10 / EN Cooker Hood / User Manual
when you provide sufficient air intake
to it.
•Set your device to the intense suction
power level before the formation of
steam, in cases where you know that
the dense steam will occur. So, you
reduce energy consumption by using
your device for a shorter time as it will
have a sufficient air intake.
•Keep the lids of the cookware closed to
reduce the steam evolving.
3.3 Operating the hood
•Hood is equipped with a motor having
various speed settings.
•For a better performance, we advise
you to use low speeds in normal condi-
tions, and high speeds when smell and
vapors are intensified.
•You can start the hood by pressing the
desired speed level key.(1,2,3 )
•You can illuminate the cooking area by
pressing the light key.( )
3.4 Lamp replacement
GU10
1
2
1
2
Symbol
Max. 3 W
A
Symbol
Bulb installation
Bulb dismantling
3.1 Use of the rocker switch
1 2 3 0
The hood is equipped with a mechanical
control.
•Pressing the “0” - disables the hood.
•Pressing the “1” - to turn the hood with
a minimum speed.
•Pressing the “2” - turns the hood with
an average speed.
•Pressing the “3” - turns the hood at
maximum speed.
Higher speed means more air flow.
•Press the button - to turn on the
lights. Repeat pressing the button to
turn off the lighting.
3.2 Efficient use in terms of
energy saving
•When using your appliance, adjust the
speed settings according to vapour and
odour intensity, in order to save energy.
•Use low speeds (1-2) under normal
conditions, and high speed (3) and
boost mode for intense odour and va-
pour.
•The hood is equipped with lamps in
order to illuminate the cooking area.
•Using them for environmental lighting
shall cause unnecessary energy ex-
penditure and insufficient lighting.
•For your device to consume less en-
ergy, run it at a low speed level.
•Your device will reduce energy con-
sumption as it will run more efficiently
3 Using the appliance
