Beijing Aitefeixiang Technology DDMALL MRV-10 User manual

MRV-10 Instructions V1.0
1
MRV-10 Mixing Twisted Pair Extender Instructions V1.0
1. Instruction：
The passive enhanced MRV-10 distance extension is the accessory for both transmitter and
receiver.
Kit distinction: the back of the transmitter is marked with "T", the receiver is marked with
"Receiver", the twisted pair cable connector is marked with “RX”.
If the image quality is less good, please charge on the receiver.
2. Specifications:
Item
Transmitter ( T )
Receiver ( R )
Maximum Resolution
1920×1200@60Hz
Input TMDS Signal
1.2Vp-p
Input DDC Signal
5Vp-p（TTL）
Maximum Distance
80m（Using CAT.6 Cable）
Input Connector
HDMI Type A
RJ-45
Output Connector
RJ-45
15 Pin HD Jack , ear Jack
DC Offset
——
DC 5V 1A
Net Weight
0.1KG
Gross Weight
0.2KG
Packing Size
140*90*50（L*W*H）
3. RJ45 PIN & Wiring standard definition：
RJ45
PIN
Color
Function
1
White-orange
TMDS DATA 2+
2
Orange
TMDS DATA 2-
3
White-green
TMDS CLOCK +
4
Blue
TMDS DATA 1+
5
White-blue
TMDS DATA 1-
6
Green
TMDS CLOCK -
7
White-brown
TMDS DATA 0+
8
Brown
TMDS DATA 0-
Note:
1) Make sure that the cable wiring order is the B class, which is orange-white, orange, green-white,
blue, blue-white, green, brown-white, brown .
2) Please ensure the connection is fine before operating the signal source equipment (such as PC
and edge blending processor).
3) Check if there’s any loose for every connection, make sure they are well connected if the
connection distance is far away.

MRV-10 Instructions V1.0
2
4. Transmission distance:
The transmission distance of using CAT.6 cable (With the different performance of display device,
PC and twisted pair cable, the maximum transmission distance may be slightly different).
Resolution
Distance(m)
Resolution
Distance(m)
800×600
80
1600×900
60
1024×768
80
1680×1050
60
1280×720
60
1920×1080
50
1280×1024
60
1920×1200
50
Downward compatible with multiple resolutions
5. Connecting method:
Connect the transmitter to the HDMI signal source and connect the receiver to the VGA display
device. Transmitter and receiver are connected by a CAT.6 cable.As shown below:
MRV-10 transmitter connection
MRV-10 receiver connection

MRV-10 Instructions V1.0
3
Network port indicator Light
6. Precautions:
1) MRV-10 does not support HDCP compliant.
2) VGA connector of the receiver requires external power supply during use.
3) Keep away from the equipment that can generate electromagnetic waves, such as
microwave ovens, radio equipment, high voltage lines, etc.
4) Please use high quality CAT.6 cable. The performance of twisted pair cable may directly
affect the maximum transmission distance.
5) Network wiring cannot use STP wire or flat wire. Otherwise it will result in no images.
6) Transmitter and receiver cannot be mixed, and need to be connected by rules. Otherwise
it will result in no images.
7) During use please do not hot plug. Otherwise, the device will be damaged.