Behringer FLANGER MACHINE FL600 User manual

FLANGER MACHINE FL600
Thank you for showing your confidence in us by purchasing the BEHRINGER FLANGER MACHINE
FL600. This high-quality effects pedal delivers 11 extraordinary flanger modes with extensive parameter
control that allow for maximum creativity so you always have the best sound regardless of the situation.
1.CONTROLS
Top view
The TYPE switch lets you choose between a high-fidelity, DIGI(tal) flanger with a flat frequency
response, a vintage-type, ANALOG bucket-brigade delay with filtered frequency response and a
classic studio flanger from the ‘70s (TAPE).
With the TIME control, you can adjust the flanger delay time. Longer delay times produce a
sharper, more detuned sound, very close to a chorus effect.
The SPEED control determines the speed of the flanger effect. In CHORUS, VINTAGE, SINE,
SAW UP and SAW DOWN modes, turning this control to the MIN(imum) brings the LFO to a halt.
The F.BACK control determines the amount of output signal fed back into the flanger input in
order to confer more or less intensity to the effect.
The blue ON/BATT LED illuminates when the effect is activated. It also serves as a battery
level indicator.
Turn up the DEPTH control to achieve a fuller and deeper effect sound.
This control lets you choose between different flanger effect modes:
TRG DWN: The modulation signal triggers a linearly falling wave envelope with a falling time
determined by the SPEED control.
TRG UP:The same as TRG DWN but with a linearly rising wave envelope.
CHORUS:Thesignalismodulatedbyawide-range,triangularwavewithalargeoffsetproducing
a chorus-like effect.
VINTAGE: A simulation of the classic MXR flanger.
RANDOM: A random value generator produces a modulation signal whose level varies with each
cycle of the LFO, which has a smoothing filter applied to the output.
STEP:The same as RANDOM but without the smoothing filter at the LFO’s output.
SINE: The signal is modulated by a sine wave.
ENV UP: The flanger’s delay time is modulated according to the amplitude variations in the input
signal as detected by an envelope follower.
ENV DOWN: The inverted version of ENV UP.
SAW UP:A positive sawtooth wave modulates the signal.
SAW DOWN:A negative sawtooth wave modulates the signal.
POL lets you choose between NEG(ative) and POS(itive) feedback flanger modes.
Use the two 1/4" TS connectors IN A and IN B to plug in a stereo input signal. For mono use
connect to IN A.
The two 1/4" TS connectors OUT A and OUT B send the signal to your amp. Use both outputs to
achieve a full stereo effect. For mono use, connect to OUT A.
In CHORUS, VINTAGE, SINE, SAW UP and SAW DOWN stereo modes, both channel signals
are processed with inverted phase LFOs. In SAW UP and SAW DOWN mono modes, both
delay lines are mixed to create a continuous rise/fall signal.
Press the footswitch to activate/deactivate the effect. Depress the pedal (>2 s) to set the flanger’s
speed by tapping the pedal to the desired tempo. Depress the pedal once again (>2 s) to quit the
set tempo function.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V
battery (not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful
not to scratch the unit.

FLANGER MACHINE FL600
The FL600 has no on/off switch. As soon as you insert the plug into the IN connector,
the FL600 is on. When not using the FL600, remove the plug from the IN connector. This
extends the life of the battery.
The SERIAL NUMBER is located on the underside.
In rare cases interferences of the normal function may appear by external influence (e.g.
electrostatic discharge), as for example sound disturbances or malfunctions. If this
occurs, please turn down the volume on subsequent amplifiers and disconnect the
input connector briefly to restart the application.
2.WARRANTY
For our current warranty terms, please refer to our website at http://www.behringer.com.
3. SPECIFICATIONS
IN A IN B
Connector 1/4"TS Connector 1/4"TS
Impedance 500kΩImpedance 500kΩ
Impedance mono 250kΩ
OUTA OUT B
Connector 1/4"TS Connector 1/4"TS
Impedance 1 kΩImpedance 1 kΩ
Power supply 9 V_, 100 mA, regulated
BEHRINGER PSU-SB
U.S.A./Canada 120 V~, 60 Hz
China 220 V~, 50 Hz
Korea 220 V~, 60 Hz
Europe/U.K./Australia 230 V~, 50 Hz
Japan 100 V~, 50 – 60 Hz
Powerconnector 2 mm DC jack, negative center
Battery 9 V type 6LR61
Powerconsumption 60 mA
Dimensions (H x W x D) approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5")
Weight approx. 0.33 kg (0.73 lbs)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made
from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.
4.SAFETYINSTRUCTIONS
Donotusenearwater,orinstallnearheatsources.Useonlyauthorizedattachments/accessories.Donotserviceproductyourself.
Contactourqualifiedservicingpersonnelforservicingor repairs, especially whenpowersupply cord orplugis damaged.
Noutilizarcercade agua oinstalarcercadefuentes de calor.Utilizasóloaccesoriosyaditamentos autorizados.Nointentes
repararelproductotú mismo. Contactaanuestropersonaltécnico cualificado paraservicioyreparaciones,especialmente
cuando la fuente o el cable de alimentación estén dañados.
Не эксплуатируйте прибор вблизи от источников воды и тепла. Применяйте только авторизованные дополнительные
устройства. Никогда не ремонтируйте прибор самостоятельно. Ремонт может производить только квалифицированный
специализированный персонал, особенно при повреждениях сетевого провода или сетевой вилки.
Technicalspecificationsandappearancesubjecttochangewithoutnotice.Theinformationcontainedhereiniscorrectatthetime
ofprinting.Alltrademarks(exceptBEHRINGER,theBEHRINGERlogoandJUSTLISTEN)mentionedbelongtotheirrespective
ownersandarenotaffiliatedwithBEHRINGER.Thenamesof companies,institutionsorpublicationspicturedormentionedand
theirrespectivelogosaretrademarksoftheirrespectiveowners. Their use neither constitutes a claimofthetrademarksby
BEHRINGERnoraffiliationofthetrademarkownerswithBEHRINGER.BEHRINGERacceptsnoliabilityforanylosswhich may
besufferedbyanypersonwhorelieseitherwhollyorinpartuponanydescription,photographorstatementcontainedherein.Colors
andspecificationmayvaryslightlyfromproduct.Productsaresoldthroughourauthorizeddealersonly.Distributorsanddealers
arenotagentsofBEHRINGERandhaveabsolutelynoauthorityto bindBEHRINGERby anyexpressor impliedundertakingor
representation.Nopartofthismanualmaybe reproducedortransmittedinanyformorbyanymeans,electronicormechanical,
includingphotocopyingandrecordingofanykind, for any purpose, withouttheexpresswrittenpermissionofBEHRINGER
InternationalGmbH.ALLRIGHTSRESERVED. ©2006BEHRINGERInternationalGmbH,Hanns-Martin-Schleyer-Str.36-38,
47877Willich-MünchheideII,Germany.Tel.[phone],Fax[phone]
DiedeutscheAnleitungist erhä[e-mail]
Manuelfrancophoneentéléchargementsurwww.behringer.com
Manualenespañoldisponibleen www.behringer.com
Manualiitalianidisponibili@ www.behringer.com
Русскоязычное руководство @ www.behringer.com
Polska instrukcja dostępna jest pod adresem @ www.behringer.com
[e-mail]
Suomenkielinenkäyttöohjesaatavillaosoitteestawww.behringer.com
Svenskmanualfinns tillgängligpåwww.behringer.com
Danskvejledningfindespå@www.behringer.com
Manualportuguêsdisponí[e-mail]
Åëëçíéêü åã÷åéñßäéï õðÜñ÷åé äéáèÝóéìï óôç äéåýèõíóç www.behringer.com