Techly IDATA EXT-565 User manual

P/N: IDATA EXT-565
8059018364187
EN User's Manual
IT Manuale d’istruzione HDMI EXTENDER
4K@60HZ
Technical features
70 M
POINT
TO POINT

HDMI EXTENDER 4K@60HZ
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read
these instructions carefully before connecting, operating or adjusting this product. Please
keep this manual for future reference.
IMPORTANT SAFETY INSTRUCTION
INTENDED USE
We do not permit using the device in other ways like described in
this user’s manual. Use the product only in dry interior rooms. Not
attending to these regulations and safety instruction might cause
fatal accidents, injuries, and damages to persons and property.
The manufacturer/supplier assumes no liability for damages caused by failure to
comply with the intended use.
To reduce risk of electric shock, this
product should ONLY be opened
by an authorized technician when
service is required. Disconnect the
product from mains and other equipment if a problem should occur. Do not
expose the product to water or moisture.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
• Your product is not a toy and is not meant for children, because it contains small
parts which can be swallowed and can injure when used inappropriately!
• Please install the system and devices attached to it in a way that persons cannot
be injured, or objects not be damaged for example by dropping or stumbling.
• Please remove the packing materials, because children may cut themselves on
them while playing. Furthermore, there is a risk of swallowing and inhalation of
incidentals and insulating material.
• Avoid places with high temperatures, or humidity, or places which might come
into contact with water. Do not install the product close to openings of air
conditioners, or at places with an excessive amount of dust or smoke.
• Do not install the product at places subject to vibration, or oscillation.
• Do not modify and alter the product and any accessories! Do not use any
damaged parts.
• Keep enough space around all devices for a good ventilation and free motion and
to avoid damages.
• Do not mix up HDMI to RJ45 transmitter and RJ45 to HDMI receiver before
installation
• Do not unplug the deive when it is in using, keep distance from flammable and
explosive devices.
• Power supply: DC 5V/2A, usage only the supplied power unit, do not use the
power supply if it is damaged. Make sure specification matched if using 3rd party
adapters
• Static electricity will cause damage of the device, please do ESD protection when
using the device
EN - 2
WWW.TECHLY.COM
HDMI EXTENDER
4K@60HZ

FEATURES
This is a point-to-point extender kit, it can realize zero-latency transmission. The
4K@60Hz HDMI signal can be extended by 70m through CAT6/6A/7network cable.
It supports HDMI loop out, IR passthrough. 3.5 mm audio output, ...This is a reliable,
ultra-high-definition video transmission solution, which is widely used in security
monitoring, home theater, broadcasting, training and other fields.
• Zero-latency transmission
• Extend 4K@60Hz HDMI signal up to 70m over Cat6/6A/7 cable
• The receiver supports 3.5 mm stereo output
• Supports HDR10
• Supports EDID Passthrough and audio downscaling
• The transmitter supports HDMI loop out
• Supports IR passthrough
• Lightning protection, surge protection, EDS protection
PACKAGE CONTENTS
Make sure your package includes the following items:
• Transmitter unit *1
• Receiver unit *1
• Power supply DC5V/1A*2
• IR Blaster extension cable *1
• IR receiver extension cable *1
• Mounting brackets *4; screws *10
• User' s manual
INSTALLATION REQUIREMENTS
Signal source Devices with HDMI port (PC, DVR, NVR, etc) HDMI cable ≤ 5m
Cable Cat6/6A/7 following standard EIA-568B Cat6/6A/7 ≤ 70m
Display device TV, projectors, … with HDMI port HDMI cable ≤ 5m
WALL MOUNTING
Install the mounting ears on the unit according with the diagram and select the wall
mounting position to fix it.
EN - 3
WWW.TECHLY.COM
HDMI EXTENDER
4K@60HZ

PANEL DESCRIPTION
Transmitter (TX)
7
Reset button Press to restart the device
RJ45 signal
output Connect with network cable
IR out Connect with IR blaster extension cable
Power/Signal
indicator
When there is power and no HDMI signal, the indicator will flash,
when there is HDMI signal, the indicator will light solid
DC5V power
input Connect with DC5V/1A power adapter
HDMI output Connect with local HDMI display device with HDMI cable
HDMI input Connect with HDMI source device with HDMI cable
EN - 4
WWW.TECHLY.COM
HDMI EXTENDER
4K@60HZ

Receiver (RX)
7
Reset button Press to restart the device
RJ45 signal
input Connect with network cable
IR in Connect with IR receiver extension cable
Power indicator When there is power and no HDMI signal, the indicator will flash,
when there is HDMI signal, the indicator will light solid
DC5V power Connect with DC5V/1A power adapter
HDMI output Connect with HDMI display device with HDMI cable
3.5 mm stereo
output Connect with earphone or speaker
INSTALLATION PROCEDURES
Connection diagram
EN - 5
WWW.TECHLY.COM
HDMI EXTENDER
4K@60HZ

Connection instruction
1) Connect the source device to the HDMI IN port of the transmitter with an HDMI
cable and connect the HDMI output port of the receiver to the display device with
another HDMI cable
2) Use a Cat6/6A/7 cable to connect RJ45 port of the transmitter and receiver
3) If using HDMI loop out, connect the display device to the HDMI OUT port of the
transmitter
4) If using IR passthrough, the IR blaster extension cable should plug in the IR OUT
port of the transmitter, the receiver extension cable should plug in the IR IN port
of the receiver
5) If you need to output audio additionally, connect the speaker to the L/R port with
3.5 mm stereo audio cable
6) Plug the power supply in to the device to get started
IR User Guide
1) IR Blaster extension cable should plug in the IR OUT port of the transmitter
or receiver. IR Receiver extension cable should plug in the IR IN port of the
transmitter and receiver
2) The emitter of the IR Blaster extension cable should be as close as possible to the
IR receiving window of the source device
3) Point the remote control at the receiving head of the IR receiver extension cable
to operate
FAQ
Q: The devices are connected correctly, but why is there no image displayed?
A: 1) Please make sure the HDMI cables meets the transmission requirements (e.g.
4K HDMI cable)
2) Please check and make sure the network cable is connected well
3) Restart the transmitter or receiver by pressing the reset button
Q: Why does the display occasionally have a black screen?
A: 1) Check if the lenght of the cable is within the specified range
2) Reset the transmitter or receiver to re-built the connection
Q: The display shows unusual color or no sound?
A: 1) Reset the transmitter or receiver to re-built the connection
2) Check if the HDMI cables are connected well
3) Reconnect the network cable
1. Power
2. IR Signal
3. Null
1. Power
2. IR Signal
3. Grounding
EN - 6
WWW.TECHLY.COM
HDMI EXTENDER
4K@60HZ

TECHNICAL PARAMETERS
TRANSMITTER RECEIVER
VIDEO
Input interface
1 x HDMI Type A Female 1 x RJ45 Female
Output interface
1 x HDMI Type A Female
1 x RJ45 Female 1 x HDMI Type A Female
HDMI lenght ≤ 5m ≤ 5m
Maximum transfer rate 18Gbps
Maximum transmission
bandwidth
600MHz
EDID passthrough Yes
Compatibility
HDMI2.0 (Deep Color, 4K, HDR, YUV4:4:4)
HDCP 2.2
HDMI resolution
480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz,
720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz,
3840x2160@24/25/30/50/60Hz, 4096x2160@24/25Hz,
1280x960, 1280x800, 1280x768, 1680x1050,
1360x768, 1366x768, 1600x900, 1024x768, 800x600
Transmission distance CAT6/6A/7 ≤ 70 m
AUDIO
Input interface
1 x HDMI Type A Female N/A
Output interface 1 x HDMI Type A Female 1 x HDMI Type A Female
1 x 3.5mm L/R Female
Audio formats
LPCM/DTS-HD/DTS-Audio/Dolby Digital 5.1CH/Dolby
Atmos
COMMAND SIGNAL
IR Interface
1 x 3.5mm IR OUT Female 1 x 3.5mm IR IN Female
Receiving range ≤ 5m
Infrared frequency 20KHz - 60KHz
POWER
Power supply
DC5V/1A DC5V/1A
Power consumption <3W <3W
OPERATING ENVIRONMENTAL
Working temperature
-20 to 60°C
Storage temperature -30 to 70°C
Humidity 0 -90 % RH (no condensation)
PHYSICAL PROPERTIES
Housing
Metal
Weight 140 g 140 g
Color Black
Dimension 85.0 (L) x 75.5 (W) x 16.5 (H) mm
Protection level
ESD Protection
1a Contact discharge level 2 (+/-4KV)
1b Air discharge level 3 (+/-8KV)
implementation of the standard IEC61000-4-2
Lightning proctection, surge protection
Certification CE/FCC/RoHS2.0
EN - 7
WWW.TECHLY.COM
HDMI EXTENDER
4K@60HZ

Maintenance: clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty: no guarantee or liability can be accepted for any changes and
modifications of the product or damage caused due to incorrect use of this product.
In compliance with EU Directive WEEE this product is marked with this
symbol. It means that used electrical and electronic products should not
be mixed with general household waste.There is a separate collections
system for these products in compliance with WEEE directive,otherwise
contaminative and hazardous substances can pollute the environment.
With the CE sign, Techly®ensures that the product is conformed to the
basic European standards and directives. CE declaration is available on
web site at the product page.
EN - 8
WWW.TECHLY.COM
HDMI EXTENDER
4K@60HZ

EXTENDER HDMI 4K@60HZ
Gentile Cliente
Grazie per aver acquistato questo prodotto. Per ottenere il massimo delle prestazioni nella
salvaguardia della sua sicurezza, le consigliamo di leggere con attenzione il presente
manuale prima di collegare e mettere in funzione il prodotto.Tenga sempre a disposizione
il presente manuale per ulteriori esigenze future.
IMPORTANTI INFORMAZIONI SULLA SICUREZZA
USO PREVISTO
Non è consentito l’uso dell’apparecchio in modi diversi da quello
indicato nel presente manuale. Utilizzare il prodotto solo in luoghi
interni asciutti. Non rispettare le istruzioni e le precauzioni di
sicurezza riportate nel presente manuale potrebbe causare
incidenti mortali, lesioni e danni a persone e cose. Il costruttore/fornitore non
risponde dei danni risultanti da un utilizzo non conforme all’uso previsto.
Per ridurre il rischio di shock
elettrico, questo prodotto
dovrebbe essere aperto SOLO da
un tecnico autorizzato quando
è necessario ripararlo. Scollegare il prodotto dall’alimentazione e da altri
apparecchi se dovesse esserci un problema. Non esporre il prodotto ad acqua o
umidità.
ATTENZIONE
RISCHIO DI SCOSSE ELETTRICHE
NON APRIRE
• Questo prodotto non è un giocattolo e non è pensato per i bambini, contiene
piccolo parti che potrebbero venir ingerite o inalate e provocare danni se non
utilizzato correttamente!
• Installare l’apparecchio e le periferiche ad esso collegate in modo che non
possano provocare danni a persone e oggetti come far inciampare o causare
cadute.
• Rimuovere tutti gli imballi che potrebbero causare soffocamento se manipolati
da bambini.
• Evitare di installare l’apparecchio in luoghi con temperature o umidità eccessive,
o luoghi che potrebbero venire a contatto con l’acqua. Non installare vicino a
bocchette dell’aria condizionata o in luoghi che presentano polvere o fumi
eccessivi.
• Non utilizzare l’alimentatore se risultasse danneggiato.
• Non installare il prodotto in luoghi soggetti a vibrazioni o oscillazioni.
• Non modificare o alterare il prodotto e i suoi accessori! Non utlizzare parti
danneggiate.
• Mantenere sufficiente spazio attorno alla periferica per garantire una buona
ventilazione, permettere una maggiore libertà di movimento ed evitare danni.
• Non invertire il trasmettitore da HDMI a RJ45 con il ricevitore da RJ45 a HDMI
prima dell'installazione
• Non scollegare la periferica durante l’uso, mantenere il prodotto distante da
materiali infiammabili ed esplosivi.
WWW.TECHLY.COM
IT - 9
EXTENDER HDMI
4K@60HZ

• Alimentatore: DC 5V/2A, utilizzare solo l’alimentatore fornito nella confezione.
Non utilizzare se l’alimentatore risulta danneggiato. Se si usa un alimentatore
di terze parti verificare che le specifiche di questo coincidano con l'alimentatore
originale.
• L'elettricità statica può danneggiare il dispositivo, si prega di usare una
protezione contro le cariche elettrostatiche quando si utilizza il dispositivo.
CARATTERISTICHE
Questo è un extender HDMI punto-punto e consente di ottenere una trasmissione
del segnale senza latenza. Il segnale HDMI 4K@60Hz può essere esteso utilizzando
un cavo di rete di Cat.6/6A/7. È dotato di una porta HDMI sull'unità locale, supporta
IR passthrough, uscita audio su connessione 3.5mm....Rappresenta una soluzione
di trasmissione video affidabile e in alta risoluzione, ideale per la pubblicità esterna,
videoclip, sistema di monitoraggio, home entertainment e conferenze, ecc.
• Trasmissione con zero latenza
• Estende il segnale 4K@60Hz fino a 70 metri attraverso un cavo di rete Cat.6/6A/7
• Il ricevitore supporta uscita stereo su connessione da 3.5mm
• Supporta HDR10
• Supporta EDID Passthrough e downscaling dell'audio
• Il trasmettitore supporta uscita HDMI locale
• Supporta IR passthrough
• Protezione contro i fulmini, protezione contro le sovratensioni, protezione
antistatica
CONTENUTO DELLA CONFEZIONE
Verificare che nella confezione siano inclusi i seguenti elementi:
• Trasmetitore *1
• Ricevitore *1
• Alimentatore DC5V/1A *2
• Prolunga IR blaster *1
• Prolunga ricevitore IR *1
• Staffe di montaggio *4; viti *10
• Manuale d'istruzione
REQUISITI PER L'INSTALLAZIONE
Sorgente del
segnale Periferica con porta HDMI (PC, DVD, NVR, ecc) Cavo HDMI ≤ 5m
Cavo Cavo Cat6/6A/7 conforme allo standard
EIA-568B Cat6/6A/7 ≤ 70m
Periferica di
visualizzazione TV, proiettore, …con porta HDMI Cavo HDMI ≤ 5m
WWW.TECHLY.COM
IT - 10 EXTENDER HDMI
4K@60HZ