Belkin PM01629 User manual

©2008BelkinInternational,Inc.Allrightsreserved.Alltradenamesareregisteredtrademarksofrespectivemanufacturerslisted.PM01629•BG108000
Conserve Energy-Saving Surge Protector with Remote Switch
Quick Start Guide
IMPORTANT – READ BEFORE INSTALLING

Step 1:
Plug equipment into “Always On” outlets.
These outlets are for devices that need continuous power, such as:
• Digitalvideorecorders • Alarmclocks
• Cordlessphones • Wirelessrouters
Wirelessrouters
Cordlessphones
Step 2:
Plug equipment into “Remote Switched” outlets.
Theseoutletsarecontrolledbytheremoteswitchandarefordevices
thatdonotneedconstantpowerorgointostandbymode,suchas:
• Printers • Computermonitors
• Chargers • Televisions
• DVDplayers • Stereosystems
1
2
Printer
ComputerWireless
Router
Monitor
Cordless
Phone
Scanner
Printer
ComputerWireless
Router
Monitor
Cordless
Phone
Scanner
Computers
Monitors
Printers
Scanners
Printer
ComputerWireless
Router
Monitor
Cordless
Phone
Scanner
Printer
ComputerWireless
Router
Monitor
Cordless
Phone
Scanner
Printer
ComputerWireless
Router
Monitor
Cordless
Phone
Scanner
Printer
ComputerWireless
Router
Monitor
Cordless
Phone
Scanner

Step 3:
Plug Conserve power cord into the wall outlet.
Step 4:
Remove the remote switch and wall-mount from
the box.
Mountingscrewsarenotincluded;seeUserGuidefor
wall-mountinstallation.
Remove
before using. Pull
Step 5:
Pull and remove the clear battery tab from the
back of the remote switch.

Step 6:
Firmly press and release the “|” button to turn ON
the “Remote Switched” outlets.
Checktoseeifagreenlightflashesontheremoteswitch.Thiswill
indicatethattheremoteisworking.
HOW TO USE THE
CONSERVE REMOTE SWITCH
Step 9:
When your equipment is off, firmly press and
release the “O” button on the remote switch.
Checktoseeifagreenlightflashesontheremoteswitch.Thiswill
indicatethatyouhaveeliminatedstandbypowertoConserve’s
“RemoteSwitched”outlets.Devicespluggedintothe“AlwaysOn”
outletswillremainpowered.
Step 7:
Your equipment is now powered,
surge-protected, and ready for use.
Step 8:
When finished using your equipment, turn off
each device as you normally would.
Step 10:
When ready to use your equipment again, firmly
press and release the “|” button on the remote
switch to activate the power to the “Remote
Switched” outlets.
Step 11:
Turn on and use your equipment as normal.
Repeat Step 8 when done.
For complete instructions, see the User Guide
enclosed or visit www.belkin.com/conserve.
6
9
I = ON
I = ON
O = OFF
O = OFF