Belmint BEL-SEAT User manual

SHIATSU BACK
MASSAGE SEAT
1-844-423-5646
Phone
[email protected]
Email
www.belmint.com
Website
@belmintproducts
Instagram
@belmintsproducts
Facebook
Sometimes peace is hard to find
But good service shouldn’t be
At Belmint, we strive to provide our customers with ultimate relaxation.
If you encounter any issues with the performance of your device,
our authorized service personnel are here to help.
No knead to worry
Preventing damage and injury
Before each use, check your device for any damage, especially to the power cord or
other electrical components. To reduce the risk of damage, do not carry the device by
the cord.
This device is not a toy. Keep out of reach of children and do not leave unattended. Do
not allow dependents to use this device without supervision.
This device is intended for use on the back only. Do not use on bony areas or joints
such as elbows or knees.
For personal use only—as intended/directed. This device is not intended as a
substitute for medical treatment. Anyone with an injury, swelling, skin condition, other
medical condition, recovering from surgery, or women who are pregnant/nursing
should consult their doctor before using this device. This device is not recommended
for use by diabetic patients.
Always unplug the device immediately after using.
Do not use this device while bathing or place the device near where it could fall into a
tub or sink. If the device does fall into water, unplug before retrieving.
Do not drop or insert any object into any opening of the device.
Do not operate this device near where aerosol sprays are being used or oxygen is
being administered.
Do not use this device on the floor, while lying in bed, or while operating a vehicle.
BEL-SEAT 110 - 240V
50 - 60Hz
0.8A Max
12V DC
2.5A
30 W
Rated Power
Rated OutputModel Rated Input
Check, then chill
Got all these?
Shiatsu Back Massage Seat | Power Cord | 12 V Car Adapter | User Manual

Congratulations on your purchase!
You’re on your way to better self-care
When it comes to everyday life, it seems like someone always wants
something from us—so much so that we often forget to ask ourselves
one important question: “What do I want?”
Not only do we forget to think about ourselves, we forget to take time
for ourselves as well. That’s where Belmint comes in. We’re committed
to getting you some ‘me time’ with the help of our luxuriant, yet
affordable, self-care tools. This incredible Shiatsu Massage Seat
Cushion is the cream of the crop: using cutting-edge technology, it
brings a spa-grade reflexology massage into the comfort of your own
home. Now, you can transform any seat into the ultimate relaxation
experience.
Feeling the pressure at work? Turn your office chair into a shiatsu
seat—and get your work done at the same time. Too tense to enjoy
time with your family? Take a few minutes to relax into an at-home
massage session, and you’ll be limber enough to play catch with the
kiddos. Dreading that long carpool commute? This life-enriching
device comes with a 12-volt car adapter, so you can ease your tension
on the go! Like all Belmint products, your massager is crafted from
high-quality, durable materials to ensure maximum comfort. Rolling
and kneading nodes work together to soothe sore muscles, release
pressure on pinched nerves, and improve circulation. You can even
take things up a notch with calming heat and invigorating vibration
options. This device is optimized for efficiency, so anyone can make
time for ‘me time’—even if they only have five minutes. Choose from
5-, 10-, or 15-minute sessions and let your Belmint machine get to work.
We all deserve to get what we want once in a while. With Belmint
innovations, bliss is as close as the press of a button.
To celebrating your comfort,
The Belmint Team
Parts & Features
12
Ergonomic Design for Comfort
The unique design is engineered to ensure maximum comfort with the strategically
placed massage nodes to mimic a real massage therapist's hands.
Switchable Heat
The switchable heat function promotes an Increase In blood and oxygen flow to
soothe your muscles.
Characteristic Functions
Easy to use controller
Three massage areas for Back
Multiple Massage Modes
Three levels of massage intensity
Lightweight and easy to carry and store

1.Place the device on a comfortable chair near a polarized wall socket,
making sure that the crease between the bottom and back of the cushion
aligns with the same crease on your chair.
2. If you have long hair, be sure to tie it up to avoid it being caught in any
part of the device. Do not wear loose clothing or jewelry.
3. Take a seat with your feet flat on the floor and your knees positioned
above your ankles. Do not cover yourself or any part of the device with a
blanket or towel, or the device may become overheated.
4. Turn the device on. Press the timer button to choose your preferred
session time.
5. Choose your preferred settings (see the next section for more informa-
tion).
6. The device will automatically turn off after 5, 10, or 15 minutes—depend-
ing on the timer you set. You can also turn the device off manually by press-
ing the power button until it clicks.
7. Allow the device to cool completely before using it again. Do not use for
more than 15 minutes at one time.
8. When you are finished with your device, clean and store it according to
the instructions.
Massage Focus (upper back, lower back, full back)
On your remote, you’ll see three buttons next to the cushion diagram. These
allow you to choose whether you want your massage to be focused on your
upper, lower, or entire back. Whatever setting you choose, the correspond-
ing area of the cushion diagram will light up.
Shiatsu (Low, High)
Customize your preferred pressure by choosing either low-intensity or
high-intensity massage. Simply press the “Shiatsu” button once or twice to
alternate between settings.
Vibration (Low, Medium, High)
Press the “Vibration” button once, twice, or three times to choose between
the low, medium, or high settings. Press the button a fourth time to cycle
back to “low”.
Spot Target
To target the pressure of the kneading massage nodes to specific areas of
your back, simply press the “Spot” button to turn the feature on, then use
the up and down arrows to move the targeted massage nodes to different
positions along your spine.
Heated Massage
Need a little help boosting relaxation or improving circulation? Press the
“Heat” button to initiate a heated massage session. If the heat becomes too
intense for your preference, simply press the button again to turn the heat
off. The session will still continue until the end of your set time.
Demo
Check out all of this device’s amazing features with a convenient demo
session. As the device moves through different massage methods, the
targeted areas will light up on the cushion diagram on the remote. When all
features have been demonstrated, the device will automatically shut off.
34
Before things get awesome
To prevent potential injury or property damage, please read
this entire manual before operating your device. Keep it on
file for future reference.
Time to Relax
Using your Device
The many buons of bliss
More about your device seings

56
Problem Solution
Device will
not turn on.
Make sure the device is plugged in, both at
the base of the seat and also at the wall
socket.
Press the On/Off button until you hear a
click. If the button is not fully depressed,
the device will not turn on.
Massager nodes are
rotating at a reduced
speed.
The amount of pressure being placed on
the device may be too heavy for the nodes
to work properly. Avoid pressing your
weight back onto the nodes. Instead, allow
your back to rest lightly against the
cushion.
Massager stops
working.
Press the On/Off button until you hear a
click. The device may have turned off
automatically due to the timer feature.
The device may have overheated. Allow it
to cool completely before attempting to
turn it on again.
To Clean
Turn the device off, unplug it, and allow it to cool completely. Then, gently
wipe the outside of the unit using a clean, damp cloth. For stubborn dirt or
stains, dampen the cloth with mild soap and water. Keep all vents, buttons,
and openings free of lint and dirt. Do not immerse the unit in water and do
not use any harsh cleaners.
To Store
Make sure that the device is clean and dry. Bind the cord gently with an
electrician-approved fastener. Do not wrap the cord around the device.
Store the device in a cool, dry place away from damaging elements.
To Maintain
For best results, clean and store the device after each use. If any part of the
device becomes damaged, contact Belmint customer support using the
service information on back cover.
Use this guide to help diagnose simple problems with your device.
Please feel free to contact us if you have any questions or concerns.
If any of these issues persist or if any part of the device becomes damaged,
discontinue use and return to the service center for evaluation and repair.
Do not attempt to modify or repair the device yourself; doing so will nullify
your purchase warranty and could risk your safety.
Until Next Time
Maintaining your Device
Keeping the peace
Troubleshooting Guide