @ 0 dB, -95 dB / -97 dB A-weighted
Channel fader -∞
Main Mix @ 0 dB, -82,5 dB / -85 dB A-weighted
Channel fader @ 0 dB
Power supply
Mains voltage 100 - 240 V~, 50/60 Hz
Power consumption 40 W
Fuse 100 - 240 V~: T 1.6 A H 250 V
Mains connection Standard IEC receptacle
Physical
Dimensions (H x W x D) approx. 3 / x 9 / x 13"
approx. 97 x 247x 328 mm
Weight (net) approx. 5 / lbs / 2.56 kg
Measuring conditions:
1: 1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output; unity gain.
2: 20 Hz - 20kHz; measured at main output. Channels 1 - 4 unity gain; EQ flat; all channels on main mix; channels 1/3 as far left
as possible, channels 2/4 as far right as possible. Reference = +6 dBu.