Belleze Brent 014-HG-31020 User manual

Brent Bed with Drawer
www.belleze.com
[e-mail]
1-800-682-6376
@bellezefurniture
FOLLOW US: CONTACT INFO: ITEM NO. 014-HG-31020
The instruction booklet contains IMPORTANT
safety information. Please read it in full and
keep it for future reference.

2
LB
Estimated time for assembly:
Weight limitations are as follows:
50 mins
Scan this QR Code
to view our online tutorial
Maximum Load
700 lb
Maximum Load
30 lb
Maximum Load
30 lb

3v.12082022
Assemble the furniture on an empty carton, carpet, or rug to prevent scratches
or damage.
For safety, please keep pets and children away from the assembly area.
Ensure the product is fully assembled before use. If you are missing any
hardware or products, do not use it until you have restored the missing parts.
This furniture requires 2 people for assembly.
Read this instruction manual prior to assembly to familiarize yourself with the
various steps.
sure that no parts are missing or damaged before assembly. Do not destroy or
discard any packaging until you are certain that you have all the necessary parts
for assembly.
Hand tight all hardwares and careful not to over tighten to avoid damaging the
product.
CAUTION
There are small components used in the construction of this product.
Loose items should be kept away from pets and children to avoid a choking
hazard.

4
PACKAGE CONTENTS
1
12
4
5
7
8
6
11
12
13
13
14
14
15
3
9
10
10

5v.12082022
PACKAGE CONTENTS
CODE DESCRIPTION QTY
1 Headboard Frame 2
2 LED Top Panel 1
3 Back Rail 1
4 Headboard 1
5 Socket Panel 1
6 Cross Rail 1
7 Side Rail 2
8 Footboard Slat 1
9 Center Support Beam 1
10 Support Post 2
11 Support Rail 1
12 Slat 12
13 Drawer Front Panel 4
14 Drawer Tray 4
15 Drawer Roller 16
Required tools for assembly (Not included)

6
PACKAGE CONTENTS
16x + 1x
14x + 1x
2x + 1x
3x + 1x
2x
4x + 1x
1x
1x 2x
40x + 2x
1x
M8 x 14 M8 x 10 M4 x 10 M8 x 14
M8 x 35
M8 x 55
AC
BD
E
FGH
K
IJ
M4 x 12
Install all hardware perpendicular to the opening.

7v.12082022
I
I
5
1
J
Assemble the power outlet hub to the socket panel (5).
2x
E
M4 x 12

8
6
1
1
2
4
Leave bolts 80% tightened.
Assemble the LED top panel (2), headboard (4), and cross rail (6)
between the headboard frames (1).
Be aware of the orientatioin of the rail.
10x
E
2
M8 x 35

9v.12082022
1
1
E
3
Leave bolts 80% tightened.
Assemble the back rail (3) between the headboard frames (1).
Be aware of the orientatioin of the rail.
10x
E
M8 x 35
3

10
4
1
1
D
Assemble the socket panel (5) on top of the back rail and the headboard
(3, 4).
LED strip should be installed to the
round corner of the panel.
5
3
4
Leave bolts 80% tightened.
6x
D
M8 x 14
2xK
K
LED strip should be installed to the
round corner of the panel.
Install wire clamp,this is not a lixed position,
the specifie position can be adjusted at will.