
9 / EN
Cooker Hood / User Manual
3.3.1 Controlling the appliance
B
A C D
KEY FUNCTION
A : Light On / Off You can illuminate the cooking
area by pressing this key.
B : 1. Stage
Button
You can start your hood at spe-
ed level 1 by pressing this key.
When you press this key again
to switch off the appliance, spe-
ed level indication on the display
disappears.
C : 2. Stage
Button
You can start your hood at spe-
ed level 2 by pressing this key.
When you press this key again
to switch off the appliance, spe-
ed level indication on the display
disappears.
D : 3. Stage
Button
You can start your hood at spe-
ed level 3 by pressing this key.
When you press this key again
to switch off the appliance, spe-
ed level indication on the display
disappears.
3.2 Energy efficient usage
•When using your appliance, adjust the speed
settings according to vapour and odour inten-
sity, in order to save energy.
•Use low speeds (1-2) under normal conditions,
and high speed (3) for intense odour and vapour.
•The lamps on the hood are placed for illuminat-
ing the cooking area.
•Using them for environmental lighting shall
cause unnecessary energy expenditure and in-
sufficient lighting.
3.3 Operating the hood
•Your appliance contains a motor that has vari-
ous speeds.
•For better performance, we recommend using
low speeds under normal conditions and high
speeds in cases of strong odours and intense
vapour.
•You can start your appliance by pressing on the
desired speed setting button. (B, C, D)
•You may illuminate the cooking area by pressing
the lamp. (A)
3.4 Automatic stop
Your appliance has Automatic Stop feature, enab-
ling it to ventilate for a bit more and remove the
unwanted odours and vapour inside the environ-
ment and turn off automatically after the cooking
is done. To enable Automatic Stop feature, press
the any speed stage button (B, C, D) on the control
panel for longer than 2 seconds; the 15-minute ti-
mer function shall be activated.When the automa-
tic stop feature is active, pressing the same speed
button shall disable the automatic stop function
and the appliance’s motor shall stop. This featu-
re is disables when you switch between different
speed stages. If you want the appliance to stop
automatically, you need to enable the automatic
stop feature again.
3.5 Replacement of Lamp
MAX 3 W
Make the electrical connections of the appliance.
Your appliance uses 3W spot LED lamp. For rep-
lacing the lamps, push downwards on the holder
3
Using the appliance