Behringer ULG10 User manual

Features
Charging the Battery
1. The Battery Level LEDs will ash twice when each unit is turned ON.
2. Fully charge each unit before using them for the rst time.
3. If the level is low, attach the supplied dual cords to a computer USB output.
4. CAUTION: Do not leave the units unattended while they are charging.
Selecting the Channel
1. Channel 1 is automatically selected each time the units are turned on.
2. Note: Use channel 1 unless you are picking up interference. Each unit must be
on the same channel, or they will not operate.
3. If required, press SEL on each unit to change to a dierent channel. All 4 LEDs
will ash twice and show the channel LED.
4. If the units are on dierent channels, then the 4 LEDs on the receiver will start to ash repeatedly
after a few seconds, until you select the correct channel.
5. The transmitter signals can be received by several receivers set to the same channel.
For example, the signal can be fed to 2 ampliers simultaneously to
generate a stereo sound image.
6. To switch o the transmitter and receiver, rst turn o your
power amplier, and then set both on/o switches to the
OFF position.
BATTERY CHARGE/
CHANNEL LEDS
ON/OFF
CHANNEL SELECT
1⁄4" TS
100% Charged Approx 75% Approx 50% Low Battery
USB
Micro USB
Channel 1 Channel 2 Channel 3 Channel 4
ONSEL
Behringer Airplay Guitar ULG10
High-Performance 2.4 GHz Guitar Wireless System with
Ultra-Low Latency and Rechargeable Battery
Quick Start Guide
Important Safety Instructions
WARNING: To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be
performed by qualified service personnel.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not expose a power pack to re or excessive temperature.
Exposure to the re or temperature above 100°C (212°F)
may cause explosion.
8. Do not expose this product to bright sunshine for a long time.
9. Do not disassemble this apparatus. Take it to a qualied service
person when service or repair is required. Incorrect reassembly
may result in a risk of re or injury to persons.
10. Please store this product in a clean and dry environment.
11. Charge it once a month (minimum).
12. Use of a power supply or charger not recommended or sold by
the manufacturer may result in a risk of re or injury to persons.
13. Do not use this apparatus in excess of its output rating.
Overload outputs above rating may result in a risk of re or
injury to persons.
14. Do not use this apparatus if it is damaged or modied.
Damaged or modied batteries may exhibit unpredictable
behavior resulting in re, explosion or risk of injury.
15. Have servicing performed by a qualied repair person using
only identical replacement parts. This will ensure that the
safety of the product is maintained.
16. Switch o this apparatus when not in use.
17. WARNING! Choking and Swallowing Hazard. Keep the
product safely out of reach of children and pets. The small size
and the internal battery present a choking and swallowing
hazard. Failure to follow instructions may lead to permanent
injury or death.
18. WARNING! To prevent possible hearing damage, do not
listen at high volume levels for long periods
19. Correct disposal of this product: This symbol
indicates that this product must not be disposed of
with household waste, according to the WEEE
Directive (2012/19/EU) and your national law. This
product should be taken to a collection center licensed for the
recycling of waste electrical and electronic equipment (EEE). The
mishandling of this type of waste could have a possible negative
impact on the environment and human health due to potentially
hazardous substances that are generally associated with EEE. At
the same time, your cooperation in the correct disposal of this
product will contribute to the ecient use of natural resources. For
more information about where you can take your waste equipment
for recycling, please contact your local city oce, or your
household waste collection service.

LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which
may be suered by any person who relies either
wholly or in part upon any description, photograph,
or statement contained herein.Technical specications,
appearances and other information are subject to
change without notice. All trademarks are the property
of their respective owners. Midas, KlarkTeknik,
Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic,
TC Helicon, Behringer, Bugera, Auratone and Coolaudio
are trademarks or registered trademarks of Music Tribe
Global Brands Ltd. © Music Tribe Global Brands Ltd.
2019 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions
and additional information regarding Music Tribe’s
LimitedWarranty, please see complete details online at
musictribe.com/warranty.
Zhongshan Eurotec Electronics Limited
No. 10 Wanmei Road, South China Modern Chinese
Medicine Park, NanlangTown, 528451, Zhongshan City,
Guangdong Province, China
Other important information
1. Register online. Please register your new Music Tribe equipment right after you purchase it by visiting behringer.com. Registering your
purchase using our simple online form helps us to process your repair claims more quickly and e ciently. Also, read the terms and
conditions of our warranty, if applicable.
2. Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized
Fulller for your country listed under “Support” at behringer.com. Should your country not be listed, please check if your problem can
be dealt with by our “Online Support” which may also be found under “Support” at behringer.com. Alternatively, please submit an
online warranty claim at behringer.com BEFORE returning the product.
FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION
Responsible Party Name: Music Tribe
Commercial NV Inc.
Address: 5270 Procyon Street,
Las Vegas, NV 89118,
USA.
Phone Number: [phone]
FCC ID: QWHULG10
AIRPLAY GUITAR ULG10
complies with the FCC rules as mentioned in the
following paragraph:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Important information:
Changes or modications to the equipment not expressly
approved by Music Tribe can void the user’s authority to use the
equipment.
AIRPLAY GUITAR ULG10
Typical Installation Clipping Units together
MAXIMUM 30 M
BEHRINGER ULTRABASS BT108
Instrument input
RECEIVER
E-Bass TRANSMITTER
Units can be clipped together
for tranportation and storage
RF Connection
Frequency 2.4 GHz
RF output power 20 dBm maximum
Number of channels 4
Channel selection SEL button on each unit
Channel indicator 4 LEDs
Range 30 meters maximum
Audio
Frequency range 20 Hz to 16 kHz
Latency ~ 5ms
Digital signal parameters 24 bit/ 48 kHz
Transmitter audio input ¼" TS
Receiver audio output ¼" TS
Power Supply
Type Internal rechargeable
750 mAh Lithium Battery
Operating time per battery charge Up to 6 hours
Charging method Duo-pin USB charging
cable supplied
Charge status indicators 4 LEDs
Power switch On/O slide switch
Environmental
Operating temperature range 5°C – 40°C
(41°F – 104°F)
Physical (set)
Dimensions (H x W x D) 40 x 72 x 32 mm x2
(0.13 x 0.24 x 0.10") x2
Weight 0.045 kg (0.02 lbs) x2
Specications