Belkin Bluetooth USB Adapter F8T012 User manual

Bluetooth™ USB Adapter
F8T012 - F8T013
UK
FR
DE
NL
ES
IT
F8T012 - F8T013
Quick Installation Guide
Guide d’installation rapide
Installationsanleitung
Beknopte installatiehandleiding
Guía de instalación rápida
Guida di installazione rapida
Connect your peripherals and computing devices, without cables
Connectez vos périphériques et appareils informatiques sans utiliser de câble
Verbindet Ihre Peripherie- und Computergeräte – ganz ohne Kabel
Verbind uw randapparatuur en computers met elkaar, zonder kabels
Conecte sus periféricos y dispositivos informáticos sin necesidad de cables
Per collegare tra loro i vostri computer e le vostre periferiche senza l’utilizzo di cavi.

Bluetooth™ USB Adapter
F8T012 - F8T013
Connect your peripherals
and computing devices, without cables
Quick Installation Quide
UK
F8T012 - F8T013

Introduction
PC System Requirements
• PC-compatible computer, CPU speed of 200MHz or above
• Memory: 64MB or above, 128MB recommended
• One available USB port, USB 1.1 standard
• Windows® 98 SE, Me, 2000, and XP
Mac® System Requirements
• One available USB port, USB 1.1 standard
• Mac OS® X v10.3 and higher*
Product Contents
• Bluetooth USB Adapter
• CD-ROM for installation software and documentation
• User Manual
• Quick Installation Guide
*Mac OS X driver and software provided by Apple®.
1

2
2
Step 1: Software Setup
Software Setup for Windows 98 SE, Me, 2000, and XP
To install the software for the USB Adapter, follow the instructions below:
Note: The installation process for Windows XP may look slightly different from
Windows 98 SE, Me, and 2000.
Note: Do not insert the USB Adapter into the USB port prior to software installation.
1. Insert the software installation CD-ROM
into the PC’s CD-ROM drive.
2. The “Software InstallShield Wizard” window
appears. Click on “Next” to begin the
installation process.

32
32
3. Choose “I accept the terms in the
license agreement” to accept the
license agreement. Click on “Next”
to continue.
4. Specify the location where the software
files will be installed on your hard drive.
It is recommended that you install
the software in the default directory
“C:\Program Files\belkin\Bluetooth\
Software\”. Click on “Next” to continue.
Step 1: Software Setup

4
4
Step 1: Software Setup
5. Confirm that the device software
is ready to be installed and click
on “Install”.
6. The InstallShield Wizard will begin to
install the Belkin Bluetooth Software.
This may take several minutes.

54
54
Step 1: Software Setup
7. During the installation process you may be prompted to insert your USB Adapter.
If your USB Adapter is not plugged into your computer at this time, you may insert
it into an available USB 1.1-compliant port on your desktop or notebook computer,
then click “OK” to continue. Click on “Cancel” to continue installation without the
Bluetooth device inserted. Refer to the “Hardware Installation” section of this User
Manual for instructions for installing the hardware.
Note: If at any time during the installation process you receive a “Driver Signature
Notice”, click “OK” to continue the installation process.

6
6
Step 1: Software Setup
8. Confirm the completion of the software installation; click “Finish” and restart the
system if prompted to do so.

76
76
Step 2: Hardware Setup
Hardware Setup for Windows 98 SE, Me, 2000, and XP
Follow these instructions to install your USB Adapter on your PC.
Note: Your USB Adapter is sensitive to static electricity, which can damage its delicate
electrical components. To protect your device, always touch the metal chassis of your
computer before handing the USB Adapter. This will ground any potential electrostatic
discharge. Avoid touching the metal connector when handling the USB Adapter. Dry
weather conditions or walking across carpeted floors may cause you to acquire an
electrostatic charge.
1. Connect the USB Adapter directly to an
available USB A-type connector on your
desktop or notebook computer. Your
system should register a new USB device
found.
2. Choose “Install from a list or specific
location”; then click “Next”.

8
8
Step 2: Hardware Setup
3. Browse for the location of the device
driver “:\Program Files\Belkin\
Bluetooth\Software\bin\” then
click “Next”.
4. If you receive the following “Hardware
installation notice”, click on “Continue
Anyway” to continue with the
installation process.

98
98
Step 2: Hardware Setup
5. A window will appear that confirms the completion of the hardware installation;
click on “Finish” to complete the installation process.

10
10
Step 3: Uninstalling the Software
Uninstalling the Software for Windows 98 SE, Me, 2000, and XP
Follow these instructions to uninstall your USB Adapter on your PC.
1. Insert the CD-ROM included with your USB Adapter.
2. This “InstallShield Wizard” should automatically load.
If it does not load, explore the CD and run the “Setup.exe” file.
3. The “InstallShield” window should now appear.
Click “Next” to continue with the uninstall process.

10
10

Bluetooth™ USB Adapter
© 2006 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.
The Bluetooth name and the Bluetooth trademarks are owned by Bluetooth SIG, Inc. and are used by Belkin Corporation under
license. Mac, Mac OS, and Apple are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
Belkin Corporation
501 West Walnut Street,
Compton, CA 90220-5221, USA
[phone]
[phone] fax
Belkin Ltd.
Express Business Park, Shipton Way
Rushden NN10 6GL, United Kingdom
[phone]
[phone] fax
Belkin B.V.
Starparc Building, Boeing Avenue 333
1119 PH Schiphol-Rijk, The Netherlands
[phone]
[phone] fax
Belkin GmbH
Hanebergstrasse 2
80637 Munich, Germany
[phone]
[phone] fax
Belkin SAS
130 rue de Silly
92100 Boulogne-Billancourt, France
[phone]
[phone] fax
Belkin Nordic
Knarrarnäsgatan 7
164 40 Kista, Sweden
[phone]
[phone] fax
Belkin Tech Support
Europe: 00 800 223 55 460
P74958ea-B

Adaptateur USB Bluetooth™
F8T012 - F8T013
Connectez vos périphériques et appareils
informatiques sans utiliser de câble
Guide d’installation rapide
FR

Introduction
Configuration requise pour PC
• Ordinateur compatible PC, vitesse de processeur de 200 MHz ou plus
• Mémoire : 64 Mo ou plus, 128 Mo recommandé
• Un port USB libre (norme USB 1.1)
• Windows® 98 SE, Me, 2000 et XP
Configuration requise pour Mac®
• Un port USB libre (norme USB 1.1)
• Mac OS® X v10.3 et versions ultérieures*
Contenu de l’emgallage
• Adaptateur USB Bluetooth
• CD-ROM pour le logiciel d’installation
et la documentation
• Manuel de l’utilisateur
• Guide d’installation rapide
*Pilote et logiciel Mac OS X fournis par Apple®.
1

2
2
Étape 1 : Installation du logiciel
Installation du logiciel pour Windows 98 SE, Me, 2000 et XP
Pour installer le logiciel de l’adaptateur USB, procédez comme suit :
Remarque : L’installation sous Windows XP peut être légèrement différente de celles
sous Windows 98 SE, Me et 2000.
Remarque : N’insérez pas l’adaptateur USB dans le port USB avant
l’installation du logiciel.
1. Insérez le CD d’installation des logiciels
dans le lecteur de CD-ROM du PC.
2. La fenêtre « Software InstallShield Wizard
» (Assistant d’installation du logiciel
InstallShield) apparaît. Cliquez sur Suivant
pour commencer l’installation.

32
32
3. Choisissez l’option « I accept the terms
in the license agreement » (J’accepte
les termes du contrat de licence) pour
accepter le contrat de licence. Cliquez
sur Suivant pour continuer.
4. Spécifiez l’emplacement où le logiciel
doit être installé sur votre disque dur.
Il est recommandé de l’installer dans
le répertoire par défaut « C:\Program
Files\Belkin\Bluetooth\Software\ ».
Cliquez sur Suivant pour continuer.
Étape 1 : Installation du logiciel