Behringer Vintage Phaser VP1 User manual

VINTAGE PHASER VP1
Authentic Vintage-Style Phase Shifter
Thank you for showing your condence in us by purchasing the BEHRINGER VINTAGE PHASER VP1.
This high-quality eect pedal is designed for all musicians who want to their sound some extra pep.
Thanks to its high-performance features you get authentic and classic three dimensional phase
shifting—from rapid rotary speaker to impressive jet plane eects.
With the phaser, a second, phase-shifted signal is added to the original audio signal. The resulting sound
is thicker and above all livelier. This eect is often used for guitar sounds and keyboards. In the ’70s,
it was also extensively used for other instruments like electric pianos.
1. Controls
(1) The RATE control determines the speed of the phase shifting eect.
(2) The TONE switch lets you chose between negative feedback (lower position) or positive feedback
(upper position) phaser modes. Negative feedback means that the delayed signal is inverted before it
is fed back to the original signal. In positive feedback mode the delayed signal is not inverted. In this
case the eect has a more detuned character enabling to use the unit as vibrato eect for example.
(3) The STATUS LED illuminates when the eect is activated.
(4) Use the footswitch to activate/deactivate the eect.
(5) Use this ¼" TS INPUT connector to plug in the instrument cable.
(6) The ¼" TS OUTPUT connector sends the signal to your amp.
Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located on the bottom. Open the lid to install or replace the 9 V battery.
◊ The VP1 has no on/o switch. As soon as you insert the jack into the in connector,
the VP1 begins running. When not using the VP1, remove the jack from the in connector.
This extends the life of the battery.
The SERIAL NUMBER is located on the bottom.
(2)
(6) (5)
(3)
(4)
(1)

VINTAGE PHASER VP1
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE
MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSS
WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN.
COLORS AND SPECIFICATIONS MAYVARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS
ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSICGROUP BY ANY EXPRESS OR
IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OFTHIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM
OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS
WRITTEN PERMISSION OF MUSICGROUPIPLTD. ALL RIGHTS RESERVED. © 2012 MUSICGroupIPLtd.Trident Chambers,Wickhams Cay, P.O. Box 146, RoadTown,
Tortola, British Virgin Islands
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories.
Do not service product yourself. Contact our qualied servicing personnel for servicing or repairs,
especially when power supply cord or plug is damaged.
3. Warranty
Please register your new BEHRINGER equipment right after your purchase by visiting
http://behringer.com and read the terms and conditions of our warranty carefully.
4. Specications
In
Connector ¼" TS
Impedance 100 kΩ
In
Connector ¼" TS
Impedance 15 kΩ
Power Supply
9 V, 100 mA DC regulated
PSU-SB-CN 220 VAC adaptor China
BEHRINGER
PSU-SB-EU 230 VAC adaptor Europe
BEHRINGER
PSU-SB-JP 100 VAC adaptor Japan
BEHRINGER
PSU-SB-SAA 240 VAC adaptor Australia
BEHRINGER
PSU-SB-UK 240 VAC adaptor UK
BEHRINGER
PSU-SB-UL 115 VAC adaptor USA
BEHRINGER
Power connector 2 mm DC jack,
negative center
Battery 9 V type 6LR61
Power consumption 30 mA
Physical/Weight
Dimensions approx. 2.9 x 3.3 x 5.6"
(H x W x D) approx. 76 x 86 x 143 mm
Weight approx. 0.86 lbs / 0.39 kg
BEHRINGER is constantly striving to maintain the
highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing
products without prior notice. Specifications and appearance
may therefore differ from those listed or shown.