BeltUpp Straight Up Safety Install guide

FITTING INSTRUCTIONS
ENGLISH
BeltUpp has been designed:
•For children over 15kg and
approximately 4 years old in
Group 2 seat.
• To keep your child in a safe
and comfortable in an
upright position.
• To be easy to install, use
and adjust.
•To aid road safety by
giving a safer seating
position for the child and
a more focussed driver.
FITTING INSTRUCTIONS
ENGLISH

FITTING INSTRUCTIONS
ENGLISH
The BeltUpp strap comes in two parts:
Part 1, the buckle short strap and the
locking clip.
Part 2, the tongue, long adjustable
strap and the slider clip.
How to install
Keep the child seat in the correct position
in the car. Separate part 1 and 2 by
pressing the red release button.
Locate the bottom anchor point of the
cars integral adult 3 point seat belt. This
is normally down at the base of the seat
on the same side as the door opening.
Attach the locking clip on part 1 to the
strap at the base of the seat. Make sure
the buckle is on the outside of the adult
strap (facing outwards) so that it can be
easily operated. (Diagram 1)
The buckle should be outside the seat so
that when it is done up it is not on
pressing the child’s leg or lap.
Diagram 1
Buckle not on lap or leg
Buckle facing outwards
Base of seat
Locking
Clip
Locking clip added to
Adult strap

FITTING INSTRUCTIONS
ENGLISH
Part 2 can now be easily attached behind
the seat.
Locate the retracting adult belt as it goes
through the top eyelet of the group 2 seat.
This will be on the same side as the
anchor point.
Just behind the eyelet at the back of the
seat add the slider clip to the adult belt.
(Diagram 2) This will allow the seat belt
to be pulled out and retracted easily.
Follow the long adjustable strap now so it
passes through the spare eyelet at the
other side of the seat. The tongue now
can be adjusted to meet the buckle and
can be locked and released easily.
Diagram 2
Car Adult
3 Point Strap
BeltUPP Strap
Back of seat
Slider
Clip
Spare Eyelet

FITTING INSTRUCTIONS
ENGLISH
Once the child is in place and the belt
connected the adjuster can be moved to
keep a tight and upright position. This will
ensure, even when asleep, that a safe and
comfortable position is maintained.
The child should now have an ‘X’ pattern
across their chest with the addition of the
BeltUpp strap. (Diagram 3)
Real video footage for the fitting of our
device and crash test data can be
found at www.beltupp.com
Diagram 3
Adult
3 Point Strap
BeltUPP Strap
Spare Eyelet
‘X’ pattern
over chest

FITTING INSTRUCTIONS
ENGLISH
WARNINGS
There is no warranty either expressed or implied that the use of this product will eliminate the
possibility of any injury that may otherwise occur. This is only for use with children over 15kg
and approximately 4 years of age. It is an additional comfort and restraint mechanism and
should only be used in conjunction with the existing adult belted system. Ensure the child seat is
fitted correctly and safely before adding BeltUpp.
The straps should cross in an ‘X’ pattern on the chest only. This product is designed to aid in the
prevention of injuries by keeping the child in the correct position in the seat. We cannot be held
responsible for any injuries that may occur through incorrect fitting of the seat or our device.
Always replace child restraint mechanisms and additional attachments after an accident.
Diagram 3