Belkin OMNIVIEW F1DA104PEA User manual

P75033ea
Belkin Ltd.
Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
[phone]
[phone] fax
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk, The Netherlands
[phone]
[phone] fax
Belkin Tech Support
Europe: 00 800 223 55 460
Belkin GmbH
Hanebergstrasse 2
80637 Munich, Germany
[phone]
[phone] fax
Belkin SAS
130 rue de Silly
92100 Boulogne-Billancourt, France
[phone]
[phone] fax
© 2005 Belkin Corporation. All rights reserved. All trade names are registered trademarks of
respective manufacturers listed. Mac OS and Mac are trademarks of Apple Computer, Inc.,
registered in the U.S. and other countries.
OmniView® KVM-Switch
PRO2 PS/2

User Manual • Manuel de l’utilisateur
Benutzerhandbuch • Handleiding
Manual del usuario • Manuale utente
PRO2 PS/2 Switch with On-Screen Display
Control up to 16 computers from one PS/2 console!
F1DA104Pea
F1DA108Pea
F1DA116Pea
Control
OmniView® KVM-Switch
PRO2 PS/2 OmniView® KVM-Switch PRO2 PS/2
EN Switch with On-Screen Display - Control
up to 16 computers from one PS/2 console
FR Switch avec affichage à l’écran -
Contrôlez jusqu’à 16 ordinateurs à partir
d’une console PS/2!
DE Masterswitch mit Bildschirmmenü -
Zur Kontrolle von bis zu 16 Computern
mit nur einer PS/2-Konsole!
NL Switch met On-Screen Display - Tot 16
computers beheren met slechts één
PS/2-console!
ES Conmutador con OSD (menús en la
pantalla) - Controla hasta 16 ordenadores
desde una sola consola PS/2!
IT Switch con On-Screen Display -
Per gestire fino a 16 computer
da una console PS/2!

Table of Contents
1
2
3
4
5
6
7
8
9
10
Overview
Feature Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Equipment Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Operating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Unit Display Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Installation
Pre-Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Step-by-Step Installation Guide . . . . . . . . . . . . . . . . . . . . . . . . . .9
Single PRO2 PS/2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . .10
Connecting Multiple PRO2 PS/2s (Daisy-Chaining) . . . . . . . . . .12
Powering up the Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Using your PRO2 PS/2
Selecting a Computer Using Keyboard Hot Key Commands . . . .17
AutoScan Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Selecting a Computer Using Direct-Access Port Selectors . . . . .18
Bank Up and Bank Down Scroll Buttons. . . . . . . . . . . . . . . . . . .18
On-Screen Display Menu Control . . . . . . . . . . . . . . . . . . . . . . . . 20
Belkin KVM Switches and Accessories
OmniView KVM Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
OmniView All-In-One KVM Cables . . . . . . . . . . . . . . . . . . . . . . .25
OmniView Accessories and Adapters . . . . . . . . . . . . . . . . . . . .26
PRO2 PS/2 Series FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Overview
1
section
1
2
3
4
5
6
7
8
9
10
1
Congratulations on your
purchase of this Belkin
OmniView PRO2 PS/2
Series KVM Switch
(the PRO2 PS/2). Our diverse
line of KVM solutions exemplifies the Belkin commitment to delivering
high-quality, durable products at a reasonable price. Designed to give
you control over multiple computers and servers from one console, Belkin
PRO2 PS/2s come in a variety of capacities suitable for all configurations,
large or small.
Offering intuitive port indicators, direct-access port selectors, high video
resolution support, and flash upgradeable firmware.
The PRO2 PS/2 also comes with an unparalleled Belkin Three-Year
Warranty.
This manual will provide details about your new PRO2 PS/2, from
installation and operation to troubleshooting—in the unlikely event of a
problem.
For quick and easy installation, please refer to the Quick Installation
Guide included in your PRO2 PS/2 packaging.
Package Contents
• OmniView PRO2 PS/2 Series KVM Switch
• Adjustable Rack-mount Brackets with Screws
• USB Flash Cable
• User Manual
• Quick Installation Guide
• 12-Volt DC, 1-Amp Power Supply
• Registration Card

Overview
1
2
3
4
5
6
7
8
9
10
2
section
1The PRO2 PS/2s allow you to control up to a maximum of 256 PS/2
computers with one keyboard, monitor, and mouse. They support PS/2
input devices (keyboard and mouse) as well as VGA, SVGA, XGA, and
XGA-2 video.
Feature Overview
Hot Keys:
Hot key functionality allows you to select a desired port using
designated key commands. By using a simple hot key sequence
on your keyboard, selecting one computer from as many as 256
computers is instantaneous. For a listing of complete hot key
instructions and commands, see pages 17-19
AutoScan:
The AutoScan feature allows you to set your PRO2 PS/2 to scan and
monitor the activities of all operating computers connected to the
switch—one by one. The time interval allotted for each computer can
be defined or adjusted through the On-Screen Display (OSD) menu.
For complete instructions on AutoScan usage, please refer to page 18.
Video Resolution:
Through a 400MHz bandwidth, the PRO2 PS/2s support video
resolutions of up to 2048x1536@85Hz. To preserve signal integrity at
these higher resolutions, your PRO2 PS/2 requires 75-Ohm coaxial
VGA cabling
Flash Upgrade:
Flash upgradeable firmware allows you to install the latest firmware
for your PRO2 PS/2. This enables your PRO2 PS/2 to maintain
consistent compatibility with the latest devices and computers.
Firmware upgrades are free for the life of your PRO2 PS/2. Refer to
the enclosed flash upgrade instruction document or visit us at belkin.
com for complete upgrade information and support.
On-Screen Display (OSD):
The OSD feature simplifies server management by allowing you to
assign individual names to each connected server throughout the
system. It provides a visual means of switching between computers
and setting the time interval for the AutoScan function.

3
1
2
3
4
5
6
7
8
9
10
Overview
section
1
Front-Panel Push Button:
Direct-access port selectors, located conveniently on the front panel of
the PRO2 PS/2, allow for simple, manual port-selection. Each button
controls a port.
LED Display:
An LED display on the face of the PRO2 PS/2 serves as a status monitor.
An LED next to each direct-access port selector illuminates to indicate
that the console currently controls the corresponding computer. As a port
selector is pushed, the LED next to it will light up. A flashing port LED
indicates that there is no computer connected to that port.
Seven-Segment LED Display:
When daisy-chaining multiple PRO2 PS/2s together, the seven-segment
LED display serves as a quick indicator of the selected BANK.
Equipment Requirements Cables:
To connect to the PRO2 PS/2, each PS/2 computer requires one VGA
cable, one PS/2 keyboard cable, and one PS/2 mouse cable. Keyboard
and mouse cables must have PS/2 male-to-PS/2 male connectors.
Video resolution support of up to 2048x1536@85Hz requires use of a
75-Ohm coaxial VGA cable to preserve signal integrity. VGA cables must
have HDDB15 female-to-HDDB15 male connectors.
Belkin highly recommends that you use OmniView All-In-One PRO Series
Plus Cables. These cables offer the highest quality possible to ensure
optimal data transmission. All-In-One Cables are molded together for
a clean and organized setup; are double-shielded to reduce EMI/RFI
interference; have strain-relief construction for added durability; come
with a ferrite bead for noise immunity; and include PC99 color-coded
connectors for easy identification and connection. The PRO Series Plus
Cables include an industry-standard, 14-pin, coaxial VGA cable and
nickel-plated connectors for high-resolution applications.

1
2
3
4
5
6
7
8
9
10
4
Overview
section
1The following cables are recommended for your PRO2 PS/2:
OmniView All-In-One PRO Series Plus
F3X1105b-XX (PS/2 Style)
(-XX denotes length in feet)
Operating Systems
OmniView PRO2 PS/2 Series KVM Switches are for use on CPUs
using:
Platforms:
• Windows® 95/98/2000/Me/NT®/XP
• DOS
• Turbolinux® and all Linux® distributions
• Novell® NetWare® 4.x/5.x
Keyboards:
• Supports 101-/102-/104-key keyboards
Mice:
• Microsoft® system-compatible PS/2 mice having 2, 3, 4, or 5 buttons
• Microsoft system-compatible PS/2 wireless or optical mice
Monitor:
• VGA
• SVGA
• MultiSync®

5
1
2
3
4
5
6
7
8
9
10
Overview
section
1
Side View of the PRO2 PS/2:




 


 



BANK DIP switch
(may be located on
the back in some
models)
FLASH DIP switch
(may be located on
the back in some
models)

1
2
3
4
5
6
7
8
9
10
6
Overview
section
1Front View of the PRO2 PS/2:
F1DA108Pea
Back View of the PRO2 PS/2:
F1DA108Pea
Autoscan button LED for selected
port identification
7-segment LED
for selected BANK
identification
Direct-access
port selectors Manual BANK
scroll buttons
Console VGA Computer VGA port
Slave Input
Master Input/Slave Output
Console PS/2 mouse/keyboard ports
Computer PS/2
mouse/keyboard ports
Flash Upgrade port
DC power jack

7
1
2
3
4
5
6
7
8
9
10
Overview
section
1
Specifications
Part No.: F1DA104Pea, F1DA108Pea & F1DA116Pea
Power: 12-Volt DC, 1-Amp power adapter with center-pin positive
polarity Daisy-Chain: Maximum of 16 KVM Switches
Computer Connections Supported:
4 (F1DA104Pea)
8 (F1DA108Pea)
16 (F1DA116Pea)
Keyboard Emulation: PS/2
Mouse Emulation: PS/2
Monitors Supported: VGA, SVGA, MultiSync, and LCD (optional adapter
may be required)
Max. Resolution: 2048x1536@85Hz
Bandwidth: 400MHz
Keyboard Input: 6-pin miniDIN (PS/2)
Mouse Input: 6-pin miniDIN (PS/2)
VGA Port: 15-pin HDDB type
Port LED Indicators:
4 (F1DA104Pea)
8 (F1DA108Pea)
16 (F1DA116Pea)
Enclosure: Metal enclosure with high-impact plastic faceplate
Dimensions:
(F1DA104Pea) 11 x 1.75 x 6 inch (279mm x 44.5mm x 150mm)
(F1DA108Pea)17.25 x 1.75 x 7.5 inch (438mm x 44.5mm x
190mm)
(F1DA116Pea) 17.25 x 3.5 x 7.5 inch (438mm x 89mm x 190mm)
Weight:
(F1DA104Pea) 5.3 lbs. (2414.5 grams)
(F1DA108Pea) 9.2 lbs. (4181.5 grams)
(F1DA116Pea) 12 lbs. (5472.5 grams)
Operating Temp.: 32º to 104º F (0~40º C)
Storage Temp.: -4º to 140º F (20~60º C)
Humidity: 0-80% RH, non-condensing
Warranty: 3 years
Note: Specifications are subject to change without notice.

1
2
3
4
5
6
7
8
9
10
8
Installation
section
2
Pre-Configuration
Where to Place the PRO2 PS/2:
The enclosure of the PRO2 PS/2 is designed for standalone or rack-
mount configuration. The 8- and 16-port PRO2 PS/2s are natively
rack-mountable in standard 19-inch server racks. Rack-mount
hardware is included with these switches for a study rack installation.
An optional rack-mount kit (F1D005) is available for use with the 4-
Port PRO2 PS/2.
Consider the following when deciding where to place the PRO2
PS/2:
• whether or not you intend to use the direct-access port selectors;
• the lengths of the cables attached to your keyboard, monitor,
and mouse;
• the location of your CPUs in relation to your console;
• and the lengths of the cables you use to connect your computers
to the PRO2 PS/2.
Cable Distance Requirements:
VGA signals transmit best up to 25 feet. Beyond that length, the
probability of video degradation increases. For this reason, we
recommend that the length of the cables between the PRO2 PS/2 and
the connected computers does not exceed 25 feet.
Note: If you need your console to reside further than 25 feet from
the PRO2 PS/2, we recommend using the Belkin CAT5 Extender
(F1D084vea2) with a standard CAT5 UPT cable. By using this device,
you may increase the distance between your PRO2 PS/2 and your
keyboard, mouse, and monitor by as much as 300 feet without risking
signal degradation.
Cautions and Warnings:
Avoid placing cables near fluorescent lights, air conditioning
equipment, or machines that create electrical noise (e.g., vacuum
cleaners).

9
1
2
3
4
5
6
7
8
9
10
Installation
section
2
Step-by-Step Installation Guide
Cautions and Warnings:
Before attempting to connect anything to the PRO2 PS/2 or your
computer(s), please ensure that everything is powered off. Plugging
and unplugging cables while computer(s) are powered on may cause
irreversible damage to the computer(s) and/or the PRO2 PS/2(s). Belkin
Components is not responsible for damage caused in this way.
Installing the PRO2 PS/2 into a Server Rack:
Bracket Installation (F1DA108Pea and F1DA116Pea only)
Eight- or 16-Port PRO2 PS/2s include adjustable mounting brackets ideal
for
installation in 19-inch racks. The mounting brackets feature three
adjustment positions to allow the faceplate of the PRO2 PS/2 to mount
flush to your rack-mounted servers, or to the rack. Please follow these
simple steps to achieve the desired adjustment. The 4-Port PRO2 PS/2
requires an optional mounting kit (F1D005).
1. Remove the adjustable brackets from the box. (The adjustable
brackets allow you to set the PRO2 PS/2’s face flush with the ends of
the rails or to extend the PRO2 PS/2 past the front of the rails).
2. Determine how far you would like the PRO2 PS/2 to protrude from the
rack.Select a bracket-hole scheme.
3. Attach the bracket to the side of your PRO2 PS/2 using the Phillips
screws provided. (Refer to diagram above).
4. Mount the PRO2 PS/2 to the rack rail assembly.
Note: If this PRO2 PS/2 will be daisy-chained to another PRO2 PS/2, set
the BANK address prior to installing on a rack. Refer to the section in this
user manual labeled “Connecting Multiple PRO2 PS/2s (Daisy-Chaining)”.

1
2
3
4
5
6
7
8
9
10
10
Installation
section
2
Your PRO2 PS/2 is now mounted securely into the bracket and you
are ready to connect cables to the back of the unit.
Single PRO2 PS/2 Installation
This section provides complete instructions for the hardware setup of
a single PRO2 PS/2. (F1DA104Pea, F1DA108Pea, and F1DA116Pea)
PS/2 Installation: Keyboard, Video, and Mouse Connections
Connect the Console:
1. Connect the monitor to
the PRO2 PS/2. Attach
your monitor cable to the
HDDB15 female port on
the back of the PRO2 PS/2
labeled “Console VGA”.
2. Connect the PS/2 keyboard
cable to the keyboard port
on the back of the PRO2
PS/2 in the “Console”
section.
3. Connect the PS/2 mouse
cable to the mouse port on
the back of the PRO2 PS/2
in the “Console” section.
Attach the power supply to the DC power jack labeled “DC 12V, 1A”
located on the rear of the PRO2 PS/2. Once the power is connected to
a power source, the LED for port 01 will begin flashing. Sequentially
push the direct-access port selectors for ports 01 through 08 (04 for
F1DA104Pea and 16 for F1DA116Pea). The corresponding LED should
flash as each button is pressed, indicating that the port is ready for
connecting your servers (computer connection).








 














 



 



























 
























































































 







 







11
1
2
3
4
5
6
7
8
9
10
Installation
section
2
Connect the Computer:
1. Using an OmniView KVM Cable (Belkin part# F3X1105b-XX, plug in the
male VGA connector to the VGA port on the computer. Connect the
other end (the female connector) of the VGA cable to the back of the
PRO2 PS/2 labeled “VGA 01”.
2. Connect the PS/2 keyboard and PS/2 mouse connectors of the cable
to the keyboard and mouse ports on the computer. Connect the other
ends of the cables to the keyboard and mouse ports located directly
underneath VGA 01 on the PRO2 PS/2 (Belkin part # F3X1105b-XX).
3. Repeat steps 1 and
2 for each additional
PS/2 computer you
wish to connect.

 





 







 



 
 



 







1
2
3
4
5
6
7
8
9
10
12
Installation
section
2
Connecting Multiple PRO2 PS/2s (Daisy-Chaining)
You can daisy-chain up to 16 PRO2 PS/2s together, giving a server
administrator control over a maximum of 256 computers. When daisy-
chained together, each unit is referred to as a “BANK” and assigned
an address. The Console keyboard, mouse, and monitor connects to
BANK 00 and is referred to as the “Master” switch. BANKs 01 through
15 are referred to as “Slave” switches.
Note: A daisy-chain cable (F1D108-CBL) is required to daisy-chain
each PRO2 PS/2 and is available through your Belkin reseller or online
at belkin.com.
All PRO2 PS/2s feature a “BANK DIP” switch. The BANK DIP switch is
used for proper identification and use of PRO2 PS/2s in a single-unit
or daisy-chain configuration.
• For a single-unit configuration, set the BANK DIP switch on the
PRO2 PS/2 to the “Master” (BANK address 00) setting. This is the
factory default setting.
• For multi-unit configuration, the BANK DIP switch on the Master
unit must be set to “BANK address 00”. Slave units must be set to a
unique BANK address (from 01 through 15). Refer to the chart below
for BANK DIP switch settings.

13
1
2
3
4
5
6
7
8
9
10
Installation
section
2
BANK DIP Switch Configuration Chart
DIP SWITCH# BANK ADDRESS
1 2 3 4 5 6
ON ON ON ON ON ON BANK 00 MASTER (default)
ON ON OFF ON ON ON BANK 01 SLAVE
ON ON ON OFF ON ON BANK 02 SLAVE
ON ON OFF OFF ON ON BANK 03 SLAVE
ON ON ON ON OFF ON BANK 04 SLAVE
ON ON OFF ON OFF ON BANK 05 SLAVE
ON ON ON OFF OFF ON BANK 06 SLAVE
ON ON OFF OFF OFF ON BANK 07 SLAVE
ON ON ON ON ON OFF BANK 08 SLAVE
ON ON OFF ON ON OFF BANK 09 SLAVE
ON ON ON OFF ON OFF BANK 10 SLAVE
ON ON OFF OFF ON OFF BANK 11 SLAVE
ON ON ON ON OFF OFF BANK 12 SLAVE
ON ON OFF ON OFF OFF BANK 13 SLAVE
ON ON ON OFF OFF OFF BANK 14 SLAVE
ON ON OFF OFF OFF OFF BANK 15 SLAVE
Note: “On” is the down position.
Example:
Four 8-Port PRO2 PS/2s (F1DA108Pea) are daisy-chained together for
controlling up to 32 computers. The DIP switch on the Master unit is
set to “BANK 00” (factory default) and the Slave units are each set to a
unique BANK (between 01 and 15).

1
2
3
4
5
6
7
8
9
10
14
Installation
section
2
Before You Begin:
1. Make sure that all computers are powered off and that each PRO2
PS/2 has been assigned a unique BANK address.
2. Place Master and Slave switches in the desired location. Make sure
all are turned off and unplugged from the power source.
3. Connect the Console monitor, keyboard, and mouse to the Console
ports of the Master switch or Bank 00, as described previously in
this installation guide.
Connecting the Master Switch to the First Slave Switch:
4. Using the daisy-chain cable (F1D108-CBL), connect one end of the
cable to the “Master Input/Slave Output” port on the Master switch
(BANK 00).
5. Connect the other end of the daisy-chain cable to the “Master
Input/Slave Output” port of the first Slave switch (BANK 01).
Adding Additional Slave Units:
6. Using the daisy-chain cable (F1D108-CBL), connect one end of the
cable to the available daisy-chain port labeled “Slave Input” on the
Slave switch (for example, BANK 01).
7. Connect the other end of the daisy-chain cable to the “Master
Input/Slave Output” port of the Slave switch that you are adding
(for example, BANK 02).
8. Repeat steps 6 and 7 for additional PRO2 PS/2s you wish to daisy-
chain together.

15
1
2
3
4
5
6
7
8
9
10
Installation
section
2
   



 






 



  














   
 
 










 


 





 













  
 
 








 



 




 











 





 










 




 





 





S l eva I upn t
M
s
a t e r
I
u
pn t S/ l
e
v
a
O u t u
p
t
S l
e
v
a
I
up
n
t
M
s
a
t
e
r
I
upn
t
S
/
l e
va
O
u
t up t
S
l
e
v
a
I
up
n t
M
s
a
t
e
r
I
upn
t
S/ l eva
O u
t
up
t
S
l
eva
I
up
n t
M
s
a
t e r
I
u
pn
t
S
/
l ev
a
O u
t
up
t
Example of Daisy-Chain Configuration:
Connecting the Computers:
9. Connect all computers to the Master and Slave switches. Refer to
“Single PRO2 PS/2 Installation” on page 10 for instruction on how to
connect the Console and the computers to the PRO2 PS/2.
10. Connect the power supply to the Master switch. Power up the Master
switch. You should see the Master switch light up and display the
digits “00”, indicating its BANK address.
11. Power up the Slave switches sequentially, beginning with Bank 01, by
connecting each unit’s power supply. Each switch should display its
corresponding BANK address number as it is powered up.
Note: If the PRO2 PS/2s do not enumerate correctly, reset the Master
switch (BANK 00) by simultaneously pressing the “BANK +” and “BANK
–” buttons. You can also reset the Master switch to detect newly added
Slave switches. If the switches still do not enumerate correctly, check
that all switches have the correct BANK address assigned to them and
that all daisy-chain cables are connected properly.
12. Verify that the Master unit has detected all Slave switches by scrolling
through the BANKS using the BANK up and BANK down buttons. If all
Slave switches are detected properly, the LED display on the Master
switch will register and display the attached Slave switch’s BANK
address.
cable 1
cable 2
cable 3
Master unit (BANK 00)
Slave unit (BANK 01)
Slave unit (BANK 02)
Slave unit (BANK 03)

1
2
3
4
5
6
7
8
9
10
16
Using your PRO2 PS/2
section
3
Powering up the Systems
Once all cables have been connected, power up the computers that
are attached to the PRO2 PS/2. All computers can be powered on
simultaneously. The PRO2 PS/2 emulates both a mouse and keyboard
on each port and allows your computer to boot normally.
The computer connected to port “1” will be displayed on the monitor.
Check to see that the keyboard, monitor, and mouse are working
normally. Proceed to do this with all occupied ports to verify that all
computers are connected and responding correctly. If you encounter
an error, check your cable connections for that computer and reboot.
If the problem persists, please refer to the Troubleshooting section in
this manual.
Using Your PRO2 PS/2:
Now that you have connected your Console and computers to your
PRO2 PS/2, it is ready for use. Select connected computers by
either the direct-access port selectors, located on the front panel of
the PRO2 PS/2, using the On-Screen Display, or by using hot key
commands through the Console keyboard. It takes approximately 1-
2 seconds for the video signal to refresh after switching computers.
Re-synchronization of the mouse and keyboard signals also occurs.
This is normal operation and ensures that proper synchronization is
established between the Console and the connected computers.

17
1
2
3
4
5
6
7
8
9
10
Using your PRO2 PS/2
section
3





�






�
��
�
�
�
��
�





�






�
��
�
�
�
��
�





�






�
��
�
�
�
��
�
Selecting a Computer Using Keyboard Hot Key Commands:
Switch to the next or previous port with simple keyboard key sequences
using the “Scroll Lock” key and either the up or down arrow keys. To
send commands to the PRO2 PS/2, the “Scroll Lock” key must be
pressed twice within two seconds. The PRO2 PS/2 will beep, confirming
that it is in hot key mode. Next, press the up or down arrow keys, and the
PRO2 PS/2 will switch to either the prior port or the next port.
With a single-switch configuration (no daisy-chained switches), you can
switch directly to any port by entering the two-digit number of the port
you wish to access. For example, if you press “Scroll Lock”, “Scroll
Lock”, “02”, the PRO2 PS/2 will switch to the computer on port 2 located
on BANK 00.
Note: You will have approximately five seconds to complete each hot key
sequence.
With daisy-chain switch configuration, you can switch between BANKs
by pressing “Scroll Lock”, “Scroll Lock”, “Page Up”, to switch to the
previous BANK. Press “Scroll Lock”, “Scroll Lock”, “Page Down”, to
switch to the next BANK.
Switch to next active port—Down arrow Switch to next active port—Up arrow
Switch to BANK 00, Port 2—(02)
Switch to previous BANK—Page Up Switch to next BANK— Page Down