Belkin F7D7501v1 User manual

User Manual
F7D7501v1 • 8820-01467 Rev. C00
MIRACAST VIDEO
ADAPTER

TABLE OF CONTENTS
Introduction .............................................. 1
Placement for Optimal Performance ............................. 2
Overview................................................. 4
Product Features ............................................ 4
Product Specifications ........................................ 5
Status LED Behavior .......................................... 6
Multipurpose Button .......................................... 7
System Requirements......................................... 8
Package Contents ............................................ 8
Installing and Setting Up the Adapter ....................... 9
Navigating the Miracast Adapter’s Home Screen
with Your Remote ............................................ 19
Miracast Video Adapter’s Interfaces........................ 20
The Miracast Adapter’s User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Advanced Web Interface ..................................... 22
Troubleshooting ......................................... 31
Information.............................................. 34

1
INTRODUCTION
Thank you for purchasing the Belkin Miracast Video Adapter. Now you can take advantage of this great new technology that
lets you watch anything and everything from your mobile device or computer on your big, beautiful, HDTV screen.
Benefits of the Miracast Video Adapter
Your Belkin Home Network will allow you to:
• Share pictures that are saved or taken with your smart device with friends and family
• Play games made for your Android™ device directly on your TV and eliminate strained eyes
• Watch movies and videos on your TV that are saved on your smart device directly
• Browse the Internet on your TV without the need for a smart TV

2
INTRODUCTION
Placement for Optimal Performance
Your wireless connection will be stronger the closer your smart device is to the Miracast Video Adapter. Typical indoor operating
range for your Miracast Video Adapter is up to 50 feet if no obstructions are in the way. In the same way, your connection and
performance will degrade somewhat as the distance between your Miracast Video Adapter and connected device increases. This
may or may not be noticeable to you. As you move farther from your Miracast Video Adapter, performance may decrease. Factors that
can weaken signals simply by getting in the way of your Adapter’s radio waves are metal appliances or obstructions, and walls.
If you have concerns about your Miracast Video Adapter’s performance that might be related to range or obstruction factors,
try moving the connected device to a position between 5 and 10 feet from the Miracast Video Adapter in order to see if
distance is the problem. If difficulties persist, even at close range, please contact Belkin Technical Support.
Note: While some of the items listed below can affect network performance, they will not prohibit your wireless network from
functioning; if you are concerned that your network is not operating at its maximum effectiveness, this checklist may help.

3
INTRODUCTION
1. Placement of your Wireless Router (or Access Point)
Your wireless router may cause interference with the Miracast
Video Adapter, especially if it is a dual-band router.
For optimal performance of the Miracast Adapter, if possible,
try to place it away from your home Wi-Fi® network.
To achieve the best connection for your smart
devices with the Miracast Adapter:
• Your router transmits radio waves that may interfere with
the performance of the Miracast Video Adapter. If possible,
ensure that your Miracast Video Adapter is located on
or close to the outskirts of your Wi-Fi network.
• Try not to place the Miracast Video Adapter (or
smart device) near a cordless 2.4GHz phone.
• Disconnecting your smart device from your Wi-Fi network
can also improve the video performance where possible.
2. Cordless Phone Placement
If the performance of your Miracast Video Adapter is impaired after
attending to the above issues, and you have a cordless phone:
• Try moving cordless phones away from the
Miracast Video Adapter (or smart device).
• Unplug and remove the battery from any cordless phone that
operates on the 2.4GHz band (check manufacturer’s information).
If this fixes the problem, your phone may be interfering.
• If necessary, consider switching to a 900MHz cordless phone.

4
Product Features
The Adapter complies with the Wi-Fi Miracast specification
to communicate with other Wi-Fi Miracast wireless
devices. The Adapter can operate on the 2.4GHz or
5GHz frequency band as 802.11n Wi-Fi products.
• 2.4GHz or 5GHz band operation
• Micro USB 2.0 port to power the Miracast Video Adapter
• WPS™ button for pairing with your smart device
• HDCP 1.0, 2.0 and 2.1
• Easy installation and use
• LED status indicator
OVERVIEW

5
OVERVIEW
Product Specifications
Host Interface: HDMI®
Operating Temperature: 32–131 degrees F (0–40 degrees C)
Storage Temperature: -4–149 degrees F (-20–65 degrees C)
Humidity: Max. 85% (non-condensing)
Maximum Operating Range: Up to 50 ft.*
*Wireless performance may vary depending
on the networking environment.
(a) Power/Status LED
Lights when the Adapter is powered on and flashes when it is active.
(b) Multipurpose Button
Used for Wi-Fi Protected Setup™ handshaking with smart devices.
(c) Micro USB Power Connector
Used to supply power to the Miracast Video Adapter.
(d) HDMI Connector
Part of the Adapter that fits into your TV’s HDMI port.
(a)
(b)
(d)
(c)

6
OVERVIEW
LED Behavior What’s on the TV Screen Indicates
Blinking Green Loading screen Adapter is starting up
Steady Green Instructions to pair device Ready to pair with a smart device
Blinking Green with pause after 2nd blink Instructions to press button Waiting for user to press Multipurpose
button
Blinking Green with pause after 5th blink “Connection in progress” message Attempting to pair with smart device
Steady Green Smart device is being mirrored onto the TV Adapter and smart device have
paired successfully
Status LED Behavior
The LED on the Miracast Video Adapter gives you the status on the current state of the Adapter.
Please consult the table below for a guide to what the different LED behaviors indicate:

7
OVERVIEW
Multipurpose Button
The only button on the Miracast Video Adapter can be used for a variety of purposes. Please consult the table below for each application:
Adapter State Action Duration of Action Result
Adapter is unpowered
(then powered on) Press and hold button Until Firmware Update page appears
Access to Advanced
Web Interface
Adapter is asking user to press
button during pairing Press button 0–5 seconds Adapter will attempt to pair with smart device
Adapter is on its home screen Press and hold button 10+ seconds Restore factory defaults and
restart Adapter

8
OVERVIEW
System Requirements:
• TV with available HDMI port
USB power available (5V 500mA)
• Device with Miracast, Allshare Cast, Screen
Mirroring, or Android Wireless Display support
• HDMI-CEC compatible TV required to
interact with the User Interface
Package Contents:
Miracast Video Adapter
USB Power Cable
HDMI Extension Cable
Quick Installation Guide

9
1. Turn your TV on and power up the Miracast Video Adapter by
connecting the USB cable from the Adapter to
a USB port on your TV or other USB power source
that provides at least 5V, 500mA of power.
Or
INSTALLING AND SETTING UP THE ADAPTER

10
INSTALLING AND SETTING UP THE ADAPTER
3. Set your TV’s source/input selector to the HDMI port you
used to connect the Miracast Adapter in step 2.
2. Connect the Miracast Video Adapter directly into an HDMI
port on your TV. If the Adapter can’t fit into the port due to
its size, try using the HDMI Extension Cable provided.
Note: HDMI port 1 is recommended to ensure your TV’s
remote control ability to communicate with the Miracast
Adapter. Remember your port number for the next step.

11
INSTALLING AND SETTING UP THE ADAPTER
5. On your smart device, go to the settings, then
Wireless & Networks and find Miracast. If it isn’t
already, activate Miracast on your smart device.
Note: Miracast may be called Wireless Display,
Screen Mirroring, AllShare Cast, or something else
depending on the manufacturer. Please consult the
manufacturer’s manual. Here are some examples.
4. Your Miracast Adapter should now start up and
display instructions on your TV screen.

12
INSTALLING AND SETTING UP THE ADAPTER
Motorola
a. Access your phone’s apps by clicking the
icon indicated in the image below.
b. Scroll through your phone’s
applications and select Settings.
c. In your phone’s settings, select the Display option.

13
INSTALLING AND SETTING UP THE ADAPTER
d. Select Wireless display from the list of options. e. Turn Wireless Display to ON and select the
adapter to which you wish to connect.

14
INSTALLING AND SETTING UP THE ADAPTER
Samsung Galaxy
a. Access the drop-down menu by swiping your finger
from the top of your phone’s screen to the bottom.
b. Select AllShare Cast or Screen Mirroring from the menu at the top.
LG Miracast-enabled devices
a. Go to Settings.

15
INSTALLING AND SETTING UP THE ADAPTER
b. Select “More…” from the list of options under Wireless & Networks. c. Select “Miracast” from the selection.

16
INSTALLING AND SETTING UP THE ADAPTER
Google Nexus 4 (Standard Android UI)
a. Access the drop-down menu by swiping your finger from
the top of your phone’s screen to the bottom and tap the
icon in the top right corner of the drop-down menu.
b. Tap the “Wireless Display” option.

17
INSTALLING AND SETTING UP THE ADAPTER
6. In the list of available devices now displayed on your smart device,
select the TV that the Miracast Video Adapter is connected to.
7. If prompted to, please press the button on the
Miracast Video Adapter or if requested, enter the
PIN code that appears on the screen.

18
INSTALLING AND SETTING UP THE ADAPTER
The Miracast Adapter will attempt to pair with your device at this point. 8. If the image on your smart device is now being
mirrored onto your TV, you are done!