Thinklogical CFL-3000 User manual

®
Camera Fiber-Link
Digital Camera Extension System
For models CFL-3000, CFL-4000, CFL-5000 and CFL-6000
Extend Distribute Innovate
®
Thinklogical, LLC®
100 Washington Street
Milford, Connecticut 06460 U.S.A.
Telephone: [phone]
Fax: [phone]
www.thinklogical.com

Camera Fiber-Link Extender Manual, Rev. E, June, 2012 Page | i
Copyright Notice
Copyright © 2012. All rights reserved. Printed in the U.S.A.
Thinklogical, LLC ®
100 Washington Street
Milford, Connecticut 06460 U.S.A.
Telephone: [phone]
All trademarks and service marks are the property of their respective owners.
Extend Distribute Innovate
®
Subject: Camera Fiber-Link Video Extension System - CFL3000, -4000, -5000, -6000
Revision: E, June 2012

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual ii Rev. E, June 2012
Table of Contents
1. Introduction 1
1.1 The Logical Solution 1
1.2 The Camera Fiber-Link System 1
1.2.1. Thinklogical® Camera Fiber-Link Models 3
1.2.2. Increased Security 4
1.2.3. Class 1 LASERs 4
2. System Features 5
2.1. General System Features 5
2.2. Hardware Features 6
2.2.1. CFL-3000 6
2.2.2. CFL-4000 7
2.2.3. CFL-5000 8
2.2.4. CFL-6000 9
2.2.5. Power Enhancement Kit (Optional) 9
2.2.6. DIN Rails (Optional) 9
2.3. Technical Specifications 10
3. Connecting the Camera Fiber-Link 12
3.1 Types of Connections 12
3.1.1. Fiber Cable 12
3.1.2. Digital Video Camera Side 12
3.1.3. Digital Video Frame Grabber Side 12
3.1.4 Serial Port 12
3.1.5 Camera Control 14
3.2. AC Power 14
3.2.1. Standard Version: 5V-12V 14
3.2.2. Industrial Version: 12V-24V 15
4. Order of Installation Events 15
4.1 CFL-3000 16
4.2 CFL-4000 17
4.3 CFL-5000 18
4.4 CFL-6000 19
5. Regulatory & Safety Compliance 20
5.1 Safety Requirements 20
5.1.1. Symbols Found On Our Products 20
5.1.2. Product Serial Number 20
5.1.3. Connection to the Product 20
5.2 Regulatory Compliance 20
5.2.1. North America 20
5.2.2. Australia & New Zealand 20
5.2.3. European Union 21
5.2.3.1. Declaration of Conformity 21
5.2.3.2. Standards With Which Our Products Comply 21
5.3 Supplementary Information 21

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual iii Rev. E, June 2012
6. How to Contact Us 22
6.1 Customer Support 22
6.1.1 Website 22
6.1.2 Email 23
6.1.3 Telephone 23
6.1.4 Fax 23
6.2 Product Support 24
6.2.1 Warranty 24
6.2.2 Return Authorization 24
6.2.3 Our Address 24
Table 1 Available Models 3
Table 2 Technical Specifications 10
Figure 1 Camera Fiber-Link and Cabling Application Drawing 2
Figure 2 Top & side views of CFL-3000 6
Figure 3 Top & side views of CFL-4000 7
Figure 4 Top & side views of CFL-5000 8
Figure 5 Top & side views of CFL-6000 9
Figure 6 Serial Port (RJ45) Connections 13
Figure 7 5V-12V Power Supply 14
Figure 8 12V-24V Power Supply 15
Figure 9 CFL-3000 Quick Start Diagram 16
Figure 10 CFL-4000 Quick Start Diagram 17
Figure 11 CFL-5000 Quick Start Diagram 18
Figure 12 CFL-6000 Quick Start Diagram 19
Figure 13 DB9/RJ45 Adapter Pin-outs 32
Figure 14 CFL Mounting Template 35
Appendix A Camera and Frame Grabber Compatibility Chart 26
Appendix B DB9/RJ45 Adapter Pin-outs 32
Appendix C Maximum Distances for Fiber Types 33
Appendix D Camera Fiber-Link Mounting Template 34
.

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 1 Rev. E, June 2012
1.Introduction
1.1. The Logical Solution
Process and machine monitoring, safety, security and surveillance applications often require that
remote cameras be positioned far from their controlling computers. Long distance image
transmission, security and resolution are top priorities in these and many other environments.
That’s why we’ve developed the Thinklogical®Camera Fiber-Link Extension System with the
Camera-Link®standard for high performance digital cameras and frame grabbers.
1.2. The Camera Fiber-Link System
The Camera Fiber-Link System uses a Camera Side Unit and a Frame Grabber Side Unit that are
connected by duplex, multi-mode fiber optic cables, allowing Camera Link video support up to 350
meters (1150 feet) from the host computer with no loss of signal or resolution and without the use
of amplifiers or repeaters of any kind. With industrial enhancements such as a threaded screw-
lock input for standard 5V-12V input power, or for our 12V-24V input power, designed for rugged
industrial environments, the Camera Fiber-Link System is ideal for any application.
CAMERA
®
Conventions Used In This Manual
As you read this manual you will notice certain conventions that bring your attention to important
information. These are Notes and Warnings. Examples are shown below.
Note: Important Notes appear in blue text preceded by a yellow exclamation
point symbol, like this.
A note is meant to call the reader’s attention to helpful information at a point in the text that is
relevant to the subject being discussed.
Warning! Warnings appear in red text, followed by blue text, and preceded by a
red stop sign, like this.
A warning is meant to call the reader’s attention to critical information at a point in the text that is
relevant to the subject being discussed.
BEFORE STARTING ANY PROCEDURE, IT IS RECOMMENDED
THAT YOU READ THE INSTRUCTIONS THOROUGHLY!

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 2 Rev. E, June 2012
CABLING: 50/125 um or 62.5/125 um, LC, SC or ST-type connector
CBL-000001-002M (CAT5)
CBL-000007-002M (MDR-26 M to M)
PWR-000022-R (AC to DC Converter-Standard +5VDC)
Figure 1: Thinklogical®Camera Fiber-Link-4000 Cabling Application Drawing
The Camera Fiber-Link System from Thinklogical®allows the placement of a digital camera up to
350 meters (1150 feet) from the controlling computer without loss of resolution. Traditional copper
cables are typically limited to 10 meters (32.81 feet) or less in such applications.
Each Base or Medium/Full Camera Fiber-Link System includes a transmitter and receiver chassis
connected by multi-mode fiber optic cables at ports L1 and L2.* The Medium/Full System requires
a third, multi-mode fiber optic cable at port L3. The Frame Grabber unit connects directly to the
computer and the Camera unit connects directly to the digital camera, each with a 2 meter
Camera Link MDR-26 male-to-male cable (both included).
Note: 350 meters (1150 feet) is the standard maximum distance for a continuous
50/125, 1000 MHz-km fiber. See Appendix D (pg. 34) for the maximum allowable distances
of other fiber types.
*The multi-mode fibers used with the CFL-4000 must be of equal length.

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 3 Rev. E, June 2012
1.2.1. Thinklogical® Camera Fiber-Link Models
Part Number
Description
CFL-3000
CFL-000S03-SCRX
Camera Fiberlink 3000, Frame Grabber, Single Mode, SC/APC
CFL-000S03-SCTX
Camera Fiberlink 3000, Camera, Single Mode, SC/APC
VOP-S05
Camera Fiberlink 3000 Optics Option for TX or RX, Single Mode, Dual Fiber, 40km
CFL-000M03-LCRX
Camera Fiberlink 3000, Base Frame Grabber Side, Multi-Mode, LC
CFL-000M03-LCTX
Camera Fiberlink 3000, Base Camera Side, Multi-Mode, LC
CFL-000M03-SCRX
Camera Fiberlink 3000, Base Frame Grabber Side, Multi-Mode, SC
CFL-000M03-SCTX
Camera Fiberlink 3000, Base Camera Side, Multi-Mode, SC
CFL-000M03-STRX
Camera Fiberlink 3000, Base Frame Grabber Side, Multi-Mode, ST
CFL-000M03-STTX
Camera Fiberlink 3000, Base Camera Side, Multi-Mode, ST
VOP-M04
Camera Fiberlink 3000 Optics Option for TX or RX, Multi-Mode, Dual Fiber, 50M, 350M or 1000M, LC
VOP-M01
Camera Fiberlink 3000 Optics Option for TX or RX, Multi-Mode, Dual Fiber, 50M, 350M or 1000M, SC or ST
CFL-4000
CFL-000S04-SCRX
Camera Fiberlink 4000, Full Frame Grabber, Single Mode, SC/APC
CFL-000S04-SCTX
Camera Fiberlink 4000, Full Frame Grabber, Single Mode, SC/APC
VOP-S05
Camera Fiberlink 4000 Optics Option for TX or RX, Single Mode,3 Fibers, 40km
CFL-000M04-LCRX
Camera Fiberlink 4000, Full Frame Grabber Side, Multi-Mode, LC
CFL-000M04-LCTX
Camera Fiberlink 4000, Full Camera Side, Multi-Mode, LC
CFL-000M04-SCRX
Camera Fiberlink 4000, Full Frame Grabber Side, Multi-Mode, SC
CFL-000M04-SCTX
Camera Fiberlink 4000, Full Camera Side, Multi-Mode, SC
CFL-000M04-STRX
Camera Fiberlink 4000, Full Frame Grabber Side, Multi-Mode, ST
CFL-000M04-STTX
Camera Fiberlink 4000, Full Camera Side, Multi-Mode, ST
VOP-M05
Camera Fiberlink 4000 Optics Option for TX or RX, Multi-Mode, 3 Fibers, 50M, 350M or 1000M, LC
VOP-M02
Camera Fiberlink 4000 Optics Option for TX or RX, Multi-Mode, 3 Fibers, 50M, 350M or 1000M, SC or ST
CFL-5000
CFL-000S05-SCRX
Camera Fiberlink 5000, Industrial Frame Grabber, Single Mode, SC/APC
CFL-000S05-SCTX
Camera Fiberlink 5000, Industrial Frame Grabber, Single Mode, SC/APC
VOP-S08
Camera Fiberlink 4000 Optics Option for RX, Single Mode, 3 Fibers, 40km
CFL-000M05-LCRX
Camera Fiberlink 5000, Industrial Dual Base Frame Grabber Side, Multi-Mode, LC
CFL-000M05-LCTX
Camera Fiberlink 5000, Industrial Dual Base Camera Side, Multi-Mode, LC
CFL-000M05-SCRX
Camera Fiberlink 5000, Industrial Dual Base Frame Grabber Side, Multi-Mode, SC
CFL-000M05-SCTX
Camera Fiberlink 5000, Industrial Dual Base Camera Side, Multi-Mode, SC
CFL-000M05-STRX
Camera Fiberlink 5000, Industrial Dual Base Frame Grabber Side, Multi-Mode, ST
CFL-000M05-STTX
Camera Fiberlink 5000, Industrial Dual Base Camera Side, Multi-Mode, ST
VOP-M05
Camera Fiberlink 5000 Optics Option for TX or RX, Multi-Mode, 3 Fibers, 50M, 350M or 1000M, LC
VOP-M02
Camera Fiberlink 5000 Optics Option for TX or RX, Multi-Mode, 3 Fibers, 50M, 350M or 1000M, SC or ST

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 4 Rev. E, June 2012
CFL-6000
CFL-000S06-SCRX
Camera Fiberlink 6000, High Speed Dual Base Frame Grabber, Single Mode, SC/APC
VOP-S15
Camera Fiberlink 4000 Optics Option for TX or RX, Single Mode, 4 Fibers, 40km
CFL-000M06-LCRX
Camera Fiberlink 6000, High Speed Dual Base Frame Grabber Side, Multi-Mode, LC
CFL-000M06-SCRX
Camera Fiberlink 5000, High Speed Dual Base Frame Grabber Side, Multi-Mode, SC
CFL-000M06-STRX
Camera Fiberlink 5000, High Speed Dual Base Frame Grabber Side, Multi-Mode, ST
VOP-S17
Camera Fiberlink 6000 Optics Option for TX or RX, Multi-Mode, 4 Fibers, 50M, 350M or 1000M, LC
VOP-S16
Camera Fiberlink 6000 Optics Option for TX or RX, Multi-Mode, 4 Fibers, 50M, 350M or 1000M, SC or ST
Table 1: Available Models
To complement its line of Camera Fiber-Link extenders, Thinklogical®also offers high perform-
ance USB 2.0 and Firewire 800 Camera Extenders. To contact a Thinklogical®sales represent-
ative for details, see the “How to Contact Us” section of this manual (pg. 22).
1.2.2. Increased Security
Thinklogical’s®Camera Fiber-Link Systems are designed for high-resolution camera extension
applications. The ability to position the cameras far from the CPU allows better control and
security for your source equipment, which is especially important in applications where the
cameras must be located in harsh, industrial or non-secured environments.
Remote Mounting
Each Camera Fiber-Link module can be used as a desk top or wall-mounted
device. Mounting centers are provided with keyhole slots.
(For vertical wall-mounting, it is recommended that you orient the unit with
the fiber cables and power connector at the top and MDR-26 and RJ45
connectors at the bottom.)
A mounting template is provided in Appendix D (pg. 34) for your convenience.
1.2.3. Class 1 LASERs
The Camera Fiber-Link system is designed and identified as a Class 1 LASER product.
CLASS 1 LASERS do not require any special
precautions under conditions of normal use.

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 5 Rev. E, June 2012
2. Product Features
2.1 System Features
Each Camera Fiber-Link System includes the following features:
Supports all Camera-Link base (to full) configurations with pixel clocks 20-85 MHz
Supports 1 dual-base or 2 individual-base cameras (CFL-5000 and CFL-6000)
Fiber Count: CFL-3000 –2 fibers
CFL-4000 –3 fibers
CFL-5000 –3 fibers
CFL-6000 –4 fibers
Extend camera signals up to 350 meters (1150 feet) using standard multi-mode fiber
Transparent Camera-Link® operation
Compact design: Units are self-contained and do not require user adjustments
HOUSING DIMENSIONS: 8.875”long x 5.44”wide x 1.19”high
(225.425 mm x 138.13 mm x 30.16 mm high)
Signal transmission via fiber optic cable –no RF interference
Serial Port (RJ45) with RS-232 Interface
Class 1 laser product
Screw lock (threaded) power connector
Chassis ground post
Compatible with user’s own DC input
Customer supplied power 5V-12V
Power Enhancement Kit (optional)
Customer supplied power 12V-24V
Industrial Enhancement Kit (optional)
DIN rail connectors for mounting
Indicator LEDs
The Green LED near the power connector is lit when appropriate power is
connected to the power in port.
The Red LED is lit solid (near the camera link connectors) when there is a loss of
signal on the fiber.
The Red LED blinks if the fiber is installed properly but there is no clock from the
camera present.
The Red LED is OFF when the unit is receiving appropriate signals.

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 6 Rev. E, June 2012
2.2. Hardware Features
2.2.1. CFL-3000
The CFL-3000 Extender supports camera signals and serial connections (both the SerTFG and
SerTC within the MDR cable, and three pairs of RS-232 lines). The CFL-3000 supports Base
configurations and requires two fibers. Each unit is housed in a compact, metal enclosure
(7.00”x 5.44” x 1.19”).The CFL-3000 is available with SC-, ST- or LC-type fiber optic connectors.
L1►
L2◄
CAMERA
CAMERA FIBER-LINK®
Digital Camera
Extension System CFL- 3000
HI-SPEED BASE
FRAME GRABBER SIDE
Powered by
MRTS Technology
FRAME
GRABBER SERIAL
L2►
L1◄
CAMERA
CAMERA FIBER-LINK®
Digital Camera
Extension System CFL- 3000
HI-SPEED BASE
CAMERA SIDE
Powered by
MRTS Technology
CAMERA SERIAL
Extend Distribute Innovate ®
Extend Distribute Innovate ®
Figure 2: CFL-3000 Camera Side (CFL-000M03-SCTX) and Frame Grabber Side (CFL-000M03-SCRX)

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 7 Rev. E, June 2012
2.2.2. CFL-4000
The CFL-4000 Extender supports camera signals and serial connections (both the SerTFG and
SerTC within the MDR cable, and three pairs of RS-232 lines). The CFL-4000 supports
Full/Medium/Base configurations and requires three fibers. Each unit is housed in a compact,
metal chassis (7.00” x 5.44” x 1.19”).The CFL-4000 is available with SC-, ST- or LC-type fiber
optic connectors.
CA ME R A
CAMERAFIBER-LINK®
DigitalCamera
ExtensionSystemCFL-4000
L1►
L2►
SERIAL
HI-SPEEDBASE
FRAMEGRABBERSIDE
FRAME
GRABBER
L3◄
BASE
FRAME
GRABBER
MEDIUM/FULL
/MEDIUM/FULL
Extend Distribute Innovate ®
CAMERA
CAMERAFIBER-LINK®
DigitalCamera
ExtensionSystemCFL-4000
HI-SPEEDBASE
CAMERASIDE
CAMERA
L2◄
L1◄
SERIAL
L3►
CAMERA
MEDIUM/FULL BASE
/MEDIUM/FULL
Extend Distribute Innovate ®
Powered by
MRTS Technology
Powered by
MRTS Technology
Figure 3: CFL-4000 Camera Side (CFL-000M04-SCTX) and Frame Grabber Side (CFL-000M04-SCRX)

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 8 Rev. E, June 2012
2.2.3 CFL-5000
The CFL-5000 Extender supports camera signals and serial connections (both the SerTFG and
SerTC within the MDR cable, and three pairs of RS-232 lines). The CFL-5000 supports one or two
base Camera-Link cameras or one dual-base Camera-Link camera configurations. Each unit is
housed in a compact, metal enclosure (7.00” x 5.44” x 1.19”).The CFL-5000 is available with SC-
(standard), ST- or LC-type fiber optic connectors.
C A M E RA
L1►
L2►
SERIAL
FRAME
GRABBER
L3◄
BASE 1
FRAME
GRABBER
BASE 2
DigitalCamera
ExtensionSystemCFL-5000
HI-SPEEDBASE
FRAMEGRABBERSIDE
DUAL
CAMERAFIBER-LINK®
Extend Distribute Innovate ®
CAMERA
CAMERA 1 SERIAL
CAMERA 2
CAMERAFIBER-LINK
DigitalCamera
ExtensionSystemCFL-5000
CAMERASIDE
HI-SPEEDBASE
DUAL
L2◄
L1◄
L3►
®
Extend Distribute Innovate ®
Powered by
MRTS Technology
Powered by
MRTS Technology
Figure 4: CFL-5000 Camera Side (CFL-000M05-SCTX) and Frame Grabber Side (CFL-000M05-SCRX)
Each CFL-5000 configuration requires three fibers. The Camera Side Unit receives data from
each camera and converts the data into optical signals. These signals are sent to the CFL-5000
Frame Grabber Side Unit, which in turn converts the optical signals into video data and sends
them to the one dual-base frame grabber (CPU).

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 9 Rev. E, June 2012
2.2.4. CFL-6000
The CFL-6000 Dual Camera Fiber-Link Receiver is a unique component designed for users who
have two cameras in different locations and where space is a concern. The Dual CFL-6000 Frame
Grabber receives optical data from two CFL-3000 Camera Side transmitters (over two optical
fibers each) and converts them back into video data to send out to a frame grabber base (CPU).
Each unit is housed in a compact, metal enclosure (7.00” x 5.44” x 1.19”).The CFL-6000 is
available with SC- (standard), ST- or LC-type fiber optic connectors.
CAMERA 2
L2 ◄
L1 ►
SERIAL
FRAME
GRABBER
BASE 1
FRAME
GRABBER
BASE 2
L1 ►
L2 ◄
CAMERA 1
Upper Connector Lower Connector
Extend Distribute Innovate ®
CAMERA
®
CAMERA FIBER-LINK®
Digital Camera
Extension System CFL- 6000
HI-SPEED DUAL BASE
FRAME GRABBER SIDE
Powered by
MRTS Technology
Figure 5: CFL-6000 Frame Grabber Side (CFL-000M06-SCRX)
2.2.5. Power Enhancement Kit (Optional)
The entire line of Thinklogical®Camera Fiber-Link Extenders features industrial enhancements,
including a screw lock (threaded) input-power connector designed to meet the needs of a rugged
industrial environment. The CFL-5000 and CFL-6000 models are available with input power
ranges of 5-12V (standard) or 12-24V (industrial). Users can also choose to use their own DC
input. A chassis ground post is included.
2.2.6 DIN Rails (Optional)
Each unit features DIN rail connectors for easy mounting, making it is possible to position your
cameras in any setting while keeping the computer in a secure location. (A mounting template is
included in Appendix D, pg. 34 for your convenience.)

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 10 Rev. E, June 2012
2.3. Technical Specifications
Each Thinklogical®Camera Fiber-Link System is designed to the following specifications:
Electrical Cable
(supplied with
system)
CFL-3000:(1) CBL000007-002MRMDR-26 male cable, 2 meters
(1) KIT-000013 CAMERALINK W/RJ45 adapter/cable kit
CFL-4000:(2) CBL000007-002MR MDR-26 male CABLE, 2 meters
(1) KIT-000013 CAMERALINK W/RJ45 adapter/cable kit
CFL-5000:(2) CBL000007-002MRMDR-26 male CABLE, 2 meters
(1) KIT-000013 CAMERALINK W/RJ45 adapter/cable kit
CFL-6000:(2) CBL000007-002MRMDR-26 male CABLE, 2 meters
(1) KIT-000013 CAMERALINK W/RJ45 adapter/cable kit
KIT-000013 contains the following:
(1) ADP-000007 DB9M TO RJ45F Adapter
(1) ADP-000008 DB9F TO RJ45F Adapter
(2) CBL000001-002MR CAT5 cable assembly, 2 meters
For Adapter Pin-outs, see Appendix B, pg. 32.
Serial
RJ45 (DB9M to RJ45 and DB9F to RJ45 adapters included)
Protocol
Camera Link compliant (supports base/medium/full configurations)
Indicators
Two LEDs on each Camera Fiber-Link module:
Loss of Signal [LOS] (Red ON if no signal)
(Red BLINKS if no camera is connected)
(Red OFF for good connection)
Power (Green ON when power is applied)
Optical Cable
Fiber Count:
CFL-3000 (Base): 2
CFL-4000 (Full/Medium/Base): 3
CFL-5000 (Dual Base): 3
CFL-6000 (Dual Base RX): 4
Fiber Type: Multi-mode, 50/125um or 62.5/125um SC-type connectors
Fiber Connector Type: SC Standard / ST or LC Optional
Maximum Fiber Distance: See Appendix C, pg. 33
(Fiber Cable is either customer-supplied or ordered from Thinklogical)

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 11 Rev. E, June 2012
LASER Output
850 nanometers
Operating Temp
and Humidity
0 to 50°C (32 to 122°F), 5 to 95% RH, non-condensing
Pixel Clock
20 to 85 MHz
Bit Assignments
CFL-3000/CFL-5000/CFL-6000: Supports Base Configurations
CFL-4000: Supports Full/Medium/Base Configurations
Camera/Frame
Grabber Connector
CFL-3000: Camera Side -- (1) MDR-26 (supports Base only)
Frame Grabber Side -- (1) MDR-26 (supports Base only)
CFL-4000: Camera Side -- (2) MDR-26 (supports Full/Medium/Base)
Frame Grabber Side -- (2) MDR-26 (supports Full/Medium/Base)
CFL-5000: Camera Side -- (2) MDR-26 (supports Base only)
Frame Grabber Side -- (2) MDR-26 (supports Base only)
CFL-6000: Camera Side 1-- (1) MDR-26 (supports Base only)
Camera Side 2 -- (1) MDR-26 (supports Base only)
Frame Grabber Side -- (2) MDR-26 (supports Base only)
Dimensions
CFL-3000, CFL-4000, CFL-5000 and CFL-6000:
7.0” x 5.44” x 1.19”
(177.80 x 138.13mm x 30.23mm)
Weights
Weight: 1 lb. per unit
Shipping Weight: 6 lbs.
Power Supply
Standard 5-12V: Supplied universal external power supply equipped with
threaded screw lock connector for each side.
Industrial 12-24V: Supplied universal external power supply equipped
with threaded screw lock connector for each side.
AC Adapter
Standard Version: Wall Mount (PWR-000022-R)
Input 100-240VAC, 50-60Hz
Industrial Version: Desktop (PWR-000033-R)
Input 90-264VAC, 47-63Hz,
DC Current
Camera Side: 1.5A, steady state; 2.5A, peak
Frame Grabber Side: 1.5A, steady state; 2.5A, peak
AC Power
Consumption
Camera Side: Initial Power Draw: 10W
Typical Input Power: 4.0W to 4.5W
Frame Grabber Side: Initial Power Draw: 10W
Typical Input Power: 3.75W to 4.5W
Warranty
12 months from date of purchase.
Extended warranties available at time of purchase.
Table 2: Technical Specifications

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 12 Rev. E, June 2012
3. Connecting the Camera Fiber-Link
3.1 Types of Connections
3.1.1. Fiber Cable
Either two (Base version) or three (Medium/Full version) fiber optic cables will connect the
Frame Grabber Unit (near the CPU) and the Camera Side Unit (near the camera). The
standard simplex and/or duplex, multi-mode fiber cables must be 50 or 62.5 micron, term-
inated with an SC-, ST- or LC-type connector and no longer than 1150 running feet (350
meters). A single-mode fiber version is also available that can extend up to 40 kilometers.
Be careful to not kink or pinch the fiber cable as it is being installed and keep all bend radii to no
less than 3 inches (76.2mm). Be sure to dress the cable to prevent it from being crushed,
pinched or otherwise damaged.
BEFORE STARTING ANY PROCEDURE, IT IS RECOMMENDED
THAT YOU READ THE INSTRUCTIONS THOROUGHLY!
Note: For CFL- 4000 and CFL- 5000 Units it is necessary that the multi-mode
fiber on L1 and L2 to be of equal length.
Note: The Camera Fiber-Link is available with SC-, ST- or LC-type fiber
connectors upon request.
Note: 350 meters (1150 feet) is the standard maximum distance for a
continuous fiber type of 50/125, 1000MHz-km. See Appendix D (pg. 34) for
maximum distances of other fiber types.
3.1.2. Digital Video Camera Side
The Camera Side unit connects to your video camera using a supplied MDR-26 male-to-male
cable (CBL-000007-002M). The Base version includes one cable and the Medium/Full version
includes two.
3.1.3. Digital Video Frame Grabber Side
The Frame Grabber Side unit connects to your controlling computer’s Frame Grabber with a
supplied MDR-26 male-to-male cable (CBL-000007-002M). The Base version includes one
cable and the Medium/Full version includes two.
3.1.4. Serial Port
Both the Camera Side unit and the Frame Grabber Side unit have a serial port (RJ45
connector). This RS-232 interface connects to any external sensor, external lighting, etc., using

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 13 Rev. E, June 2012
the supplied CAT5 Cable Assembly (CBL-000001-002M). A DB9M to RJ45F and a DB9F to
RJ45F adapter is included with KIT-000033 (Fig. 6, pg. 13).
The serial port on the CFL-6000 varies from the CFL-3000, CFL-4000, and CFL-5000 systems
in that serial data from the PC is broadcast to both Camera Side units (transmitters). However,
serial data to the PC only comes from Camera 1 on the Camera Side (transmitter 1).
Serial Port communications are sampled at approximately 32 MHz going from the
Camera to Frame Grabber (RX, DSR, CTS)
Serial Port communications are sampled at 97 MHz going from the Frame grabber to the
Camera (RTS, TX, DTX).
The pin-outs for the Serial Port (RJ45 connector) are as follows:
Figure 6: Diagram showing the serial connections used as data terminal connections
and the included DB9 to RJ45 adapters. Other uses are also possible using each signal
to control a function at the camera end, such as lighting, sensors, etc.

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 14 Rev. E, June 2012
3.1.5. Camera Control
Communications from the Camera to the Frame Grabber, SerTFG—Differential pair with serial
communications to the frame grabber, are sampled at 97 MHz.
Communications from the Frame Grabber to the Camera, SerTC—Differential pair with serial
communications to the camera, are Sampled at 97 MHz.
Camera Controls 1-4 (CC1, CC2, CC3 and CC4) are sampled at 97 MHz.
3.2. AC Power
3.2.1. Standard Version: 5V-12V
Separate wall-pack AC-to-DC converters (Part Number PWR-000022-R) are included. A power
jack is provided on both units and accepts the +5VDC input. The green power LED will light
when the unit is receiving power.
The AC wall pack has a universal power rating (100-240 VAC, 50-60 Hz) and comes with slip-
on, interchangeable adapters for various AC power receptacles found throughout the world.
Use the appropriate AC power wall plug adapter for your country/location.
Figure 7: A 5V–12V Power Supply is provided with each Camera Fiber-Link unit.
Each comes with three international AC power wall plug adapters.

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 15 Rev. E, June 2012
3.2.2 Industrial Version: 12V-24V
For the Industrial Power Input Option, separate desktop AC-to-DC converters (Part Number
PWR-000033-R) are included. A power jack is provided on both units and accepts the +12VDC
input. The green power LED will light when the unit is receiving power.
The AC desktop power pack has a universal power rating (90-264 VAC, 47-63 Hz) and is also
supplied with a country-specific, industry standard AC Power Cord.
A separate +5V (CON-000120-R) or +12V (CON-000119-R) threaded screw-lock connector
is available for customers who prefer to use their own power source.
Figure 8: Two 12V–24V Desktop Power Supplies are provided with each Industrial
Version Camera Fiber-Link System.
4. Order of Installation Events
The following pages contain Quick Start Guides for each of the four CFL models available
from Thinklogical®. Each guide contains specific information about the contents of your
Camera Fiber-Link System, as well as order of installation events and detailed connection
instructions.
BEFORE STARTING ANY PROCEDURE, IT IS RECOMMENDED
THAT YOU READ THE INSTRUCTIONS THOROUGHLY!

Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual 16 Rev. E, June 2012
4.1. CFL-3000 (Figure 9)