Beko BKK 2168 User manual

BKK2168
Hairdryer with
Ionizer Technology
User's Manual

This product has been produced in
environmentally friendly, modern
facilities

Dear customer,
We would like our product, which is manufactured in modern facilities and which has
been subject to detailed quality control process, to provide you with the highest
productivity. Therefore, we would like you to read this manual thoroughly before you
start using the product
and we would like you to keep it as a reference.
<r!>C€

CONTENTS
Part 1 : Safety Warning / 3
Part 2 : Technical Aspects of
your machine / 4
Part 3 : Using your machine / 5 - 8
Part 4 : Maintenance and Cleaning / 9
2

Part 1: Safety Warning
Please read the user's manual carefully before using your hairdryer and keep the manual for future reference. If you give
the hairdryer to a friend please give the user’s manual also.
Take out all parts of the product from the box before use. Do not use hairdryer if accessories are missing, broken or damaged
and make sure that the product is working before throwing away the packing box.
Do not use your hairdryer for any other purpose that’s not mentioned in this manual.
Do not use your hairdryer in the bathroom
shower or bath tube with water. Do not place
your hairdryer on wet surfaces or material. Do
not hold with wet hands.
When the hairdryer is used in a bathroom, unplug
it after use since the proximity of water present
a hazard even when the hairdryer is switched
off.
H W hen the hairdryer is not used, make sure that
the on/off switch is closed and in “0” position
and unplug the product. For additional protection
the installation of a residual current device
(RCD) with a rated residual operating current
not exceeding 30mA is advisable in the electrical
circuit supplying the bathroom.
Do not use the hairdryer if it is broken, if the
cord or plug is damaged. Hair spray, spray gel
all include flammable substances. Do not spray
your hair when the product is on.
The hairdryer has termostat for your own safety
WH and to protect the product itself. In case that
■■ the rear filter cover or the airflow in the front
(may be set againts the head) is blocked the
product will automaticlly turn off because of
the overheating. After the rear filter is opened
and the product gets cooler the hairdryer will
start working. Make sure that the rear filter
cover is not blocked with dust, hair or similar
materials. Clean the product as shown in
Manual - Parts 4.
H D o not use any other accessories other than
the parts given with the hairdryer. After use
leave the product for cooling.
When your children use the hairdryer, give
information to your child about security warnings.
Do not let small children to use the hairdryer.
3

Part 2: Technical Aspects of Your Machine
m Body Complete
Rear Filter
| Rear Filter Cover
E] On/Off - Speed Setting
Efl Heat Setting
Cool Shot
| Ionizer (Included in the body)
KB Hanging Loop
KB Supply Cord
KE1 Air Concentrator
m Diffuser
Power
Voltage
Current
Cable length
Blow out temperature
Air flow
Isolation class
Water penetration class
Type
2000 W
230 V 50 Hz.
10 A
1.90 m
95°C (5 cm distance under 24°C)
1.40 m 3 / minute
11
Normal
Hand use / Automatic thermostat
Note: The values indicated on the indicators of the
product or on other printed documents that are provided
with the machine are obtained at laboratory surroundings
accordings to related standarts. These values may change
according to usage of the machine and the conditions
of the environment in which the machine is used.
4

Part 3: Using Your Machine
WARNING; Follow the Security Warnings in Part 1.
How to operate
There are 3 switches on your hairdryer for SPEED, HEAT and COOL
SHOT setting.
On-Off / Speed Setting (Figure 1/4 Component)
The switch has 3 positions.
0 Turn Off
1 Normal
2 Fast Blowing
For strong, thick hair choose position 2. For fine hair and during style
setting use position 1. turn off your hairdryer by setting the switch to
“0” position. (Figura 2)
Heat Setting (Figure 1/5 Component)
The switch has 3 positions.
0 Cool
I Warm
II Hot
For quick drying choose position (\\)
For style setting choose position (*)
After style setting to smooth the hair choose cool position (0).
(Figure 3)
Cool Shot
Blows out cool air when it’s pressed in. When released the cool shot
comes out and the hairdryer blows out air according to the heat position.
(Figure 1/6. Component)
5

Part 3: Using Your Machine
£
Ionizer
Ionizer emits millions of charged particles (called ions) that bond to your hair, breaking down moisture molecules.
The extraordinary ion therapy completly dryes and moisturizes your hair.
This super efficient drying method add, softness and body with naturel shine and manageability.
Ionizer disperses negative ions to eliminate frizz and result in smooth hair.
Featuring of ion technology, gives less harm to hair with very little heat.
The best of all the ions places in the hair and conditiones your hair (Figure 4)
Figure 4

Part 3: Using Your Machine
Drying and Style setting
Dry your hair with a towel after shower. Take out the air
concentrator for quick drying (Figure 5) and set the switch
to FAST (2) and HOT position.
Use the accessories to set style.
Set the switch to NORMAL (1) position before your hair
gets dry.
AIR CONCENTRATOR (Figure 5)
For faster and more easy style setting, use the air concentrator
which condense the air at the target area.
While making straight hair and styling (e.g. with round brush),
if you apply cold air using cool shot after ~ 15 seconds of
warm air, you will have a more long lasting style. Cool Shot
function (a) when released, the cool shot comes out and the
hairdryer automatically blows out air according to the heat
setting position.
7

Part 3: Using Your Machine
DIFFUSER (Figure 6)
Put on the diffuser to give a natural look and dry your hair with perm, starting from the origins. After using an accesory,
wait for cooling before taking off from the hairdryer or take off with the help of a dry towel. Turn off your hairdryer after
using. Set the on/off switch in “0” position.
Figure 6
Do not wrap the supply cord around the hairdryer.
If you find any damage on the supply cord contact with the authorized technical service.
8

Part 4: Maintenance and Cleaning
• When the hairdryer is not used and before cleaning turn off and unplugged the product and leave for cooling.
• Do not ever wash your hairdryer. Clean the outcover with a soft, damp piece of cloth. Do not use substances which may
damage the product.
• Clean the rear filter after a while of use. Rear filter is fixed to the body with a special sliding bar system. Pull back the
lock finger at the bottom of the rear filter cover and take out the rear filter cover and then the filter. Clean the dirt on the
filter and filter cover with water. Take out hairs. Before assembling to the body again make sure that it is completely dry.
Do not ever run the hairdryer without drying the filter and filter cover. Place the filter to its housing. Place the filter slot to
filter slot housing on the top of the rear filter cover. Push in the filter lock at the bottom of the rear filter cover and put on
the cover. (Figure 7)
• Do not use your hairdryer close to the bath tube, basin or any other vessel with water.
Maintenance
Switch off the product after use. Unplug and leave for cooling.
Your product has a special desinged hanging loop appropriate
maintenance (Figure 1 / Part No.7)
Figure 7
9